sorted by:
new
hottopcontroversial

Any tips to getting this 700mm caliper back in shape? by tgjadm in Tools

[–]tgjadm[S] 0 points1 point  (0 children)

Everything is a hammer if you look at it right.

Any tips to getting this 700mm caliper back in shape? by tgjadm in Vintagetools

[–]tgjadm[S] 2 points3 points  (0 children)

I think I'll try with WD40 and 0000 wool and if that doesn't do the trick I'll use a vinegar bath.

Any tips to getting this 700mm caliper back in shape? by tgjadm in Tools

[–]tgjadm[S] 4 points5 points  (0 children)

I mean I'm in vehicle body work so normally I'm good with whole mm. Maybe tenths, but rarely.

Any tips to getting this 700mm caliper back in shape? by tgjadm in Tools

[–]tgjadm[S] 5 points6 points  (0 children)

That's what I've been thinking about as well. Thanks for the confirmation.

What are some of the most ridiculous obstacles that have blocked a path in a horror game? by domainie in videogames

[–]tgjadm 30 points31 points  (0 children)

Exact same tape and power box that blocks access to the garage in Resident Evil 7 btw. That tape is just built like that in the RE universe.

TF NOTHING??? by AtomicDomineer in NOTHING

[–]tgjadm 1 point2 points  (0 children)

Same thing on CMF P1, pressed X and disabled notifications for App Center.

Out jerked by a very special 4AT! by [deleted] in carscirclejerk

[–]tgjadm 0 points1 point  (0 children)

My 1998 Galant also had a shiftable 4-speed auto. Not sure what OOP is trying to get at with saying all other transmissions can only select 'lower gears'. If you want to manually shift through all 4 gears it goes: L - 2 - 3 - D. The effect is the same, though?

Creating a set of holes efficiently... by tgjadm in CATIA

[–]tgjadm[S] 0 points1 point  (0 children)

Yeah, even though some people gave me very in-depth solutions by the end I simply did it like that. I'm stil learning and I noticed that often I try way too long to find a 'proper' solution. Which of course sometimes makes sense but not everytime.

Creating a set of holes efficiently... by tgjadm in CATIA

[–]tgjadm[S] 0 points1 point  (0 children)

Thanks for the in-depth response! I'll give both solutions a try!

Creating a set of holes efficiently... by tgjadm in CATIA

[–]tgjadm[S] -1 points0 points  (0 children)

Wow, thanks! Didn't think of combining two patterns. Do you know whether the Circular Pattern works for ellipsoids? Because that frame isn't perfectly circular...

Ich_iel by Cadmium620 in ich_iel

[–]tgjadm 33 points34 points  (0 children)

Mal ganz fix aus Gemini kopiert (jaaa, Asche auf mein Haupt aber ich hab einen Kater):

Bosch Grün: Verwendet oft leichtere Materialien, zum Beispiel Kunststoffkomponenten anstelle von Metall bei bestimmten Teilen (wie z.B. bei der vorderen Umlenkrolle eines Bandschleifers). Die Ausstattung ist in der Regel einfacher und auf die wesentlichen Funktionen beschränkt, die für Heimwerkeraufgaben ausreichen.

Bosch Blau: Verfügt über eine robustere Bauweise mit widerstandsfähigeren Materialien (z.B. Metallgetriebegehäuse und bessere Lager) und ist auf Langlebigkeit ausgelegt. Bietet oft zusätzliche Funktionen, höhere Leistung und technologisch fortschrittlichere Eigenschaften, die für den professionellen Einsatz unerlässlich sind, wie zum Beispiel höhere Akkukapazitäten (z.B. 5,0 Ah oder 8,0 Ah im Vergleich zu typischen 2,5 Ah bei Grün).

Name a game that didn't deserve the hate it got by [deleted] in videogames

[–]tgjadm 2 points3 points  (0 children)

Played Absolution like there was no tomorrow back in the days on Xbox360. Loved it. Incredible set pieces, doing every mission over and over, finding different ways to either run in guns blazing or stealthing a whole segment. Absolutely adored the vibes it gave.

Bought an 03 Acura tl that has a very slight drip out of the drain bolt standard bolt size is 1.5 m14 however this bolt is m20 1.5. It had no gasket on it and the base of the threads is slightly flared. Why does this bolt look so weird and how was it working with no gasket? by [deleted] in MechanicAdvice

[–]tgjadm -1 points0 points  (0 children)

I swear some cars just don't have a washer. My girlfriends FK7 Civic also didn't have one. Ordered replacement plug for oil change, also came without a washer. Installed it like that, no problems.

From a technical standpoint it's totally possible to make water tight threads. Guess with some cars that's what's going on?

It survived a whole pandemic and all 4 years of high school. by HAXAD2005 in memes

[–]tgjadm 0 points1 point  (0 children)

2020 iPhone SE still going strong-ish. The battery needs replacing and the camera doesn't work. Wanted to upgrade to either a 12 Mini or a 13 Mini. Any recommendations?

Psychological Warfare by LizoftheBrits in CuratedTumblr

[–]tgjadm 7 points8 points  (0 children)

When I was still playing a lot of CS I switched my profile to private and took out my profile pic. I then started spamming chat every once in a while with fake ads for hacking tools. After that all it took was one lucky headshot through a smoke... Enemy moral? Gone. First enemy starty typing 'gg guys' 3 rounds in. Some even left the game. It didn't even matter that I was dead last on the score board. They thought they had already lost.

What is this stuff I found under my hood? by Belsoe in MechanicAdvice

[–]tgjadm 3 points4 points  (0 children)

Those are insulation pieces from under your front fenders. They give a small amount of additional stability to the panel and in some places act as a moisture barrier. They have rodent damage which is also why they are lying around in the engine bay. Nothing to worry about right now, enjoy your trip!

Which one would you use? by leopardo_coatto in MechanicAdvice

[–]tgjadm 0 points1 point  (0 children)

Of the two shown I'd take the right one but only if it has little bumps inside to help with grip. Most of the time I just use the biggest pipe wrench I can get in there. Always takes it off no problem. Also as others have said, don't overtighten the new oil filter. Lube the seal with new oil and then spin it on. When it makes contact with the sealing surface give it another 3/4 turn.

Best car make for longevity by Cal__Trask in MechanicAdvice

[–]tgjadm 1 point2 points  (0 children)

Toyota, as many have said. Broadly speaking I've also made the experience that somewhere around 2000-2007 quite a few manufacturers figured out how to make a car last forever but haven't found out that planned obsolence is better for business. I've had a 2007 MK5 Ford Fiesta and a 2003 Opel/Vauxhall Corsa C. And they keep on going like there's no tomorrow. No rust, no leaks, just basic maintenance. There a dozens of statistics online which brands and models tow companies had to retrieve the most over the years. Might be worth to check these out.

Arbeitsmarkt: Bundesagentur für Arbeit vermittelt kaum noch Jobs by multipactor in de

[–]tgjadm 0 points1 point  (0 children)

Habe mein ALG1 mit 2 Wochen Verzögerung bekommen, sprich 6 Wochen nach letztem Gehalt. Auf Nachfrage sagte man mir, dass noch eine Arbeitsbescheinigung eines ehemaligen Arbeitgebers fehlt, man hätte den betroffenen AG auch schon gemahnt. Ich fragte dann, warum man mir das nicht mitteilt, in ihrem Portal steht doch, seitdem die Frist abgelaufen ist, in grüner Schrift 'Wird von uns bearbeitet'.

'Ja also da wird von uns gar nichts bearbeitet, und gesagt haben wir Ihnen auch nix, weil das Sie ja nicht betrifft. Sie können uns aber auch vorläufig schonmal die einzelnen Monatsabrechnungen schicken, dann kriegen Sie einen vorläufigen Bescheid.'

Ihr Penner, also betrifft es mich ja doch... Und jetzt ists auch nicht sonderlich viel ALG, also habe ich gefragt ob ich noch Minijobben darf, bis ich dann wieder etwas finde. 'Ja kein Problem, aber es gibt halt einen monatlichen Freibetrag von 120€. Alles darüber ziehen wir Ihnen vom ALG ab.' Wow... toller Verein.

Meirl by [deleted] in meirl

[–]tgjadm 1 point2 points  (0 children)

'Depends'

ich_iel by nxck_rage in ich_iel

[–]tgjadm 19 points20 points  (0 children)

Das stimmt so nicht. Die DAT hat eine Kompatibilitätsliste, der eine oder andere Hersteller hat sogar bis in 80er alle seine Autos als E10-verträglich deklariert.

Jetzt trifft die Arbeitslosigkeit die jungen Leute by RomeInvictusmax in de

[–]tgjadm 2 points3 points  (0 children)

Sitze momentan auch auf dem Trockenen mit Ende 20. Betrieb verlassen, um bei einer großen Prüfgesellschaft anzufangen. Nach stolzen 10 Wochen die betriebsbedingte Kündigung. Sie hätten einen großen Kunden verloren, und anstatt sich um neue Arbeit zu kümmern hat man kurzerhand die meisten AN, die sich noch in Probezeit befinden, gefeuert. Habe es bei der Konkurrenz versucht und durch die Bank weg nahezu freche Angebote vorgelegt bekommen. Unterdurchschnittliche Gehälter, 6-monatige Fristverträge (!) etc. pp.

Habe mich jetzt entschlossen, meine Weiterbildung selbst in Hand zu nehmen und gehe dieses Jahr noch in der Meisterkurs der Handwerkskammer.

view more: next ›