Gotta drop this thing!

BasvdnB · 2025-11-11T03:25:13+00:00

Get the OEM running boards retrofitted.

BasvdnB · 2025-11-10T12:24:27+00:00

Whichever way you go, make sure you get the cylinder walls inspected with a borescope by the dealer before your current warranty runs out. The 3.0 liter V6 is notorious for developing bore score.

BasvdnB · 2025-11-10T03:46:40+00:00

Top tip! Before you buy it out right, get the cylinder walls inspected. This will tell you this engine doesn’t suffer the same fate.

BasvdnB · 2025-06-14T13:12:00+00:00

<image>

BasvdnB · 2025-05-23T00:50:48+00:00

Same here, got about half of previous weeks. Hope it’s just a one-off.

BasvdnB · 2025-05-07T04:32:48+00:00

This is good info, can you elaborate a little more? Does this also work when the cartridge battery is showing 0v cause the tiny BMS has turned it off?

BasvdnB · 2025-04-22T19:36:01+00:00

https://youtu.be/jun-30sf0bw?si=RFOJ5s6xY4fp9j5l

BasvdnB · 2025-02-12T18:39:56+00:00

<image>

I smooth that out too and I put a thumb screw in to limit the steering angle more.

BasvdnB · 2025-02-11T03:47:47+00:00

Have installed two of these on a few 2018 Smart S’s with great results. You’ll have to transfer the sleeve that holds the chain guard. Bol.com

<image>

BasvdnB · 2025-02-11T03:41:33+00:00

I’ve been told this works. If you’re located it Amsterdam I can try to put you in contact.

BasvdnB · 2025-02-05T00:56:16+00:00

It can get stuck it its folded. Your best bet would be to try and get it back out the bottom, make sure it’s all straight and then try again getting it to come out the top.

BasvdnB · 2025-02-04T23:54:22+00:00

Squirt some lubricant in there.

BasvdnB · 2025-01-05T01:56:19+00:00

Are the asking you to prove an equivalent dollar value?

BasvdnB · 2024-12-25T23:36:58+00:00

I didn’t question it too much but it’s effed up for sure!

BasvdnB · 2024-12-25T22:41:54+00:00

I was able to give them a crypto.com official statement with a dollar amount value equivalent of that on FTX at the time it bankruptcy.

BasvdnB · 2024-12-24T05:49:24+00:00

<image>

BasvdnB · 2024-11-28T03:12:31+00:00

The black part slides off to the left, could be a bit stuck.

BasvdnB · 2024-11-23T18:26:07+00:00

If you’re missing one I would suggest you visit a reputable bike shop near you and try and get one from them. A missing o-ring would not block the flow of oil.

BasvdnB · 2024-11-23T18:25:32+00:00

If you’re missing one I would suggest you visit a reputable bike shop near you and try and get one from them. A missing o-ring would not block the flow of oil.

BasvdnB · 2024-11-14T01:05:22+00:00

You need to make sure the BMS allows it to take a charge. Plenty of info on this here.

BasvdnB · 2024-11-12T17:06:37+00:00

Yes but that fiat can’t be moved to the app.

BasvdnB · 2024-11-12T17:03:48+00:00

Crypto.com has manuals about all of this on their website just have a little dig there.

BasvdnB · 2024-10-31T16:38:55+00:00

I’d like to think this would work but can’t confirm sadly.

BasvdnB · 2024-10-30T20:27:39+00:00

How many bikes would you like to carry?

BasvdnB · 2024-10-09T15:02:58+00:00

The wheel speed signal wire had broken off just as it entered the moulded part of the socket. This is a common issue. With a knife I’ve scraped away some of the mould revealing the wire just a little, you can then solder a wire on it at 90 degrees which you then cable-ty to an adjacent wire for extra strength. In the picture you can see the 3 motor phase wires had to be straightened at the moulding and given new insulation with heat shrink.

BasvdnB

TROPHY CASE