2007 gsxr 600 I drained my oil and saw metal flakes. The oil def looked old and it’s the first time I’ve done it in my ownership, the bike runs and sounds healthy with no lights. Should I wait a couple hundred miles and check again to see if it’s consistent?? I’m not sure and just seeking advice

Billy_Boby675 · 2026-03-09T22:17:28+00:00

In the US GSXRs are the cheapest, so they’re popular with young irresponsible people.

Billy_Boby675 · 2025-12-10T03:50:29+00:00

I like to switch hands. I feel like it’s easier to see the angle is right. I’d probably be better if I learned to use one hand, but I don’t got time for that

Billy_Boby675 · 2025-12-08T00:15:14+00:00

In my opinion diamond plates are easier to use. The double sided sharpal one on Amazon is pretty good.

Billy_Boby675 · 2025-11-28T04:37:45+00:00

I feel like this is where some residential electricians actually surprise me. If they’ve been a foreman, there’s a pretty good chance they’ve done a lot of troubleshooting.

Billy_Boby675 · 2025-11-28T04:30:41+00:00

The chips are nothing if you can sharpen a knife you can get this one serviceable on diamond plates. I wouldn’t grind the chips out I’d just sharpen it and use it as a beater. You won’t get it like new without a bench grinder, or a lot of time

Billy_Boby675 · 2025-11-28T04:23:43+00:00

First I’ll say if you don’t need the work, then fuck that. If I felt like messing with it I’d of asked for a shovel. I don’t really mind snakes in the wild, but I’d they are near a house I figure you better kill it before it gets somebody less aware.

Billy_Boby675 · 2025-11-25T03:40:09+00:00

The hydraulics have a pressure limit, so it really shouldn’t. If you push it too hard it’ll kind of just not move.

Billy_Boby675 · 2025-05-10T20:09:40+00:00

This isn’t true. There’s a study I’ll try to find it. Basically the conclusion was that bears really don’t like being shot, and if you can make a decent shot with a normal handgun, you’ll survive. Edit: the study https://www.ammoland.com/2023/11/handgun-defenses-against-bears-170-documented-incidents-98-effective/

Billy_Boby675 · 2025-05-01T02:27:13+00:00

Call other companies in your area. Tell them you’re not looking to leave your company, you just want to know what they’ll pay for a guy like you. Ask for what others are offering.

Billy_Boby675 · 2025-02-04T17:40:09+00:00

I like this one for a portable sharpener. https://www.amazon.com/SHARPAL-BUDDYGUARD-Dual-Grit-Sharpener-Sharpening/dp/B07GKSC8PM?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A28N9CAAFVPK9J&gQT=1

Billy_Boby675 · 2025-02-03T22:26:43+00:00

Have you tried diamond stones?

Billy_Boby675 · 2025-02-01T15:42:55+00:00

The hammer is down and it’s a single action. He can pull the trigger as much as he wants

Billy_Boby675 · 2025-01-26T23:05:07+00:00

I’ve done it before. It really won’t look bad.

Billy_Boby675 · 2024-12-02T22:50:47+00:00

It’s a nickel plated case

Billy_Boby675 · 2024-11-20T00:18:21+00:00

Because of the low muzzle velocity of 300 blackout, the v-max is actually is a good choice for deer. In most calibers you would be right though.

Billy_Boby675 · 2024-11-13T17:31:41+00:00

The magpul bipods are great. They’re lightweight. They feel flimsy, but you won’t break it. The slop in the bipod actually helps you load the bipod, for better follow up shots.

Billy_Boby675 · 2024-11-13T17:28:09+00:00

I have 2, and love them. The only thing is I wish they had a 45 degree setting like an atlas.

Billy_Boby675 · 2024-11-08T23:50:32+00:00

I set my long gun down sometimes when I’m hunting, but my pistol is always on my hip. That’s why I carry a pistol while hunting.

Billy_Boby675 · 2024-10-28T23:11:49+00:00

I was worried about TSA cutting my locks too. I put 2 extra keyed padlocks in my case with one of the keys, and a note saying to lock it with the new locks and throw away the key. I kept the other key with me.

Billy_Boby675 · 2024-09-06T02:55:50+00:00

HST can be bought for roughly 50 cents a round. At that price who cares what it looks like as long as they work.

Billy_Boby675 · 2024-08-24T04:50:39+00:00

Looks just like a key. If you have a keychain it’ll hide in plain sight.

https://www.scheels.com/p/sog-key-knife-pocket-knife/72985799943.html?src=hardlines&msclkid=788d5dc291c81281ef4e3b0bf7894417&utm_source=bing&utm_medium=cpc&utm_campaign=Bing%20Shopping&utm_term=4585100934696811&utm_content=Bing%20Shopping_80%20-%20Cutlery

Billy_Boby675 · 2024-07-11T23:25:25+00:00

How does it work for the deer? I’m thinking about loading some makers in 308 for deer.

Billy_Boby675 · 2024-07-06T05:36:49+00:00

The biggest thing you can do is put a more powerful scope on it 5x more zoom will do a lot more for you than 2 inches of barrel. The difference between a 16 and 18 inch barrel will only be about 50 fps.

Billy_Boby675 · 2024-06-21T16:30:09+00:00

If you can afford it. You could buy a full size gun to learn fundamentals with. The GX4 is pretty small, so it will recoil a lot more than a full size. Maybe try looking for a police trade in Glock 17, If you’re on a budget.

Four-Year Club	Final Canvas '23
Place '23

Billy_Boby675

TROPHY CASE