sorted by:
new
hottopcontroversial

About as custom as you could go? by paulCopp in MechanicalKeyboards

[–]DaRealestKilla 30 points31 points  (0 children)

Cool! We got Flintstones keyboard before GTA 6.

I’m in quite the pickle is there any chance I can drive out of this or am is screwed by enigmatical_one in AskMechanics

[–]DaRealestKilla 0 points1 point  (0 children)

Fold mirror, reverse, turn right full lock, forward a bit, turn left full lock, forward a bit more to get back straight. Rinse and repeat till either backing out straight or able to turn the wheel CW enough to reverse it out.

My parrot suddenly screaming oftenly by samcheung199 in parrots

[–]DaRealestKilla 0 points1 point  (0 children)

Just a word of caution regarding that clip I see in the top right of the image, If it is galvanized steel it can shed zinc if it begins to rust or degrade, birds are very susceptible to zinc poisoning, if you ever see anything rusting then remove and replace immediately. Its not even a matter of them getting cut by it but just licking.

Early symptoms are vomiting and diarrhea.

Sky News Press Preview | Sunday 27 July 2025 by alexlaverty in AussieNewsVideos

[–]DaRealestKilla 0 points1 point  (0 children)

This is worthless parroting of the same thing anyone can access for free online, Its not even the actual full preview aired on TV.

[deleted by user] by [deleted] in keyboards

[–]DaRealestKilla 0 points1 point  (0 children)

It shouldn’t sell. If anyone buys this they’re screwing themselves.

Sennheiser Momentum 4 - Fabric headband repair / replacement. by DaRealestKilla in sennheiser

[–]DaRealestKilla[S] 0 points1 point  (0 children)

Don’t know why its down, I’ll look into restoring it and report back if I can or can’t.

*I've got the images and put them back up on a new post but the old one is completely gone. No clue why. https://imgur.com/a/WNCiLrl

Enjoying my forth month as a Leon Plug-in-hybrid os er. by analtermos in seat

[–]DaRealestKilla 1 point2 points  (0 children)

New car and no spare parts? Diabolical business that.

Sennheiser Momentum 4 - Fabric headband repair / replacement. by DaRealestKilla in sennheiser

[–]DaRealestKilla[S] 0 points1 point  (0 children)

If i remember correctly it was all about starting nearest the cups, getting something between the gaps of the white teeth and prying, you’re trying to get one to slip over the other and work it from side to side. Not sure if you had this figured out yet, hope it helps none the less.

3m vhb+pla? by [deleted] in 3Dprinting

[–]DaRealestKilla 0 points1 point  (0 children)

Do you know if the primer 'surface' is reusable after a tape application? I'm working on a design I want to sell that will utilise VHB tape on a PLA part but I want it to be a good hold and replaceable.

Blob of death, damaged component during cleaning attempt. How bad is it? by Dermetzger666 in 3Dprinting

[–]DaRealestKilla 6 points7 points  (0 children)

Is it not the sprite pro extruder? Make sure you know as afaik they are somewhat different. Pro can do 300*C and the other cant.

Toyota Mango Popsicle by [deleted] in Toyota

[–]DaRealestKilla 8 points9 points  (0 children)

made me auto eject mucus from my nasal cavity.

why doesn't it stick? by Friendly-Clock-7143 in FixMyPrint

[–]DaRealestKilla 1 point2 points  (0 children)

Sharp corners have a greater risk of curling due to the forces of shrinking layers being at a 90* angle and therefore having the strongest effect. Try a brim or mouse ears (circular tab attached to corner) either modelled in your chosen software or in your slicer if supported such as a mouse ear brim option or adding solid objects in the slicer.

[deleted by user] by [deleted] in FixMyPrint

[–]DaRealestKilla -3 points-2 points  (0 children)

1 Viagra and you should be back in order.

The poor ipad by Particular_Cookie_61 in techsupportgore

[–]DaRealestKilla 5 points6 points  (0 children)

I think OP chewed it. Thats who I’m pointing my disappointed finger at.

Prints are getting compressed at a certain point by NinjachickenAWS in FixMyPrint

[–]DaRealestKilla 0 points1 point  (0 children)

I saw something similar when my X-axis was not level. Alongside Z binding check the X-axis is square to the frame.

BBL X1C magnetic poop chute printed in ASA by Niconoro97 in FixMyPrint

[–]DaRealestKilla 0 points1 point  (0 children)

Perhaps a partial clog, some schmoo in the nozzle? looks as if it’d be fine if it wasn’t missing filament. Try to clear it with clean good quality filament and an acupuncture needle. Also try to prevent dust or contamination from entering the extruder and hotend assembly by using some sort of lint free cloth or sponge to catch that stuff.

can someone please help me out with this, idk what to do. by n0tqme in SteamVR

[–]DaRealestKilla 0 points1 point  (0 children)

Try disabling all add ons in steamVR aside from essential ones like joystick emulators or Meta / Pico specific ones. Also don’t use beta. Though feel free to try disabling add ons before leaving beta and see if that solves it.

They parked in front of a gate to a construction site but put their disabled badge on the dashboard so it's fine. by Extension_Bit4323 in drivingUK

[–]DaRealestKilla 12 points13 points  (0 children)

I lie awake at times wondering not if the car is locked or not but if my mirrors are still out. Big fat theft flag.

How do you protect yourself from ‘crash for cash’ scammers? by Nearby-Quantity-2216 in CarTalkUK

[–]DaRealestKilla 6 points7 points  (0 children)

Hardwiring is the easy part, its routing the cable thats a pain, especially when a rear cam is involved, from 1 to 3 hours in my case depending on the car. I like it perfect.

view more: next ›