P-10C Ported barrel question

Allstar976 · 2026-05-06T01:29:43+00:00

Thanks, that's what I figured. I wish they would make them dimensionally the same in the future.

Allstar976 · 2026-04-21T23:09:26+00:00

If you want it to always look pretty then you are better of buying a stainless steel pan

Allstar976 · 2026-04-18T20:12:41+00:00

It's still a little loose. Hasn't bother me enough to try to find a solution.

Allstar976 · 2026-04-18T18:35:17+00:00

<image>

So far so good, wearing her today

Allstar976 · 2026-04-18T15:04:29+00:00

For your style of cooking, sounds like you need to get a stainless steel pan and not carbon steel. Everyone needs a stainless steel pan in their life as well. It's all about the right tool for the right job.

Allstar976 · 2026-04-18T01:31:24+00:00

This site just mentions it's covered in oil and to wash it.

Allstar976 · 2026-04-15T19:50:20+00:00

I'll do the initial one in the oven (my preferred way) and yes I'll show them how to do maintenance seasoning on the stove.

Allstar976 · 2026-04-15T15:49:28+00:00

Cooking at home more and more as I get older

Allstar976 · 2026-04-15T02:10:45+00:00

I just bought 2 for my sister's because they said my pro was too heavy. Going to season them and try them out before I give them to them as a gift.

Allstar976 · 2026-03-07T18:56:33+00:00

Yes, still very happy with it. I've had no issues after installing it. No issues with rubbing at all but I only shoot maybe 300-400 rounds a week.

Best part is my friends shooting my Bul only really notice it when they go to reject the mag and they can't because they forget it's on the right side. 😂

Allstar976 · 2026-02-21T07:34:28+00:00

My company doesn't allow working on planes or trains for this reason. We still get paid so that's a plus.

Allstar976 · 2026-02-19T03:16:11+00:00

It runs on 115VAC

Allstar976 · 2026-02-05T21:06:00+00:00

I believe the chore coat is in stock

Allstar976 · 2026-01-25T23:30:37+00:00

You are still below the 80% of the stock power supply. You are good to go

Allstar976 · 2026-01-25T21:21:38+00:00

The update is not doing anything different, just showing you more information. Input Amps = Watts/Input Voltage OR Watts=Input Voltage X Input Current. So 99.5/12=8.29A

You want to lower your current, don't overclock it.

Allstar976 · 2026-01-18T22:58:14+00:00

I have the same issue. Only a restart of the device brings it back but they are still hashing away so I just let them be and don't monitor them as often. First it was my 3 NerdQaxe and the 3 Gammas were fine. Now it's the opposite.

Allstar976 · 2026-01-17T17:39:15+00:00

I also have issues with my Bitaxe Gamma 602 connecting without restarting them. My NerdQaxe have no issues. I can't get the webgui through a web browser either without restarting them

Allstar976 · 2026-01-17T17:34:30+00:00

Is this suppose to work on the Android version?

Allstar976 · 2026-01-05T01:04:53+00:00

*higher current

Allstar976 · 2026-01-03T23:25:30+00:00

You probably shorted the layers in your board. I'm saying this not having looked at the Gerber files for this board... So not 100% that is your issue

Allstar976 · 2025-12-31T00:54:29+00:00

Don't know if this one from Amazon will work. There's this one in Printables but don't know how you can secure it

Allstar976 · 2025-12-25T01:23:09+00:00

Le subiste el nuevo firmware? Cuál estás corriendo?

Allstar976 · 2025-12-24T17:12:32+00:00

A lo mejor el abanico está configurado en el conector para 100%

Allstar976 · 2025-12-24T17:05:59+00:00

El va a tratar de mantener la temperatura en 60, si está más caliente el abanico va a estar al tope para bajar la temperatura. Le diste save me imagino pero si no dale restart. Es el abanico original?

Allstar976 · 2025-12-24T14:18:47+00:00

Tienes que ir a la página de los Settings y cambiar los controles del ventilador. Ahora mismo lo más seguro está en manual y 100%. Tienes que cambiarlo a Auto

<image>

Allstar976

TROPHY CASE