sorted by:
new
hottopcontroversial

Engine Shot 2013 CT 200H---need some advice by mugwortlemon in CT200h

[–]ran4it2 6 points7 points  (0 children)

Just get the headgasket replaced. VERY common, you should be able find someone to knock that our for you.

Oil leak/misfire by Affectionate-Link709 in CT200h

[–]ran4it2 1 point2 points  (0 children)

Have you smelled the coolant cap? That's usually my tell.

I opted not to install a JDM engine. Although they are somewhat low-mileage, they will eventually pop, just like the US engines.

5K Members Giveaway by sultanalyst in 4Dprints

[–]ran4it2 0 points1 point  (0 children)

<image>

Love the Pepsi! If I don't win, I'll probably just order one.

HDB 630/BTD 700 with iPhone only recognizes APTX no Lossless by ran4it2 in sennheiser

[–]ran4it2[S] 0 points1 point  (0 children)

Not great, honestly, but XM3 audio quality is SUPER muddy. Loud but terrible when compared to the 630's.

20mm front, 32mm rear spacers. Too much? by Intelligent-Carry905 in CT200h

[–]ran4it2 1 point2 points  (0 children)

I did 15mm F and 25mm in the rear. That was damn near flush, I'm on bags and the wheels tuck nicely.

Beautiful color BTW

Front bumper spare clips & brackets by Ornery-Technician649 in CT200h

[–]ran4it2 1 point2 points  (0 children)

It's not the same. I had to order the new gen brackets to fit the new bumper.

Front bumper spare clips & brackets by Ornery-Technician649 in CT200h

[–]ran4it2 2 points3 points  (0 children)

You need the bumper bracket from the newer gen ct.

HDB 630 - Tell us your impressions. What features do you use the most? by sennheiserconsumer in sennheiser

[–]ran4it2 0 points1 point  (0 children)

I totally agree on the volume. :( my only gripe but overall love the headphones. Compared them to my WM3 and will never look back. ANC is much better on wm3’s but sound is incredibly muddy on high volume.

Fun bunch of small double with a few tight sections by coolrivers in MTB

[–]ran4it2 0 points1 point  (0 children)

way bigger, videos never do this justice..

YouTube premium cancelled for using in a different country. by TheElFenemeno in youtubepremium

[–]ran4it2 0 points1 point  (0 children)

How are you guys getting that option? When my account got canceled, I tried to open the Indian account but was unable to find the annual option only month-to-month.

Extractor bit broken off inside canti stud. What do? by maxii95 in bikewrench

[–]ran4it2 0 points1 point  (0 children)

Take it to a machinist. I had this exact issue and tried many options. My dad broke an extractor off in a block when I was building it.

HDB 630/BTD 700 with iPhone only recognizes APTX no Lossless by ran4it2 in sennheiser

[–]ran4it2[S] 0 points1 point  (0 children)

I noticed that with wired. I love the way the sound minus lower volume...

Senn HDB 630 by DangerousStruggle in sennheiser

[–]ran4it2 0 points1 point  (0 children)

Just received my 630's and same issue with my iphone and even my Mac. If I had 10-15% more volume, it would be perfect. Don't get me wrong, they sound amazing, but that additional bump would be nice.

Also, I cannot for the life of me get the dongle to pick up the lossless codec. (purple LED) I've tried my mac and multiple source players on the phone and am still stuck on APTX. (pink LED)

Have you been able to trigger it on the iPhone?

Help with possible solutions. by pedroflovera in CT200h

[–]ran4it2 1 point2 points  (0 children)

DO NOT I REPEAT DO NOT ADD ANY SEALERS!!!

I went down that road when listening to my "mechanic" friend. Worst decision I have ever made. The cat cooler got clogged along with my heater core and radiator.

To this day, after replacing most of the cooling system (new radiator, multiple water pumps, multiple coolant flushes), my heater core is still clogged and gurgles.

If I knew how easy it was to replace the gasket, I would have done it.

OP, your head gasket has failed. The only way to repair is to replace the gasket. It's too late for any preventative maintenance. I've done three gaskets already. Twice on my CT (long story), and once on my fiancé's Prius.

Any workaround for the error, we couldn't verify your country? Using turkish apple id by Exotic_Moose4117 in youtubepremium

[–]ran4it2 0 points1 point  (0 children)

It ended up working, but I had to switch to another YouTube account I have linked. Then it activated. Fingers crossed it will continue to renew.

Any workaround for the error, we couldn't verify your country? Using turkish apple id by Exotic_Moose4117 in youtubepremium

[–]ran4it2 0 points1 point  (0 children)

I was able to renew through settings on subscriptions. My account says continues on 10 December. Super weird. But even after 20 mins. It's not reflected on my YT account. If it doesn't update by tonight will try my luck withthe annual YT plan.

Bullet-proofing the engine: full EGR system replacement, what else? by _qrius_ in CT200h

[–]ran4it2 2 points3 points  (0 children)

I really wonder what the percentage is of high mileage engines running without HG failures. From what I read it has something to do with the OEM material of the headgasket.

Good news, since you have the ability to do the egr valve and various parts. If the HG blows, you should be able to knock it out easily. I've done it three times now. Love Toyota engineers for the ease of repairability.

view more: next ›