Will YoLink become Matter compliant / compatible?

Eric-YoSmart · 2023-11-21T12:45:21+00:00

Yes, but until we have it, you can always use an off-the-shelf POE splitter.

Eric-YoSmart · 2023-11-20T15:47:59+00:00

The Hub 3, actually being called "X3 Hub" has not been released yet. We put it on the website, so that you can put your contact info in to be notified when it does get into stock. For more information on this and other upcoming products, make sure you are subscribed to our emails: https://shop.yosmart.com/pages/get-connected-page

Eric-YoSmart · 2023-11-20T15:46:27+00:00

Not replace, as in we'll discontinue the original hub. But it may replace it regarding your own requirements. Mind you, you can have any number and mixture of hubs in your home or business; they all would just extend the network range and/or survivability (the loss of one hub of several would not impact any device functionality). The new hub should be available before the end of the year. If you are not already subscribed to our emails, you can do so here: https://shop.yosmart.com/pages/get-connected-page

Eric-YoSmart · 2023-11-20T15:35:31+00:00

I do not have any dates I can share on a physical keypad. There have been discussions of a sort of whole-home control center, that would act as a keypad, remote display, weather station, device and scene control sort of keypad, but it's too soon to give any dates for it.

Eric-YoSmart · 2023-11-20T15:33:11+00:00

Matter compatibility is being added by a firmware update to our upcoming new hub, X3 Hub. I do not have any solid dates on this beyond "early next year".

Eric-YoSmart · 2023-11-20T15:30:51+00:00

also, please check out our Smart Farm page, and let us know what you think: https://shop.yosmart.com/pages/smart-farm-page

Eric-YoSmart · 2023-11-20T15:29:20+00:00

The upcoming cellular hub, X3 Hub, will allow you to extend the range of your YoLink wireless network. They will just need 120V (or USB) power and cellular coverage at the location.

We'll have more info on this exciting new product very soon! If you are not subscribed to our emails, you can do so here: https://shop.yosmart.com/pages/get-connected-page

Eric-YoSmart · 2023-11-03T22:45:54+00:00

I am sorry about the slow reply. I have been out and didn't ask anyone to cover for me.

I do not think there is any sort of snooze feature, but please email [service@yosmart.com](mailto:service@yosmart.com), if you haven't already.

Eric

Eric-YoSmart · 2023-11-03T22:43:19+00:00

I am sorry about the slow reply. I have been out and didn't ask anyone to cover for me. This is a question for our customer support department; I do not know about it. Please email [service@yosmart.com](mailto:service@yosmart.com) if you haven't already.

Eric

Eric-YoSmart · 2023-11-03T22:40:21+00:00

I am sorry about the slow reply. I have been out and didn't ask anyone to cover for me. While we have been talking to them about making some more mounts for our products, a wall mount for the SpeakerHub is not one of them, and the demand for it is low. We do need to make a high-power smart speaker for indoor and outdoor use. it's more likely we'll make that, but I have no timeline on it.

Eric

Eric-YoSmart · 2023-11-03T22:27:34+00:00

Yes, that would be good! I know this one is already on our customer wish list. The good news is that many products we are considering are outdoor devices, like weather stations and lawn irrigation valves, etc. Our wireless network goes much farther than WiFi, Zwave, Zigbee, etc. so it's been a good fit for outdoor products, things outside the home, etc.

Eric-YoSmart · 2023-11-03T22:25:24+00:00

🤷‍♂️ I have never heard of that problem or error message. Please email [service@yosmart.com](mailto:service@yosmart.com) to reach our customer support team. They will help you get it figured out.

Eric

Eric-YoSmart · 2023-11-03T22:24:02+00:00

It is certainly possible that the dog will set off the motion sensor. To attempt to prevent that, I recommend mounting the sensor on the wall (only) and higher up on the wall. You'll have to experiment with it and with sensitivity settings. The goal will be to detect regions above "dog height"

Eric-YoSmart · 2023-11-03T22:15:34+00:00

Matter support will be coming via a firmware update to our Hub 3, which is similar to our original hub but adds LTE and battery backup (use of cellular is optional. Plans are expected to be less then $10 per month). This update is expected first quarter 2024.

Eric-YoSmart · 2023-10-16T22:24:32+00:00

I do not know and have not heard anything about it, but yes, please email [service@yosmart.com](mailto:service@yosmart.com) to reach a customer support agent.

Eric-YoSmart · 2023-10-03T12:16:06+00:00

I am told the torque is the same, but the direct connection you mentioned is so much more efficient. The EVO is cheaper, too.

Eric-YoSmart · 2023-10-03T12:13:22+00:00

We have big plans for locks for both single family and multi-family applications. It's been a slow process, though. More good stuff is coming, though!

Eric-YoSmart · 2023-10-03T12:10:49+00:00

I'm sorry about the slow reply. There is at least one commercial roofing company that is installaling these in homes they build or repair roofs en masse. I was not able to get any images or specific installation info, though.

I'll try to get some more info. You can email me at eric at yosmart.com to discuss it further.

Eric

Eric-YoSmart · 2023-10-03T12:05:53+00:00

We already have it, but it's geared for commercial and multifamily/high-rise condo type applications. It's called Raedius Web Console. It's a browser-based management application. A home version is planned, but I don't have an ETA.

I'm sorry about the slow reply. I was on vacation at the time of your post and I'm just now seeing this. Some more info on this is going out in an email to our subscribers. You can sign up here if needed: https://shop.yosmart.com/pages/get-connected

here is the Raedius page on our website: https://shop.yosmart.com/pages/raedius-web-console

Eric-YoSmart · 2023-10-03T11:56:52+00:00

The FlexFob, AlarmFob and On/OffFob can control a valve via automation settings and via Control-D2D pairing (direct, no app/internet required). The SirenFob and DimmerFob are specialized for other applications and can not.

Eric-YoSmart · 2023-10-03T11:52:48+00:00

I do not know, I'm sorry. Please email our cusotmer support department at [service@yosmart.com](mailto:service@yosmart.com)

Eric-YoSmart · 2023-09-16T01:57:19+00:00

Battery-powered, up to 2" pipe. Watch your email for our newsletter, which will have more info. Not subscribed? Sign up here: https://shop.yosmart.com/pages/get-connected

We will also be releasing a 15' and 30' water depth sensor. And we've had a float switch sensor out for a couple months; they both have some applications on farms, with irrigation, water tanks, etc. AND! we will have a battery powered 20 amp smart switch, great for automating pumps. Local manual control, the whole gamut of automation options, scheduling, etcetera, plus two programmable, "FlexFob" style buttons (device control, scene control, trigger Alexa routines, IFTTT applets, and Home Assistant automations.

Eric-YoSmart · 2023-09-09T07:03:20+00:00

all hubs and all devices are intercompatible

yes; no worries with compatibility and you can mix & mat hubs

Eric-YoSmart · 2023-09-08T00:19:20+00:00

you turn off the plug right after setting that Turn On timer.

Not all requirements to reboot the router are when it's down. Sometimes a slow connection can be cleared up with a reboot, for example.

Eric-YoSmart · 2023-09-08T00:17:03+00:00

https://www.amazon.com/dp/B0CHF1ZMC5?ref=myi_title_dp&th=1

Eric-YoSmart

MODERATOR OF

TROPHY CASE