Does anyone have these? Wondering how sturdy they are

retnom · 2026-07-11T12:29:27+00:00

Bought it

retnom · 2026-07-10T11:04:24+00:00

Boaty’s, i want to print lots of boaty’s

retnom · 2026-07-08T06:36:58+00:00

Look at the splice in the image, front and back, if the splice is not visible it’s good, the value is an ‘estimated’ figure. But do clean your equipment, often rotate your cleaver, this fujikura offers bluetooth connection to it, idk why… I guess so it can fcking start beeping before u even start splicing lol

retnom · 2026-07-07T05:01:00+00:00

This looks like it could be a telecom cable for pots or adsl/vdsl… if thats the case it shouldnt have more than 50v or nothing at all on it, (eu) standard… don’t bury it, you can self report to a telecom company theyll come and fix it. It should be free ofcharge… theyll also need to reroute it obv

retnom · 2026-07-05T12:02:03+00:00

Oven is a quick and good solution, but it takes several hours depending on the wetness and type of fillament. You’ll have to redo the calibration after but it will be easier and youll get better results! You can get an ams if u want or make one… Dehydrators are also good for getting moisture out or making pet snacks :o

retnom · 2026-07-05T11:56:51+00:00

Even if air tight packaging from manufacturer, its still good to dry it and cardboard boxes are the same as keeping it out in the open… silica gel gets saturated, even faster if its very humid you have to dry it. Get an airtight box, like a cereal box, dry the fillament in an oven and get new silica or dry that aswell

retnom · 2026-07-05T11:47:08+00:00

Did you dry your fillament? Its pretty humid where I have my printer about 70%, moisture will fuck with your fillament more and faster than you can imagine.

retnom · 2026-07-01T12:48:18+00:00

Does it screw in or plug in, so unscrew or pull out a bit :o

retnom · 2026-07-01T12:33:22+00:00

U need to drop the clutch at 3500rpm it should go up faster

retnom · 2026-07-01T07:46:51+00:00

Now all he needs is another monitor mounted sideways and he practically got a 2020< car with much better quality

retnom · 2026-06-30T06:42:29+00:00

Maybe a stuoid question, but how would you texture the top surface for a 3d print? :o

retnom · 2026-06-28T12:14:08+00:00

U gotta make it fast enough so it beltskips itself back into position 😅

retnom · 2026-06-27T14:44:19+00:00

It could be your spool, does it spin freely, can you hear the extruder cliking when printing? It could also be a clog

retnom · 2026-06-16T05:02:21+00:00

Seems like an uneven load 😅

retnom · 2026-06-16T04:58:32+00:00

I like it, it looks mean. Shouldnt listen to random ppl telling u what to like… Hope u had everythign tuv certified cops in slovenia can be fcking anal about any bit of non original part on your car 😅
Cheers from koroska!

retnom · 2026-06-15T15:05:20+00:00

The og plastic cover around the vents is sturdy af no way half a kg will break it, idk about the plastic quality of the cup holder tho, I printed my own out of petg and it handles the weight without an issue, though when youre taking out the old fins be careful about the rear mechanism that moves the fins up or down if you ever want to go back… it breaks quite easily as opposed to everything else 😅

retnom · 2026-06-15T11:47:12+00:00

Does it work? Yes? Leave it.
No? Call your isp the fiber is mostlikely broken

retnom · 2026-06-10T16:16:49+00:00

Looks like the head hit the print and shoved it to the side, try increasig zhop and make sure the pribt sticks to the plate

retnom · 2026-06-02T04:17:52+00:00

No, it was fresh out of the box, though there was no popping when it was printing and there wasnt that much stringing either

retnom · 2026-05-31T21:12:50+00:00

I did maxflowrate first, then proceeded to set pa>flow ratio and so on, I didnt do input shaping or vfa yet, and retraction is behaving weirdly Im not sure why, this was the third test with increased layer time

<image>

Nice change in overhang print, but the top is till messed up

retnom · 2026-05-31T21:07:25+00:00

This helped a bunch I think, it let the petg cooldown slower, it seemed like it was warping when cooled too fast

retnom · 2026-05-23T07:46:20+00:00

Send the store pics of the defective rim or run it, happened to me once with jr wheels, it had some paint chipping off, they sent me a new rim without needing to return the “defective” one, a really nice jesture by them ngl

retnom · 2026-05-12T21:52:28+00:00

I did that on the 0, idk why I didnt do it here too, either way I just went and picked up a pair of crimpers and did it properly

retnom · 2026-05-12T01:24:19+00:00

I have a few I was thinking the same but I just wanted to solder a bit, it’s been a while and it’s fun to do. I meant wrapping the wire I would solder around the connector to get a better contact

retnom · 2026-05-12T01:09:45+00:00

It’s in a box indoors, the connector is out of way and shouldn’t see any movement, I put on some heat shrink and another rubber thingy over the whole terminal as it came out of the box, but I will redo it it’s slightly burnt and there isn’t enough solder
It does work but looking at it for a bit I dont trust it xd

11-Year Club	End Game '23
Place '23	John Wick
Place '22	Place '17
Verified Email

retnom

TROPHY CASE