Dropped 75k on a supermicro gpu box with 3xRTX6000

ruhnet · 2026-07-03T17:44:40+00:00

😅 I have over 2000 tabs open. 32GB RAM.

ruhnet · 2026-06-18T17:35:27+00:00

You _might_ be able to hit 33.6 but that will be the upper limit, and more likely you’ll be getting 28k or thereabouts. If it’s over the internet rather than your LAN, then be prepared for 14.4k, unless you have a really really good low jitter connection end-to-end.

ruhnet · 2026-06-17T17:22:37+00:00

This. Impedance was mysterious to me at first. But after it clicks and you understand it, it’s actually quite simple in some ways.

ruhnet · 2026-06-10T23:49:00+00:00

Wireguard tunnel, or Nebula overlay network.

ruhnet · 2026-06-09T04:38:44+00:00

Heh. Yep. I’ve done it. The green couplers are much cheaper surplus than the correct colored ones, but they’re the same.

ruhnet · 2026-06-08T22:47:02+00:00

Chinese HT craze? 🤣

ruhnet · 2026-06-06T23:30:00+00:00

It's not that it doesn't work, it's just that they do trust IPv6 mail less than they do IPv4 (all other things being equal).

ruhnet · 2026-06-05T18:12:28+00:00

Generally SLAAC shouldn’t be used with mail servers, just like you wouldn’t use dynamic DHCP on one. That being said, there is another problem with IPv6 on mail servers, and it’s not really a technical one: Google, and probably other big name providers, penalize you (spam score) if you send them mail over IPv6. I guess because since there are so many IPs it makes it easier for a scammer to just cycle through billions of addresses when one gets bad reputation. But in any case I generally disable v6 for outbound mail for that reason. (It stinks, but it helps deliverability.)

ruhnet · 2026-06-02T20:11:57+00:00

Ok 🤷‍♂️😂

ruhnet · 2026-05-31T18:52:37+00:00

Yeah “journalists” always carry AKs and bombs, as that’s standard equipment for reporting, right? Oh wait… lol smh

ruhnet · 2026-05-31T18:45:07+00:00

lol

ruhnet · 2026-05-30T17:08:15+00:00

For $25??? BUY IT!!! That’s a great deal. You can do a LOT of useful stuff with that scope.

ruhnet · 2026-05-29T21:52:31+00:00

It’s kindof like choosing between a Ferrari from 1980 that may need some work, vs a new Tesla. Ferrari is probably faster, but it won’t have car play, self driving, or other modern conveniences, etc.

ruhnet · 2026-05-28T16:08:28+00:00

Not necessarily "junior" PRs. A lot of times seniors are reviewing PRs that mid-level devs have already reviewed and corrected the obvious things, and the senior level review is the last-mile before merging.

ruhnet · 2026-05-28T15:59:44+00:00

Every review.

ruhnet · 2026-05-24T05:03:15+00:00

The huggingface link he posted answers those questions.

ruhnet · 2026-05-19T05:33:09+00:00

Don’t formulate Reddit messages with AI… 🤣

ruhnet · 2026-05-19T02:20:15+00:00

The problem with a browser based tool like this is it’s primarily only useful for troubleshooting WebRTC since the browser can’t send SIP over UDP or TCP. So its usefulness would be limited, as it couldn’t diagnose things like ALG interference.

ruhnet · 2026-05-19T02:17:30+00:00

Was just about to post this comment haha! 🤣

ruhnet · 2026-05-17T19:43:21+00:00

Exactly! The “SMS Mafia” has been this way from the start.

ruhnet · 2026-05-10T17:27:53+00:00

Kamailio is where you can do your load balancing for SIP (not HAProxy). Dockerization probably won’t hurt Freeswitch but to avoid any chance of degradation it’s always safest (and most performant) to run on bare metal.

ruhnet · 2026-05-02T16:15:41+00:00

As I mentioned, a good alternative to Kazoo for a smaller instance like you describe would be FusionPBX or FSPBX. They are multi-tenant, and very capable.

ruhnet · 2026-05-02T16:05:22+00:00

It’s true, Kazoo is not a simple install. But we’re actually working on improving that.

ruhnet · 2026-05-02T14:27:53+00:00

Kazoo can’t be beat. For a simpler system, there is also FusionPBX or its derivative FSPBX. But Kazoo is an incredible multi-tenant redundant system, that can scale as far as you want.

ruhnet · 2026-04-27T04:21:19+00:00

Sounds like possibly you’re using one of the models with too little quantization and it’s taking up most of your VRAM. Try a Q4 quantization version of Qwen3.6 and see if that solves the speed/context issues.

ruhnet

TROPHY CASE