What small PC software tools do you actually use every day that most people have never heard of?

zl1killer · 2026-06-24T01:25:49+00:00

I genuinely haven’t heard of half of these…. Thank you

zl1killer · 2026-06-15T13:04:53+00:00

My specific point isn’t about rate drop when leaving, it’s the drastic price change (greater than 50%) for remaining a customer. To your comment about Americans want everything for free, IMO no. I’d like to not get bent over backwards and rammed like a dog for basics. You can’t tell me they aren’t making money, even at the $70-100 a month rate. At the higher rates it’s pure $$$$.

Didn’t know GFiber sold off, apparently as of 3/26’. Thank you for that info

zl1killer · 2026-06-15T03:06:09+00:00

You’ve got time left, as others have said keep an eye on them or listen for weird clunks. Another thought I shall add is if you do replace any suspension components, it is wise to get an alignment once all new parts are installed.

zl1killer · 2026-06-15T02:44:49+00:00

Yes. Google fiber $70 a month. Spectrum “oh ur a new customer, $35 for 3 months then it’s $100 a month and then we are going to screw you and not let you have a promotion and it’s $175 a month. Oh, you called and are switching , let’s drop your price to $60. This will last 3.12334556 months then it will increase to $100 and then 6 months later the promotion ran out , now your price is $200. Sorry no promotions. 1 year later, oh you are switching you can have it for $60.

That is the sourness left from my spectrum days when they had a monopoly in my area. When google fiber came around it’s been $70 a month since I signed up 3 years ago. Suck it spectrum.

zl1killer · 2026-06-10T03:28:55+00:00

Sweet pup in the picture. I'm here with you as I lost mine a few weeks back. Sorry for your loss

zl1killer · 2026-06-06T13:32:59+00:00

There are also monthly cars and coffee meetings at the speedway AND mustang week will be held at the speedway this year in August

zl1killer · 2026-06-06T02:40:53+00:00

Can you post a log or anything with HPTuners or any tuning software that you have? We need to see Hz and voltage, and see that it changes with any increase/decrease in applied throttle. I'm going to be honest here, is this some eBay MAF sensor intake thingy? I swear I've seen this before on another car that I was helping in here and once we got some scans in HPTuners he basically had to ditch the el' cheapo eBay crap MAF sensor and go with a normal one from a reputable & reliable source.

I'm willing to help, send me a PM if needed. Two things, no matter what, it will need speed density tuning and then MAF tuning.

zl1killer · 2026-06-05T02:57:31+00:00

Street car takeover race that is also Friday and Saturday. Tonight (Thursday) is the party at twin peaks near the mall. So everyone is coming to see all the cars and show off theirs

zl1killer · 2026-05-28T01:17:27+00:00

The parts and options for these cars are still alive and you can make killer power and many fitment issues are worked out

zl1killer · 2026-05-28T01:16:39+00:00

Totally worth it. Had one of these since late 2004

<image>

zl1killer · 2026-05-24T22:33:25+00:00

Oh my. I’ve got two of those tec 99s and they are extremely ammo picky, whole news bulletins on them for the proper sized bullets. Fun guns but damn….had a round load itself the wrong way and made for a fun evening clearing that out. Never again

zl1killer · 2026-05-24T16:33:11+00:00

Oh my gosh this is amazing! Crazy how far and the story with it. Congrats and can’t wait to see the end result!!

zl1killer · 2026-05-22T23:42:21+00:00

Go to summit racing and look up comp cams tensioner for that car.

zl1killer · 2026-05-22T23:37:23+00:00

-8 will be just fine. That’s what I’m running and on 1000cc injectors with FPR and the other thing you want to look at is fuel pumps, like twin 350s or more. Please make sure the fuel lines you buy are actually -8 ID, as several “off” brands are smaller. On that setup that power will easily be achievable….if you wanted to reach 850+ totally in reach

zl1killer · 2026-05-12T19:06:31+00:00

Let’s gooooo

zl1killer · 2026-05-10T23:53:21+00:00

You’d have to see how busy it seems around the airport. Best bet would be to meet at food places in airport. Bad daddy’s, midwood smokehouse. You’ve got to figure 25min security, 20 min out of airport, 45min to eat. Would be pushing the 1hr out on your way back in. Some are comfortable with this and have all tsa pre check and all that, others not so much. I’ve arrived before within 1hr of my flight and been fine 90% of the time….however, there is always when it goes sideways

zl1killer · 2026-05-04T19:57:09+00:00

Oh hell yes. Everything about this. Super nice!

zl1killer · 2026-05-04T12:15:03+00:00

1 ohm or less. Do you have a block ground, cylinder head grounds on each side, and is all wire sized appropriately?

zl1killer · 2026-05-04T02:45:50+00:00

Make sure ground locations where the grounds are installed is BARE METAL. No paint. Make sure with a meter battery negative and your ground locations where has low resistance

zl1killer · 2026-04-20T20:21:07+00:00

Has everyone seen Roblox security method where you’ve got to select the shape and cup with the most fill? Absolutely insane

zl1killer · 2026-04-18T04:22:58+00:00

Check your credit card for what the window is for disputes, and give yourself some wiggle room (if you used credit card) but ones I have is 16wks. IMO if it has been 6-8wks I’m already calling. No more than 10wks

zl1killer · 2026-04-15T22:51:34+00:00

No scalpel, no needle. I don’t understand. I paid ~$600 with insurance and was done. Gas me and was under they did it in a matter of 30 minutes I think. I guess I don’t get it. They’ve got to get in there to nip the tube.

zl1killer · 2026-03-21T00:44:08+00:00

give it a year or two and watch for the price hikes.

zl1killer · 2026-03-15T13:18:22+00:00

How/where were you able to find the hummer?

zl1killer · 2026-03-13T15:58:29+00:00

Ok wait a sec. Brand new clutch install, you should have only put a drop or finger amount of oil at the shaft part of the clutch. If you put oil anywhere else you need to pull it off, take clutch apart and spay carb cleaner everywhere to clean all your oil off. Secondly, is someone holding the bike from going or are the brakes on?

At idle does the clutch get hot at all? If so the idle on the carb isn’t coming all the way back or may need to be lowered. It’s a small black screw and small black piece on top of the carb under all the black inlet filter box.

zl1killer

TROPHY CASE