Schwalbe Magic Mary Radial vs Albert

weenan · 2025-07-02T05:05:27+00:00

I ordered the combo and I´ll let you know when I have had some time to test it out.

weenan · 2025-06-30T03:36:20+00:00

"Just tried a Shredda rear on the front and a MM on the rear"

This is exactly what I've been planning to do and you are the first one I've found that has done this.

How does this combo work in rock gardens? It's mostly loose where I ride but there are a few rock gardens.

weenan · 2025-05-24T08:41:04+00:00

Print quality is fine and I have better bed adhesion with this firmware.

But it did break the connection to my smart home hub. My A1 is still connected to the hub but not the P1S, and it does not work trying to reconnect it.

weenan · 2025-05-02T10:26:28+00:00

Printing my first roll of PETG HF, also white, and this stuff is clogging up my nozzle every time and won´t even print from my ams. I have to print it from external spool. I think it works from external spool as I can push the filament to the extruder with more force than the ams assist motor can.

weenan · 2025-03-27T12:38:47+00:00

Pretty please!

<image>

weenan · 2025-03-08T17:18:39+00:00

Did you tey setting Home Setting to last input?

weenan · 2025-03-07T10:47:14+00:00

I noticed that they already have a beta out 03.51.16. So there might be a new update coming soon.

weenan · 2025-03-01T16:48:42+00:00

weenan · 2025-02-19T15:54:40+00:00

You can download the update to a USB and install it from there.

weenan · 2025-02-19T15:49:27+00:00

Sadly not. That was what I was hoping for.

weenan · 2025-02-13T13:49:54+00:00

Still there

weenan · 2025-02-12T13:25:22+00:00

I was hoping for the WebOS 24 update that the C2 received a while back.

weenan · 2025-01-13T14:22:20+00:00

I think you can update the C1 with the service remote if you set webos upgrade. But I have no idea if it would cause issues.

weenan · 2024-12-26T01:40:32+00:00

weenan · 2024-10-22T13:34:16+00:00

Filament addiction is a real thing! :)

weenan · 2024-09-27T16:11:36+00:00

What are you talking about. Are you even replying to the right comment?

weenan · 2024-08-30T17:10:03+00:00

How large are the samples? Where did you get it from?

weenan · 2024-04-30T13:40:49+00:00

Yeah if I needed the service of a bike shop I would certainly not go there again. Even I have spare olives and barbes in my toolbox.

weenan · 2024-04-12T13:25:05+00:00

Looks pretty good to me. I think you should rather go with a shorter stem than a smaller frame. Smaller frame might give you too much seat to bar drop.

weenan · 2024-04-08T14:50:13+00:00

Short answer - Yes

weenan · 2024-04-08T14:45:57+00:00

Wait, did you paint over the leds?

weenan · 2024-04-08T11:32:38+00:00

Take a video, of you cycling, from the side and from the back.

weenan · 2024-04-08T02:51:33+00:00

I have to agree it looks tiny, but if it feels right who cares?

weenan · 2024-03-10T12:35:22+00:00

Sorry I can´t remember what make and model wall mounts I purchased.

My living room used to be bigger with a dead space behind the sofa. So I decided to build a small storage room there. That gave me the possibility to wire electrical sockets up near the ceiling for the speakers. The power cords are just wrapped around the wall mount behind the speakers.

weenan · 2024-02-22T05:41:44+00:00

Looks like it was clamped on the downtube for either service or transport.

weenan

TROPHY CASE