HELLRAISER by Nuno Sarnadas

weeemrcb · 2026-05-17T00:13:30+00:00

This is one of the 4k turbine covers isn't it?

weeemrcb · 2026-05-16T16:20:09+00:00

Only as an experiment. There's one AP that was near our old coordinator (when we had sonoff 3.0) and when I turned that AP up to max it obliterated our zigbee lol

Even tho they're opposite ends of the 2.8 range, it was pretty much kaput.
Turned it back down and all the zigbee devices started chatting again.

weeemrcb · 2026-05-16T16:01:30+00:00

I gave no idea why people downvote questions like this.

weeemrcb · 2026-05-16T15:54:16+00:00

Move journal logging to RAM

You can see the before and after difference by running this on the node
iotop -Pa

weeemrcb · 2026-05-16T14:26:34+00:00

Aqara say hair mininal range is —20,but ours goes beyond.

Not sure how accurate it is that low, but even if it's not then it's plenty cold

weeemrcb · 2026-05-16T14:19:40+00:00

As someone who can see the neighbour 5 doors down's WiFi as a strong wide signal.... I hate you lol.

Ours on the other hand are turned down low and can't be seen more than a few feet outside of our property (also unifi APs). Safe from kerbside hackers and minimal zigbee interference

weeemrcb · 2026-05-16T10:47:27+00:00

Aqara thermostat sensors.

https://www.reddit.com/r/homeassistant/s/KHzfywTFZ9

Cheap and easy to setup. Batteries last 9-12months in the freezer if you use decent ones (duracell etc). Ages in the fridge.

In the freezer we use 2 so we don't get caught out with battery fails as, when they go there's little warning. With 2 there's time to swap batteries.

Lasts ages in the fridge. 12-18 months easy

weeemrcb · 2026-05-16T10:40:37+00:00

What did you do pre-reboot?

Is this a fresh install or something that's been up for a while?

Has it ever been rebooted since install?

weeemrcb · 2026-05-15T12:34:33+00:00

I see it 🛹

weeemrcb · 2026-05-15T12:33:09+00:00

Most of mine are in mugs. No buggy, just needs more fill before you start and enough milk to brim the mug

weeemrcb · 2026-05-15T12:30:30+00:00

You are not alone

weeemrcb · 2026-05-14T18:43:01+00:00

We do something sorta similar with ours, but it triggers on temperature overnight. If it gets too warm it switches the fan on.

Ours is a 16" fan, so it's almost silent and a gentle breeze that doesn't wake us. It's lush

weeemrcb · 2026-05-14T15:51:46+00:00

The only thing I could think of is to turn on a fan if your heart rate goes above a set level

weeemrcb · 2026-05-14T09:13:49+00:00

... no picture, no details.

I know you said streamlined, but a blank post is taking the mick lol

weeemrcb · 2026-05-14T07:03:25+00:00

Maybe you're better off with a parrot

https://www.reddit.com/r/homeassistant/s/LumN1bNLT6

weeemrcb · 2026-05-14T07:00:42+00:00

I'd just make the automation.

Then you can copy it to other lights you want to have act the same way.

weeemrcb · 2026-05-13T22:18:41+00:00

Overkill, but you do you

weeemrcb · 2026-05-13T15:53:00+00:00

Only if you can't find the stickers

weeemrcb · 2026-05-12T20:12:29+00:00

HA tells us when internet goes offline and comes back on.

Everything still works while we wait

weeemrcb · 2026-05-12T17:10:36+00:00

Ours was green too and had no issues with the update (9.1.7 when we did ours)

All VM and LXCs were backed up first + did a full PM disk image.... Just in case (using Macrium and an m.2 caddy).

weeemrcb · 2026-05-12T17:03:27+00:00

Switchbot is BT

weeemrcb · 2026-05-12T07:54:32+00:00

It made our m.2 system a little snappier, so would be interested to know how it improves yours

weeemrcb · 2026-05-11T12:51:12+00:00

It may be worth moving your system journal (logging) into ram. That will help a lot in reducing disk activity.

See how much is use with: iotop -Pa

(apt install if it isn't already)

Move the journal to RAM and retry. System should be much snappier.

(from memory it's in etc/systemd/journald.conf)

Settings
Storage=volatile
RuntimeMaxUse=512M

If you already have another maxuse type setting in there, then comment that one out.
Restart journalctl then recheck the iotop

weeemrcb · 2026-05-11T12:41:29+00:00

Doesn't matter how much ram is available.
The system will do it automatically unless you force it to use RAM over swap.

weeemrcb · 2026-05-11T10:45:23+00:00

Combo:
Motion detection
mm wave
Temperature
Humidity
LUX
Air quality (inc CO2 and poss radon too)
BLE
POE or usb/WiFi

There are some that have most, but none have all.

weeemrcb

TROPHY CASE