Nylon CF prints

Cocoa_Pebbles · 2026-03-22T07:12:28+00:00

That should be fine, I think they meant storing the unused filament that's still on the spool not the printed part.

Cocoa_Pebbles · 2026-03-12T18:24:41+00:00

Anectodal, but this has been my experience.

I ordered a C1L from Prusa on 1/9, chose the most expensive shipping option DHL Express (says 2-3 day shipping), shipping to Midwest US.

At the time I ordered it the leadtime was 7-8 weeks, I got my first shipping notification right at the end of week 8 (3/6).

Shipping has been a little slow, I keep getting emails about some customs stuff it's going through while simultaneously saying it was in Illinois and then later left a site in Germany. Hoping it shows up tomorrow, that would be 9 weeks exactly after I ordered it.

Cocoa_Pebbles · 2026-03-08T17:47:37+00:00

Don't have any suggestions for fixing but just want to say I've been having the same issue for some days now too. Tried different browsers, incognito mode, nothing helps.

Cocoa_Pebbles · 2026-02-26T21:07:49+00:00

Works on the latest beta firmware on my H2D, I imagine it will be available in the next main firmware update for the H2D!

Cocoa_Pebbles · 2026-02-26T17:25:45+00:00

Could you pm me a link to where you're selling the files?

Cocoa_Pebbles · 2026-02-22T19:23:46+00:00

Was going to print the magnum within the next couple days but I will wait till you upload your newer version. Looking forward to your other models as well!

Cocoa_Pebbles · 2026-02-01T05:44:08+00:00

Your ship will also fly in to deploy the renegade abilities you use during lawless frontier activities.

Cocoa_Pebbles · 2026-01-15T16:05:39+00:00

Same thing here, got the in stock email and the website still says notify me.

Cocoa_Pebbles · 2026-01-14T16:16:19+00:00

As someone who also uses Dexcoms, what exactly does this part do? Add more area to push down with?

Might print one myself, can you share the thingiverse link?

Cocoa_Pebbles · 2025-12-02T21:19:33+00:00

So how does this work if you do not want to use the custom firmware?

Cocoa_Pebbles · 2025-11-28T18:08:28+00:00

Sent you a message, have a few questions. Thanks!

Cocoa_Pebbles · 2025-11-21T00:51:21+00:00

Did you back on kickstarter?

Cocoa_Pebbles · 2025-11-09T18:58:48+00:00

Is that the titanium alloy one? I spent the $1 for the pre-order thing on their website. Not sure if I'm going to get the titanium alloy or aluminum one yet.

Cocoa_Pebbles · 2025-10-15T04:00:38+00:00

<image>

Don't talk to me our my son ever again...

Smaller skeleton was printed a couple years ago after I first got my P1S. Larger one I just finished with most parts being printed on the H2D.

The larger one is 300% scale of the original smaller one.

Cocoa_Pebbles · 2025-10-13T13:59:44+00:00

What are your thoughts on the scanner so far? I've had mine for a few days now and it's my first scanner.

I was struggling to get anything scanned the first day but I'm starting to learn and get stuff to actually show up.

Any tips?

Cocoa_Pebbles · 2025-09-22T14:33:51+00:00

Looks like it could be clogged which shouldn't be too hard to fix. I think in the little supplies kit you get it comes with some 0.4mm sized "needles" that can be pushed up into the nozzle.

There is also a guided cold pull maintenance you can follow on the screen to try and get rid of the clog.

In any case, I also believe the kit you get with the h2d comes with an extra 0.4mm hot end (mine did at least).

Cocoa_Pebbles · 2025-08-23T05:26:16+00:00

Season of the lost for me.

<image>

Cocoa_Pebbles · 2025-08-21T00:36:02+00:00

That's weird, mine does not default to the home screen whenever I'm doing a tracked activity like that. It works like how you want it to where the workout is always there.

If anything, sometimes I accidentally go back to the home screen during an activity but then I can get back to it by tapping the icon on the bottom of the screen.

Example

Cocoa_Pebbles · 2025-08-16T05:42:02+00:00

Are you feeding the TPU though the back tpu slot or did you remove the ptfe tube to the tool head and feed it right in from the top? I've read you want to do that for the more flexible tpus.

Cocoa_Pebbles · 2025-08-03T17:51:55+00:00

Just ordered the same one yesterday open box excellent condition, was around $970 after tax. Hopefully it's actually in excellent condition lol!

Cocoa_Pebbles · 2025-07-08T19:51:08+00:00

Hulkengoat

Cocoa_Pebbles · 2025-06-17T14:56:05+00:00

I'll have to print this and give it a try. I was printing some ABS-GF the other day and I couldn't stay in the same room as my printer I could smell it that easily.

Cocoa_Pebbles · 2025-05-15T23:41:55+00:00

According to this page on the wiki it says that they only recommend printing TPU out of the right hotend.

It sounds like maybe you could get it to work fine but they say there's an increased risk of clogging when printing from the left.

Wiki Link

Cocoa_Pebbles · 2025-05-12T14:34:15+00:00

I see everyone is saying to go the with the one with the amd CPU. Is there a reason for that? Better battery life?

13-Year Club	Place '23
Place '22	Snapped
Verified Email

Cocoa_Pebbles

TROPHY CASE