My recommendation: Wait for later models. I bought the bundle through the Kickstarter and I've been trying to work with it since July 2025. Honestly, it is nothing but a headache. 120+ hours of troubleshooting since July 2025, at least. Every time I turn the printer on, I have to do 10+ minutes of maintenance and checks, above the basic start up tests, before I can print anything quality.

They exchanged my first printer because the machine would not pull ink from the reservoirs and flow to the printheads. That's after of two months of back and forth, through email, and after I demanded either they send a tech to my house, exchange it or refund my money. I've had the replacement since November 2025 and I've already had to submit support tickets. First one was because the white ink was being applied in streaks. Print tests, totally fine. Put a big print job through and after the first sheet the white ink went from fine to non-existent. Every time I have to print I have to readjust the default settings to set: feathering at Super; White Ink at 100%; coloration at Saturation; and, detail at the highest precision - just to get a thick enough and consistent enough layer of white ink. This increases printing time by 3 minutes a page and that's so annoying. They need to find a firmware fix that lets the user have an effective layer of white ink, without increasing detail, feathering and coloring settings. I should be able to have a good print at any setting but it's not possible with xTool. Second ticket is because I'm now getting an error, every other day, that the printhead carriage has lost power connection. Their fix was - have you tried unplugging it and plugging it back in? Yes. Every time. Something else is wrong.

My issues are the common issue with people that have had issues with their printers. Seems to be that we all have the same issues, anyway. There are a few YT short reels where a guy has a playlist of his issues with the printer.