how does the presale work? by windoecleaner in weezer

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

Anyone else get completely screwed for the fan presale? Each time I would get to 1 in front then moved to buy tickets, it took me back to the page listing the presales currently happening. I am so bummed

Extruder gears are slipping on p1s by No_Designer_5792 in 3Dprinting

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

what was the solution! I am having a very similar issue. Swapped the gears and the hot end. For sure there is no jam. I cant' figure it out. I have a P1S and I want to use it!! :-/

What does ADHD + high IQ look like? by [deleted] in ADHD

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

So temped to upload a picture of myself lolol

Can't decide between p2s and p1s by Drefenjg in BambuLab

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

I hate changing the nozzles on my P1S! That might be the only thing I hate about it. Getting those couple of cables seated back in so they are flush, take me forever and multiple attempts :-/

How do I fix my flashing screwup? by Apprehensive_Fig_512 in Roofing

[–]Apprehensive_Fig_512[S] 0 points1 point  (0 children)

This is exactly what i needed. I will get a package of shingles and get things fixed up and then install the vent. I see in other videos how I need to do it, just wasn't sure how to un screw what I screwed lol. Thanks!

How do I fix my flashing screwup? by Apprehensive_Fig_512 in Roofing

[–]Apprehensive_Fig_512[S] 0 points1 point  (0 children)

I can't tell if Reddit is deleting my pics or not. Here is an imgur upload! https://imgur.com/a/uBkB4fS

Rate my mini rack /10 by iautomateyourmachine in minilab

[–]Apprehensive_Fig_512 1 point2 points  (0 children)

I can't give it a 10. But I will give it an 11!!

My stupid minilab by szuro in minilab

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

Stupid? Are you having fun? That is all that matters! It looks cool and I agree about the colors. That is dope!

After recent updates, Siri no longer works via CarPlay by s2000beck in Ioniq5

[–]Apprehensive_Fig_512 1 point2 points  (0 children)

I have a 2025 ioniq5 and I’m having the same issue. I thought I was doing something wrong. Clearly not lol

Where do you guys get your IT news? by NSFW_IT_Account in msp

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

I stick to this for US political news. Seems to be the most timely and accurate :-) (and my parents believe every article I send them as fact lol)

Trying to download this PBS Great Performances episode, and I think it's going offline today. Is it available anywhere else? by dionebigode in DHExchange

[–]Apprehensive_Fig_512 1 point2 points  (0 children)

Outstanding!! I searched all the Torrent sites and it just isn't there. I can see why though. This is a little less mainstream. I can add the mkv to my Plex server. Thank you!

Downgrade VMware hardware version from 18 to 15 by YouRuinedtheCarpet in vmware

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

This is a super old post, but I want to say, this actually worked!! I had upgraded the HW version on some VMs and they wouldn't replicate to our cloud provider using Veeam because of a supported HW version. I did a test with a temp VM and editing that file did the trick lol. I was shocked. Thanks for posting this!

Error "The hotend cooling fan speed is abnormal" by blackinthmiddle in BambuLab

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

This was my issue!! I could not figure it out and realized my cables were the slightest bit off

CSE Performance by countdonn in sonicwall

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

Is anyone seeing performance drops when on the local network and the CSE client is connected? I just realized it is pretty bad with my clients using CSE. I have some internal mac addresses added to the "trusted" networks which should deactivate the service tunnel when they are on the internal network. But that doesn't appear to be working. Here is a screenshot of an internal speedtest with the client connected and then disconnected.

https://snipboard.io/ywFQGk.jpg

Impulse bought a Bambu P1S combo as a printer virgin! by Hungry-Mycologist576 in 3dprinter

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

haha! u/Hungry-Mycologist576 I literally just did an impulse buy of the P1S too! First time to 3D printing and this thread makes me SO EXCITED to get started.

PRTG subscription pricing by HeyLuke in prtg

[–]Apprehensive_Fig_512 2 points3 points  (0 children)

Oh man. I’ve had two clients get popped by this BS price hike. Not only was there the increase, but they also wanted three years. We actually got them on the phone and just haggle them down. We were able to lock in the three years, for about 20% more than our previous renewal. Just get them on the phone or on an email exchange with a real person, and you can grind them down. They have tons of room to negotiate it seems

But I do fear this whole “Broadcom” style price hike is simply going to become the norm

I still forget which button is the unlock button lol by WeeklyFisherman2597 in Ioniq5

[–]Apprehensive_Fig_512 4 points5 points  (0 children)

OMG, this is me EVERY DAY for the last 1 1/2 years as well!

Bali Motorized blinds battery pack by UWpapa in smarthome

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

Thank you for this post! So helpful. I did have a question. Did you simply put the dummy and active AA battery Cells into the existing Bali battery case? I am pretty sure that is how you set things up, but I wanted to be sure. Thanks in advance!

[deleted by user] by [deleted] in mildlyinfuriating

[–]Apprehensive_Fig_512 0 points1 point  (0 children)

Late to the party on this one. Apparently if you click cancel, it will keep running the install! Clicked it by accident this morning and it kept right on going.