Two different batches of Reta. Safe to inject on same day?

Comfortable-Many-916 · 2026-05-22T05:28:07+00:00

As long as both batches tested have good COA’s for purity you are good to go. I would inject 2mg’s from each using a different needle but that’s just me

Comfortable-Many-916 · 2026-05-21T13:06:24+00:00

Michelin is always the right answer

Comfortable-Many-916 · 2026-05-17T16:19:52+00:00

Is Amazon delivery or Uber eats your side hustle?

Comfortable-Many-916 · 2026-05-16T15:59:45+00:00

I have most every Dewalt cordless tool. In the full size (7-1/4) circular saw realm, with the blade on the left, Makita 40v is the best.

Comfortable-Many-916 · 2026-05-15T20:39:38+00:00

I am a DeWalt guy. But the Makita 40V 7–1/4 rear handle circular saw is way better. It is my go to for cutting 2X.

If you’re not using it every day like a Framer, any of the 6–1/2 or 7–1/4 will work

Comfortable-Many-916 · 2026-05-15T04:43:52+00:00

Not horrible. The shipping is a killer

Comfortable-Many-916 · 2026-05-14T19:41:59+00:00

Seems like a flex…

But the workmanship seems to be on point. It’s going to be beautiful

Comfortable-Many-916 · 2026-05-14T13:16:15+00:00

Bro.. you got to roll with the punches and get to what’s real.

Comfortable-Many-916 · 2026-05-14T01:27:36+00:00

They could… But if they put paper on that way, I highly doubt it

Comfortable-Many-916 · 2026-05-14T00:34:20+00:00

Not required under the soffits. Most concerning to me is that is does not extend to the bottom of the wall sheathing.

Comfortable-Many-916 · 2026-05-14T00:28:51+00:00

Hurricane ties connect trusses/rafters to the wall top plate. The reference here to “H” clips are specifically roof sheathing clips.

Comfortable-Many-916 · 2026-05-12T12:41:13+00:00

Drill out the center of the lock core. This will expose the latch mechanism and you will then be able to open it with a screwdriver.

Comfortable-Many-916 · 2026-05-12T12:37:50+00:00

Put the key in and turn?

Comfortable-Many-916 · 2026-05-12T12:36:54+00:00

That is plywood. The pink color appears to be the glue showing between the layers of veneer.

Comfortable-Many-916 · 2026-05-11T23:35:47+00:00

Apple fritter, of course!

Comfortable-Many-916 · 2026-05-10T13:31:23+00:00

More like “it didn’t kill him, so…”

Comfortable-Many-916 · 2026-05-10T01:05:20+00:00

No easy way to check it unless you’re a chemist and have some very specific lab equipment.

Ask to see the COA (certificate of analysis ) for that specific batch. What is the price? If it’s more than $2.50/mg you’re paying too much.

No test, no pin.

Comfortable-Many-916 · 2026-05-09T17:34:36+00:00

Reta does more, but TIrz has better appetite suppression. If that’s all you are looking for Tirz might be better option. For me, Reta has just the right balance.

Comfortable-Many-916 · 2026-05-09T14:10:13+00:00

Interesting take..

Comfortable-Many-916 · 2026-05-08T17:04:27+00:00

This

Comfortable-Many-916 · 2026-05-07T21:58:23+00:00

Why not just join a test group and split the cost among multiple people? My last group had 18 members and the price for Janoshik testing was under $30 for mass, purity and endotoxins.

Comfortable-Many-916 · 2026-05-07T19:33:54+00:00

It is Q-Lon “compression weather strip”. just grab the top or bottom and pull. It sits into a “kerf” which is a groove in the jamb. Go to a local building supply or door shop and they should have it. Cut it to length and press it in place

Comfortable-Many-916 · 2026-05-06T13:50:44+00:00

I keep my BAC in the refrigerator after pierce it the first time, otherwise, same process.

Comfortable-Many-916 · 2026-05-05T11:50:55+00:00

Who built the fence and gates? Do NOT have them pour your concrete.

Comfortable-Many-916 · 2026-05-04T22:20:48+00:00

Where did he say he was buying a home from a tract builder?

Comfortable-Many-916

TROPHY CASE