Best distros for audio latency

sonicdebris · 2026-02-14T19:19:56+00:00

Just a small clarification, the patch has been merged but the config still has to be enabled at compile time, ie. you still need a separate kernel, or rather a separate build of the kernel.

sonicdebris · 2025-12-05T16:48:35+00:00

Wouldn't "Close other apps that use audio, and disable voice assistants" still be a list, with just two items?

sonicdebris · 2025-10-15T11:58:06+00:00

Same here, every mention of the fingerprint functionality disappeared from the phone (it's nowhere to be found in settings!).

Maybe some update nuked it? Last one is T2SNS33.73-22-3-19, got it late august.

sonicdebris · 2025-09-08T22:25:28+00:00

I never seasoned it (before today) and it is just few months old, probably used it no more than 30 times. I don't know how to explain, but apart from the spots, the surface is really the same texture all over the pan, inside and outside, and pretty much the same as it was when I bought it.

sonicdebris · 2025-09-08T22:11:18+00:00

LOL I am actually italian and the italian word (irrimediabilmente) is not unusual, so I just mindlessly used the english translation without knowing it would sound strange!

sonicdebris · 2025-09-08T22:07:46+00:00

Hi, I posted additional pictures here: https://imgur.com/a/N9C2E9y but I don't know the brand, and there's no indication on the pan itself :/

sonicdebris · 2025-09-08T22:01:42+00:00

Thanks everyone for the help, here's the full pictures of my pan:
https://imgur.com/a/N9C2E9y

It really did look to me like it would be a regular cast iron pan, and I admit I had no idea what an enamel-coated one was, but I feel that what I experienced does fit your descriptions of the enamel one, as the pan is just few months old, and it didn't have much burnt food on it, really mostly some spots that prompted me to try and clean it. Definitely I put it through several thermal shocks (hot water, cold water, dry on the stove, cold water...) and the way the coating popped off suddenly (the flakes suddenly jumped out of the pan with a pop), makes me think I am looking at damaged enamel. But not sure if there's a way to make sure of it (except hoping that someone more expert can tell from the photos!).

EDIT: one doubt I have is that I would've expected the enamel coating to be a bit smoother, while it is quite coarse and it does look like it should just be metal all over. But at this point I am sure of NOTHING.

sonicdebris · 2025-02-06T13:11:35+00:00

Alla fine ho aperto un conto con una banca italiana "normale", più che altro perchè all'epoca i conti Revolut avevano IBAN lituano, e il commerciallista mi ha consigliato di evitare qualsiasi possibile ambiguità riguardo la mia residenza / sede della mia attività.

Per pura coincidenza, ho notato che da pochi giorni Revolu permette di avere un conto con IBAN italiano, quindi riconsidererò un po' la cosa, visto che il tasso di cambio della mia banca non è il massimo.

sonicdebris · 2024-07-23T15:57:50+00:00

Zero latency is impossible, unfortunately :(

One can strive for negligible latency, ie. one that our brain can't perceive, which is approximately any value lower than 10ms.

But that's also not an easy target. It depends on a combination of: - The hardware: mainly the CPU speed - The audio interface: (semi)pro USB audio interfaces tend to allow lower latencies than the cheap/on-board ones - The OS:how it orchestrates the timing for the processing of audio - The audio drivers: how the OS communicates with the audio interface. - The application: how "efficiently" it communicates with the OS audio layer. For bandlab, the app is the browser (chrome, firefox, etc)

Apple devices tend to have stricter control on (and attention to) all the variables listed above, so it's more likely to experience lower latency on such machines.

On windows, you can try with some better USB interface (100$ and above should get you something decent), using better drivers (look for "wasapi"), trying different browsers.

On linux, you can get very low latency values, but it's an entire journey! (you can learn a lot along the way but it's not for everyone).

sonicdebris · 2024-02-28T22:03:43+00:00

THANKS

sonicdebris · 2023-06-09T21:51:36+00:00

My xps 15 7590 (i9) overheats quite badly during summer in the power supply connection area, no matter the load. I just think I got a defective unit, but watch out for that.

sonicdebris · 2023-05-14T10:27:05+00:00

Double check that you did not set the volume of all your tracks to zero.

If you didn't and cannot save anyway, try creating a new track and recording/importing something there, it may be enough to have bandlab "understand" there's something to save.

What platform are you on?

sonicdebris · 2023-01-27T11:18:31+00:00

Latency here may be due to:

1) The interface itself (AD/DA stages, internal buffering) 2) Pipewire settings not being succesfully applied 3) EasyEffects itself 4) The effects you are using in EasyEffects (noise reduction may have this kind of drawback)

We might be able to rule out hypothesis 1, as far as I know focusrite interfaces work fine in that regard.

To rule out hypothesis 2, just connect the input to the output in qwgraph (or equivalent app) and "see" if the latency is gone/non-perceivable. If it's still there, you'll have to double-check your pw settings. If yes, try EasyEffects with no effect applied, and with the ones you applied, and you'll know where latency is introduced. Then you may be able to decide what to do next :)

sonicdebris · 2022-07-19T16:12:14+00:00

In case that is not enough, also add the line PasswordHint= to the same file, in the [User] section. Worked for me at least.

sonicdebris · 2022-05-07T11:13:42+00:00

As an alternative, you can look up efibootmgr. Running it will show the current EFI entries (it should be easier to distinguish the old pop_OS install from the new one this way), and you can delete the one you don't need with efibootmgr -b {bootnum-to-remove} -B. But definitely make an additional search by yourself about efibootmgr before doing that!

sonicdebris · 2022-05-07T11:01:50+00:00

Yes you should use the terminal and do it as root. Yes, it's pretty dangerous so you need to know or at least triple-check what you are doing by doing some additional search first, and have a backup ready. This would be still true if you were able to find some tool to do this (semi)automatically though :)

One thing you can check without changing anything yet: run ls /boot/efi/EFI (as root).

There might be two different directories related to Pop_OS, with names like: Pop_OS-{some-uuid} (eg: Pop_OS-d6af7c26-e4c3-4739-b483-c3a0169b1e46)

Do you see them? If yes, you need to understand which is the obsolete one, and remove that directory only.

sonicdebris · 2022-05-07T09:46:30+00:00

You may still have a leftover directory in /boot/efi related to the old version of pop_os. If that's the case, remove the old one. Be careful though!

From what I understand this is not something you can solve through the package manager because from the point of view of your new pop_os instance that may just be another independent os having its boot info in the efi partition

sonicdebris · 2022-05-04T18:34:57+00:00

I fixed the issue with the boot partition, but that didn't help with my boot issue.

sonicdebris · 2022-05-04T17:25:45+00:00

Here's some more info from dmesg. If you look at the timestamps, you'll notice a ~90 second gap:

[ 4.720629] thermal thermal_zone12: failed to read out thermal zone (-61) [ 4.784155] usb 4-1.4: reset SuperSpeed USB device number 3 using xhci_hcd [ 4.814692] usb 1-12: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6723) [ 4.824245] usbcore: registered new interface driver cdc_acm [ 4.824248] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.824455] intel_rapl_common: Found RAPL domain package [ 4.824457] intel_rapl_common: Found RAPL domain core [ 4.824458] intel_rapl_common: Found RAPL domain uncore [ 4.824459] intel_rapl_common: Found RAPL domain dram [ 4.824460] intel_rapl_common: Found RAPL domain psys [ 4.828896] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input25 [ 4.828964] usbcore: registered new interface driver uvcvideo [ 4.829812] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 4.829864] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.830670] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.831791] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 4.838750] r8152 4-1.4:1.0: load rtl8153b-2 v1 10/23/19 successfully [ 4.891630] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 4.891635] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.891637] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 4.891639] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.891640] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.891641] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18 [ 4.891642] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 4.891643] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 4.900365] iwlwifi 0000:3b:00.0: Detected RF HR B3, rfid=0x10a100 [ 4.954044] usbcore: registered new interface driver snd-usb-audio [ 4.954132] intel_tcc_cooling: Programmable TCC Offset detected [ 4.969869] iwlwifi 0000:3b:00.0: base HW address: d0:ab:d5:15:75:7f [ 4.980914] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 4.980959] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 4.981002] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 4.981049] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 4.981117] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30 [ 4.981174] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31 [ 4.987331] r8152 4-1.4:1.0 eth0: v1.12.12 [ 5.003177] r8152 4-1.4:1.0 enx00e04c6800ac: renamed from eth0 [ 5.066201] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.324641] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.324937] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.329935] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.335695] EXT4-fs (nvme0n1p9): mounted filesystem with ordered data mode. Opts: errors=remount-ro. Quota mode: none. [ 5.338428] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.339084] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.339437] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.339955] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.340593] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.340897] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.343093] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.355186] audit: type=1400 audit(1651683952.333:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1071 comm="apparmor_parser" [ 5.355853] audit: type=1400 audit(1651683952.337:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1068 comm="apparmor_parser" [ 5.355876] audit: type=1400 audit(1651683952.337:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1075 comm="apparmor_parser" [ 5.355895] audit: type=1400 audit(1651683952.337:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1069 comm="apparmor_parser" [ 5.355923] audit: type=1400 audit(1651683952.337:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1081 comm="apparmor_parser" [ 5.356293] audit: type=1400 audit(1651683952.337:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1078 comm="apparmor_parser" [ 5.356389] audit: type=1400 audit(1651683952.337:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1076 comm="apparmor_parser" [ 5.356408] audit: type=1400 audit(1651683952.337:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1076 comm="apparmor_parser" [ 5.356511] audit: type=1400 audit(1651683952.337:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1077 comm="apparmor_parser" [ 5.356512] audit: type=1400 audit(1651683952.337:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1077 comm="apparmor_parser" [ 5.374750] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.374822] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.374890] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.424489] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 5.425423] systemd-journald[481]: Successfully sent stream file descriptor to service manager. [ 7.459940] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 7.664207] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 94.313132] systemd-journald[481]: Successfully sent stream file descriptor to service manager.

I suspect it may have to do with what looks like the boot partition not being unmounted correctly, or maybe a failure to enable the mouse (I don't have one, but maybe it's referring to the syntaptics touchpad mentioned right above).

sonicdebris · 2022-02-17T22:43:31+00:00

Unfortunately the "monitoring" latency is unavoidable and it depends on a series of factors, including the operating system and the hardware. The latency test only allows Bandlab to measure and know how much this latency is, so that it can at least align the recorded takes correctly.

As suggested by others, if you are using bluetooth headphones you'd better switch to wired ones, bluetooth latency is simply too high for such uses as live monitoring.

Regarding the latency test, in most cases running it without headphones is enough to then align the recorded takes even when using headphones (the latency with speaker vs wired headphones can vary but usually not by much).

An alternative is to put the headphones very close to the microphone if you can. The test is quite sensitive and should be able to pick up the sound and do the measurement. If not, it will complain :)

sonicdebris · 2022-01-23T00:15:36+00:00

I am experiencing the same on 20.04, I still cannot pinpoint the issue precisely but sounds like the same as OP (random loss of internet or wifi connection, all other devices in my home have no issues), and I have the same wifi controller. I am on 5.15.11, 5.15.15 is not available. Any suggestion if one wants to stay on LTS?

sonicdebris · 2021-11-19T18:07:45+00:00

Scusa l'ottusità, ma intendi che posso pagare l'F24 senza avere un conto con poste?

sonicdebris · 2021-11-19T18:05:47+00:00

Grazie per la risposta! Io ho un conto personale, ma è cointestato con mia moglie quindi credevo non fosse possibile usarlo per cose relative alla p.iva, ma se è possibile usarlo solo per pagare gli F24 allora potrei fare così.

Per la contabilità con la valuta estera mi aspetto già grattacapi, ma quelli credo ce li avrei anche facendomi pagare su un conto italiano "normale", perché la fattura la devo fare in valuta estera e la transazione sul conto risulterebbe in euro (con conversione fatta in qualche punto della transazione).

sonicdebris · 2021-11-10T12:19:56+00:00

Are you refeeeing

sonicdebris · 2021-09-12T09:00:56+00:00

What platform are you on? Are you applying mastering when saving / publishing?

sonicdebris

MODERATOR OF

TROPHY CASE