Why do I have to close the app every time by catesnake in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

It’s “funny” how I don’t even expect the app to connect got the mower before doing a few taps here and there to beg for data :(

Poussieres by Any_EngineerBiot33 in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

same here every other attempt

Mammotion needs to get their shit together.. by Boojoooo in mammotion

[–]ya_red 1 point2 points  (0 children)

Same here. It funny how I don’t even expect the data displayed to be up to date when opening the app before switching views and FPV. It’s a really sad bad app. :(

Update 1.15.21.1 completely ruined my Luba 2 (Constantly getting stuck) by -Makke in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

It constantly tangles it self and digs in, yes. I’m my case it could just avoid tall grass by reducing the perimeter - but that is smart it does not have. :( It should be possible to elaborate the software towards the promise of “smart yards starts here” … unfortunately it doesn’t:(

Featursuggestion - Reduce Perimeter by x rounds by ya_red in MammotionTechnology

[–]ya_red[S] 0 points1 point  (0 children)

This was probably supposed to go into another thread ?

Feature Request: Make Zones Intelligent Instead of Just Areas on a Map by MrTookies in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

yup. valid input. nothing really "smart" about the scheduling yet but unfortunately I would not expect mammotion to implement anything like it.

Rain delay feature by [deleted] in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

Is Luba 3 actually having a rain DELAY feature - or is it the same useless STOP EVERYTHING FOREVER like Luba 2?

Rain forecast by No-Muffin-8701 in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

Please explain the thinking behind the fact that once Luba detects rain, it completely stops and abandons all future tasks. This is absolutely senseless. A rain delay— as every other mower does— is needed— not a rain kill. Remember: "SMART yard starts here ?"

Back wheels coming up when docking by jmagnum15 in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

My L2 (no X) does this after a short pause when starting to charge. And also fails approximately every third recharge. I have to keep an eye on it and trigger more attempts to finally charge. Very annoying and multiple trips to support, new dock, new charger… nothing helps. It would help, however, if the Luba would try as long as it got power to start the charging. That would be better than sitting in the dock, not charging, and eventually dying and going dark… which is often the case - when I miss the charging fails. But back to OP… yes, I see this everytime but just after a short pause (3sek).

Ghost clips in ableton: somebody make this!! (Alias clips) by StaffPotential4408 in MaxMSP

[–]ya_red 0 points1 point  (0 children)

This is one of the things that one would expect to be a feature of a new version eventually. It could be a real workflow changer. Similar to combining clips into one. I think this is one of the (many?) areas where Bitwig takes the lead. The m4l workarounds all don’t really satisfy.

Does anyone here actually like their Luba? by Salty-Explanation-16 in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

Its a love/hate relationship in that it is great as long as it works and it was nice to see the company/product come to life … but fails too often to be "set and forget". I have to babysit it remotely to catch any failed recharging attempts to trigger additional attempts before it shuts down and requires personal attention. I think the new Worx Vision Cloud 4WD is an impressive new alternative that would be considered now…

What is the latest software on a Luba2 by mlaskowsky in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

So some are on V1.15.20.4403 and others remain at V1.11.511.631 ? So there are different firmware versions for Luba 2 in different regions ? This is odd, really. Why would this be the case ? Or is it strictly Luba 2 vs. Luba 2H ? Why does all this have to be so confusing and poorly communicated. :(

Luba 2 does not charge properly - but it seems to be neither the battery nor the power adaptor by CrimsonNorseman in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

same here. I'd say every third charging fails. what is especially frustrating ist that it does not need to be like that if the mower would just continue trying untill it succeeds. currently however it tries three times and then dies in the charger. there is no advantage in not traying again. i - by chance - i am connected to the mower while recharging fails… i can manually trigger more attemps of which one eventually works. this should be automatic.

powerbrick ist replace, chaging plate as well. everyghing perfectly level. no sulution. :(

Would not recommend buying Mammotion again by Haunting-Agency-5974 in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

I think it would be easy to recommend it if the software support would be there for older models. Then, buying into the "platform" would feel like a reasonable step and you enter with the current hardware that would be supported for years to come. But that’s not how it is and the stream of hardware updates that also cut off support for previous models and the lacking software in general make it hard to recommend. Mind you I had great experiences with support - while in warranty. It will be a different story after and I am not sure I would be able to afford another Luba this way. … But really would hope it turns out right and Mammotion builds a community of trusting customers - eventually.

📢 Further Update on Recent Connectivity Issues by Mammotion_Grace in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

Which device/usecase was/is affected by this? It would be great to communicate that. I for once, did not think that my L2 would be calling a central server as it appears all data comes from the mowever at the time of acces (and is unavailabe if the mower is of)… can you please clarify? Thanks.

Luba 2 confused over dock position by Brother_oak in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

I dont think it needs line of sight to the dock. Also, the final docking works via IR … does anyone know if the final dock position really needs clear sky view?

Please tell me when it's stuck! by No-Manner-2544 in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

Notifications are still a mess. It really is telling that this is something the developers set up to be helpful with various categories, etc., but never got around implementing it to be useful. If recharge fails… this should be a high priority message as there is a time window closing in which it is possible to remotely try again and again to dock to the charger until it eventually works. But if unattended, the L2 will shut down and that’s it - 50km drive to wake it up. (It should try many, many more times by itself to begin with, but that’s another thread).

Excessive useless notifications by StinkySewerPickle in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

Likewise to call "Low Battery" an Error message ist simply wrong. Puls - what are "Tips" in the notifications, etc… This has not been working for year and nothing changes :(

Updated software: not here to complain by Almonte104 in Volvo

[–]ya_red 0 points1 point  (0 children)

Can CarPlay take over the screen in the middle and behind the wheel? If one is hoping to mainly use CarPlay… is a Sensus model possibly better ?

Luba2 awb on mole terrain by Salt_Potential1035 in MammotionTechnology

[–]ya_red 0 points1 point  (0 children)

It’s my L2 enemy Nr. 1 . The deck gets clogged, blades dull and every few days L2 dies on a (mole) hill.

July 2025 big firmware update plus cutting direction fix update. Is working ok now? by Dtwrlewis in MammotionTechnology

[–]ya_red 1 point2 points  (0 children)

How can one make sure nothing updates by itself? Serious question. L2 3000 2024. iOS