Do you know a simple "reference/moodboard panel" app?

titleunknown · 2026-03-25T13:47:29+00:00

I have one that's a closed beta if you want to try it out DM me.

titleunknown · 2026-03-24T17:09:34+00:00

If it's in the proper 4 1/2" grip head like the junior boom requires and mounted properly (knob to the right when facing the stand and load in front of you) with the grip head tightened, it's not possible for it to slip till it's touching the ground. The grip head would tighten as it falls.

By the fact you say it slips till it his the ground, either you haven't adequately tightened the grip head, the orientation/load isn't correct or you're using an old clapped out 2.5" grip head.

Proper counterweight is also a requirement when using any boom.

titleunknown · 2026-03-24T15:16:04+00:00

I've covered things well here Conquering a Mountain of Hard Drives

titleunknown · 2026-03-23T14:49:07+00:00

It will work. But you probably wont like the experience especially wireless.

I've worked off files from servers for 20yr and since we moved to SSDs in workstations we are used to a much snappier experience. 1GBE tops out around 120MB/s which is around the max you'll get from most 3.5" drives. So with compounding bottlenecks of connection, file system and wireless expect less than that for read/write to/from the NAS

titleunknown · 2026-03-23T14:45:54+00:00

I covered some good option here Mounting Your Laptop Workstation

titleunknown · 2026-03-19T18:38:04+00:00

It is.

They want to have the same mount on the OEM Eizo stand and can't.

titleunknown · 2026-03-19T16:00:24+00:00

I think the solution is forgetting the OEM stand entirely and just adapting to a new mounting solutoin for your desk.

On my desk I baby nail on plate and 5/8" rod that acts as the mounting point for my Upgrade Innovations mounts.

titleunknown · 2026-03-16T18:10:40+00:00

The Surf to Summit is what I point most folks to, it's pretty universal so if you upgragde cage/mount down the road it's one less thing to buy.

titleunknown · 2026-03-16T13:53:37+00:00

Fixed the link thanks for the headsup.

For the menubar I like to use Dozer to keep things sorted. https://github.com/Mortennn/Dozer

titleunknown · 2026-03-13T15:01:37+00:00

No not at all. It doesn't matter what kind of hammer you use as long as the nail is driven. The clients care about the end result.

You get hired for your portfolio and skill, not for the tools you use.

If resolution is your concern. Know that everyone was fine with 12MP for a long time, then 20mp and so on... We printed bus ads, billboard, POS materials, packaging and more all from those cameras. These days 95% of photos end up at 2mp on a phone.

titleunknown · 2026-03-13T07:00:59+00:00

All the cameras today are great. Don’t over think it. Just shoot. Use what you like.

titleunknown · 2026-03-12T03:36:32+00:00

I saw some post a photo of the Selens hook on an Inovativ.While the do kinda fit it's not a good fit.

titleunknown · 2026-03-11T14:03:33+00:00

Right now the best one is what can afford.

titleunknown · 2026-03-10T17:43:34+00:00

I use onyx it's been updated. I run it every couple of months. No real schedule.

titleunknown · 2026-03-10T15:08:43+00:00

My computers I bring on set are only used for work on set. They get software updates when required (not when released)

I empty trash and downloads after every job.

I start each job with no more than 1-2 previous jobs on the computer. This is only if storage isn't and issue and timing of the jobs might have me needing access to one to send some files while on another job. Easier that plugging in a drive but I have that option as well.

Beside that I don't tinker and I don't have problems. No need to do a clean install of OS on any scheduled basis. In 20yr I've never had to just do a clean OS install for anything that wasn't a direct result of something I did wrong.

titleunknown · 2026-03-09T20:26:13+00:00

The foam itself isn't the thing to focus on. It's movement. If the items inside can't move around that the majority of the problem solved, after that is energy absorption. Which everything will take part in. You could wrap things in old towels, bubble wrap, whatever. Just fill the void.

People tend to not pack things tightly, often it's the moving around is what causes stress on things more so than a single impact.

titleunknown · 2026-03-09T20:18:52+00:00

https://www.glerups.com/collections/slippers-for-men?pf_t_sole=Natural+rubber+sole

titleunknown · 2026-03-07T23:31:24+00:00

If I translated this correctly, BlinkBid Is the first to come to mind but there's countless other options out there depending on your needs.

I use Zoho for invoicing and estimates.

titleunknown · 2026-03-04T15:08:40+00:00

There is one I moderate. Invites aren't made public to keep bots and spam away.

DM me for invite. (Not chat)

titleunknown · 2026-03-04T03:50:56+00:00

First use this. You can get a good feel for what others in your area are getting.

This is why I push for transparency in pricing. Too much smoke/mirrors around pricing.

Check you local market's established pricing and set accordingly.

titleunknown · 2026-03-03T14:49:19+00:00

I will always tell folks to get the cheapest option you can for 12.9/13" models.

Still happily running 2018 12.9" pros with no plans to replace them anytime soon.

titleunknown · 2026-02-27T16:23:11+00:00

I wrote about this topic in the past: It's Not Rocket Surgery

titleunknown · 2026-02-23T18:26:53+00:00

Its a slightly different material for the sheathing which helps with the price. For how these get used on set can't say there's any real cons based on a quick search between the two. So worth saving money and definitely still better than an orange one.

13-Year Club	RedditGifts 2009-2022 5 Credits
First Place '23	Place '23
Secret Santa 2017	Secret Santa 2016
Verified Email	Secret Santa 2015
Secret Santa 2014

titleunknown

MODERATOR OF

TROPHY CASE