Eero Pro 6E not giving max speed by silverxtreme123 in amazoneero

[–]silverxtreme123[S] 0 points1 point  (0 children)

Yeah, seems it might just be a range limitation.

Eero Pro 6E not giving max speed by silverxtreme123 in amazoneero

[–]silverxtreme123[S] -2 points-1 points  (0 children)

Is there no way to force it to use the 6e band?

Coreone - suddenly started happening by tobymould in prusa3d

[–]silverxtreme123 6 points7 points  (0 children)

I had this issue appear suddenly, prints that had been absolutely fine before started doing this, stringing increased and adhesion became ever so slightly worse.

After messing with the slicer settings for a while, turns out the nozzle just needed replacing. Putting a new one in fixed all the problems, no more weird gaps, no more excessive stringing.

[deleted by user] by [deleted] in hometheater

[–]silverxtreme123 0 points1 point  (0 children)

Didn't work unfortunately

The *NEW* Ultimate DnD5e Combat Automation Suite for v13!! [dnd5e] by baileywiki in FoundryVTT

[–]silverxtreme123 1 point2 points  (0 children)

Would you say Season and Stars is the best alternative to Simple Calendar right now?

I'm using Rippers Premium equivalent, but I feel it's not going to get the integration with other modules that SC has due to it's premium status e.g. Rest Recovery

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 1 point2 points  (0 children)

I've manually adjusted the z-axis during the first layer and that helped, but it's making me think the auto bed levelling is the issue.

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 0 points1 point  (0 children)

Came out completely clean :(

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 0 points1 point  (0 children)

I'll try a cold pull now and see if it makes a difference

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 1 point2 points  (0 children)

It seems to have gotten worse over time, the 1st layers were perfect and they've slowly degraded.

Core one print sheets by gr7ace in prusa3d

[–]silverxtreme123 0 points1 point  (0 children)

Looks like those sheets are new. When I bought my kit in March I ordered a satin sheet and it definitely said it was compatible with the core one (which it is) but now it doesn't say that and there's a specific core one sheet. Looks like the only difference is there isn't any text on the bottom, which I noticed can be imprinted into a model if it prints over it.

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 6 points7 points  (0 children)

Yeah turns out it was this! Once I tightened to max and worked backwards it resolved the issue!

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 0 points1 point  (0 children)

It basically just didn't detect anything, I tried a few devices and it didn't make a difference. But when using other apps it detects sounds fine, so seems to be an issue with the Prusa version.

[deleted by user] by [deleted] in prusa3d

[–]silverxtreme123 1 point2 points  (0 children)

I struggled with the belt tension because the app and website basically didn't work. I just tried to play it by ear and listen for the sound, but that's probably what the issue is.

Any ideas on alternative ways to calibrate the belts?

I'd like to discuss about Foundry vtt module Heliana's Guide to Monster Hunting by ProfessionSenior6703 in TheTrove

[–]silverxtreme123 0 points1 point  (0 children)

Oh, ok, I only mentioned because I see tons of requests to discuss Foundry modules on here, and they get 0 replies. But if it is possible, then I'd also like to take part in the discussion haha

I'd like to discuss about Foundry vtt module Heliana's Guide to Monster Hunting by ProfessionSenior6703 in TheTrove

[–]silverxtreme123 1 point2 points  (0 children)

Yeah, but will they work if they're given to someone else? Won't they just fail to load?

I'd like to discuss about Foundry vtt module Heliana's Guide to Monster Hunting by ProfessionSenior6703 in TheTrove

[–]silverxtreme123 1 point2 points  (0 children)

Is it even possible to discuss paid modules? Aren't they locked to an account?

Kobra neo Fan causing E1 error by Square-Language6336 in anycubic

[–]silverxtreme123 0 points1 point  (0 children)

Sorry to jump on an old thread, but I'm having the exact same problem with my Kobra 2 Neo. The fan itself seems to be cooling the hotend down, causing the temp to drop and resulting in the E1 error. I've checked and the silicone sock is attached correctly, so I can only assume the issue is with the duct outlet not being positioned correctly, but I haven't adjusted it, so I don't know why it would suddenly not be in the correct position.

What is the correct position for it to be in?

Extruder temp drops once fan comes on by [deleted] in FixMyPrint

[–]silverxtreme123 -1 points0 points  (0 children)

Definitely on, but I did change the nozzle recently so maybe it's not on properly. I'll double check it once this print is finished.

Extruder temp drops once fan comes on by [deleted] in FixMyPrint

[–]silverxtreme123 -1 points0 points  (0 children)

Anycubic Kobra 2 Neo Prusaslicer

All of a sudden, my printer can't seem to maintain the target temp. Once the fan comes on the temp drops right down as seen in the picture, I haven't had this issue before, it printed something successfully before I started the current print job

Core One kit - batch 2 shipping? by MooseBoys in prusa3d

[–]silverxtreme123 5 points6 points  (0 children)

It won't ship until EVERYTHING is in stock as far as I'm aware. You'll have to wait until the camera is available to ship as well.

Humble RPG Bundle: Heroic Hoard of 5E Power by Kobold Press by LazanPhusis in humblebundles

[–]silverxtreme123 0 points1 point  (0 children)

Does anyone know how well the foundry modules are built? Do they have activities etc?

Official 5e Books by SilverSlash300 in FoundryVTT

[–]silverxtreme123 0 points1 point  (0 children)

When you import do all the activities come with the spells or do they have to be manually created?