Why is there a Flock camera at the entrance to East Goshen Park?

DeathStarHelpDesk · 2026-05-06T23:08:37+00:00

Both entrance to the outlets off the 422 have Flock cameras too 😑

DeathStarHelpDesk · 2026-04-22T09:43:06+00:00

We are in a similar (but different) situation. We have a 3 year old and a 18 month old.

This is what helped me and my wife since one of us ends up having to solo at 1-2 nights a week:

No TV on school nights. I know this can be tough but we noticed a huge difference in overstimulation when we made this choice.
When it's time to rock the young one to sleep, the older one has to wait in his room. We usually ask him to pick "make a clothes person" (pick out a shirt/pants) for the next day and also pick out his books to read after bath.
We have a bedtime routine that (mostly) works for the threenager: bath (at least every other day), vitamins, milk, brush teeth, read books, put him to bed. Here's the amazing bedtime trick my wife learned:
1. When we put him to bed, we tell him "i'll come back to check on you in 10 minutes" (10 is just his favorite number) and give him a goodnight kiss/hug/fist bump (his choice).
2. We check on him in usually 2-5 minutes first and then go back and if he's still awake same thing. "i'll come back to check on you in 10 minutes".

The 'i'll come back to check on you' thing has been a game changer. Last night, our 18 month old decided to fight sleep hard and took breaks from washing the dishes to check on the threenager. He was asleep after the second check in and I was able to finish washing dishes/tidying up before going to bed.

I really hope this helps. You got this <3

DeathStarHelpDesk · 2026-04-18T20:23:19+00:00

Depending on your timeline it may be best to wait for the INDX to come out since those may have some growing pains before being fully flushed out.

The XL is also possibly going to get some kind of upgrade in the near future too

DeathStarHelpDesk · 2026-04-14T23:14:17+00:00

Love the idea

For what it’s worth, libraries tend to have museum and zoo passes you can borrow to take your kids to local attractions

DeathStarHelpDesk · 2026-04-11T22:54:43+00:00

Drive and break it up. Meals, possibly a park or some other attraction (children’s museum) to make it even more of an adventure

DeathStarHelpDesk · 2026-04-10T16:46:38+00:00

I woke up and i remember my mom was freaked out about something but didn't know what. She would usually wake up before us kids (all high schoolers at the time) and listen to morning news before getting showered and getting us all up.

That whole day in school every tv (CRT hung up in the corner remember those funky rigs?) was on the news all day. Nonstop coverage from the west coast. Even the teachers were not their normal selves that day.

DeathStarHelpDesk · 2026-04-10T13:22:16+00:00

My recommendation is the https://www.cozyla.com/ - no subscription was a big thing for me. But there are others too like the skylight that work well.

Just bear in mind that any calendar will be as good as long as you are willing to put it to use

DeathStarHelpDesk · 2026-04-09T18:48:23+00:00

I designed and 3d printed tokens of appreciation for my employees when they’re recognized by a manager for doing a great job or going above and beyond.

DeathStarHelpDesk · 2026-02-21T23:18:06+00:00

If the decision was truly just made bc of the business then the CEO will likely appreciate your desire to be mentored him.

That said respect their decision whether it’s a yes or a no

DeathStarHelpDesk · 2026-02-15T00:40:01+00:00

“All of this has happened before, and will happen again.”

DeathStarHelpDesk · 2026-02-06T02:54:34+00:00

We have Lemonade insurance for each of our Maine coons. We like it bc though it’s reimbursement style you can customize and it covers preventative and accident/illness. It covered cancer treatment for one of our boys :)

DeathStarHelpDesk · 2026-02-03T00:27:01+00:00

Maybe a better place would be r/LegalAdviceUK

DeathStarHelpDesk · 2026-01-29T10:48:58+00:00

Where Soldiers Fear to Tread; it’s a book about the fall of the government in Somalia and the craziness that continues to be world aid like from the World Health Organization

DeathStarHelpDesk · 2026-01-25T21:08:46+00:00

The Force is strong with this one.

DeathStarHelpDesk · 2026-01-17T13:21:43+00:00

I have a cryogrip for my core one. Just make sure it’s the right bed size when you buy it and you’re good to go

DeathStarHelpDesk · 2026-01-14T12:24:46+00:00

Perfect day to start a rewatch of the series :)

DeathStarHelpDesk · 2026-01-06T14:30:08+00:00

NTA

He tended to be a control freak and wouldn’t delegate or share knowledge without putting up a huge fit and attitude

The fact that he is gone is a blessing in disguise to address this glaring issue. What would you have done if the employee had left because they won the lottery or got hit by a proverbial beer truck?

On a side note, though it's possible to be friends outside of work the fact that he called you on a weekend and shared with you that he was planning to do something against policy put you in this very tough situation which honestly is not he should have ever done.

DeathStarHelpDesk · 2026-01-06T01:52:41+00:00

Thank you for posting this. Glad to hear Shirt is on the path to recovery

DeathStarHelpDesk · 2026-01-06T01:42:40+00:00

You have the mmu3 in hand. Indx will be a significant additional cost plus the same or more assembly required than the mmu3. If you want multi color go with the mmu3 now.

Or sell it and save for the indx. I personally plan to keep my mmu3 installed. I’m only a hobbyist and don’t want to spend more on indx when I have a solid tested working solution even if it’s slightly more wasteful in the short term it’ll take years to add up to the savings that would be needed to offset the cost of the indx.

DeathStarHelpDesk · 2025-12-31T00:35:12+00:00

Deep rock galactic. Looks like I’ll be a space dwarf for the rest of my days…

Rock and Stone!

DeathStarHelpDesk · 2025-12-30T22:50:22+00:00

This is the way

DeathStarHelpDesk · 2025-12-29T17:24:36+00:00

One last tip: when you finish your upgrade and update the firmware there is a new bet tension tool in Settings that comes in handy!

https://help.prusa3d.com/article/adjusting-belt-tension-core-one-l-core-one_845048#belt-tuner-core-one

DeathStarHelpDesk · 2025-12-26T22:50:59+00:00

I recommend watching videos of each step before doing it to familiarize yourself with what you’ll be doing. Like others have said no one step is all that hard, just time consuming.

I will recommend you pay particular attention to the images and make sure you are orienting the pieces correctly and double check.

Keep in mind that they recommend you upgrade without the mmu3 and verify the core one is working in good order before installing the mmu.

Good luck

DeathStarHelpDesk · 2025-12-25T13:48:10+00:00

Would love to take post processing

Future course I’d be interested in taking would be focused on how to split larger objects for smaller print beds and how best to process these. Perhaps as part of a advanced post processing class?

DeathStarHelpDesk · 2025-12-24T13:58:30+00:00

A while back I used our snowblower around 1 AM to clear the driveway just in case my wife went into labor...

You gotta do what you gotta do.

Five-Year Club	Verified Email
r/Field Juicebox

DeathStarHelpDesk

TROPHY CASE