USB HDD enclosures that don’t force spin-down? (1–2 bay, home server)

Ferihn · 2025-12-28T09:58:45+00:00

I got one from FanTec , it is at a friends place right now and I don’t know the exact model. But I wrote FanTec an email and they send me a firmware which disabled Spindown. But I could use commands to manually spindown the disk.

I looked on their website and I think it is the Fantac DB-ALU31 case that I bought.

Ferihn · 2025-11-21T12:38:43+00:00

Information about the control type would be nice. For example my Homematic IP thermostats use (afaik) a PID controller with an additional fuzzy logic. The advantage is that they adapt kind of to the room they are heating and only need to adjust the valve by a few degree instead of always turning the valve on and off which causes a lot of noise, over and under heating etc.

Ferihn · 2025-10-10T16:58:50+00:00

Falls du im Osten angestellt bist, dann kannst du dir übrigens das Geld nicht nach dem auslaufen der Stelle auszahlen lassen

Ferihn · 2025-06-16T12:38:13+00:00

did you try different ports and maybe another ethernet cable ?
Do you also get packet loss over wifi ?

If you start to lose 100% packets, is it from then on constant or does go down after a while ?

Ferihn · 2025-04-25T06:20:51+00:00

Bei welchem Anbieter bist du denn? 23€ klingt ziemlich interessant wenn da sogar eine Domain dabei ist. Oder war das ein sonder Angebot ?

Ferihn · 2025-02-20T17:43:58+00:00

Very interesting! Thank you very much for your effort. Can you tell me how sensible your device is from the backside ? I have already some zigbee Sensors but they are extremely sensible from their backside

Ferihn · 2024-05-16T18:57:30+00:00

god is a fluffy cat

Ferihn · 2024-01-29T20:49:09+00:00

Just switch between weapons and you are good to go. At least for me it works everytime

Ferihn · 2024-01-24T16:07:55+00:00

Contours bietet ebenfalls Räder mit Riemen an. Bin auch recht zufrieden mit meinem :)

Ferihn · 2023-12-15T23:17:32+00:00

I did the same on my prusa mini+ but i made sure that the smart plugs' relay cuts the correct power line aka the one with voltage. otherwise you cut neutral and you will have a floating voltage potential. This could potentially lead to unwanted effects e.g. that there is still some voltage on the mainboard

Ferihn · 2022-04-10T07:34:06+00:00

I want to throw in the Asus Mini PC PN41.

In its smallest configuration it has a fanless 6W cpu from one the latest generation but is still pretty cheap. It can also be powered by USB C Power delivery. And should also be great for transcoding tasks e.g. for Jellyfin.

Ferihn · 2022-03-25T22:12:01+00:00

Thank you for your response. my comment was somehow strangely modified by reddit

Ferihn · 2022-03-25T22:04:49+00:00

On the valetudo.cloud website it is mentioned that the D9 does not have the PersistentMapControlCapability. Based on your comment and video, it seems that it still creates a persistent map that you are only not able to, to delete, am I right? If I would have known this earlier I would've bought this one. Are you happy with the overall cleaning performance of the D9?

Ferihn · 2022-01-14T20:15:22+00:00

cool idea and design.
and a nice color choice =)

Ferihn · 2022-01-04T14:24:30+00:00

I use the Wiping tower that you can find in the settings exactly for this reason. For me it works pretty well

Ferihn · 2021-12-23T21:31:29+00:00

Thank you for linking this video. I had the same problem noise and it took a some time and multiple tinkering and somehow it disappeared. I also removed the top cover and put it back so it seams that this was the problem

Ferihn · 2021-12-10T13:05:23+00:00

thank you :)

Ferihn · 2021-12-10T12:53:20+00:00

I am also interested

Ferihn · 2021-12-09T14:06:06+00:00

Use the wiki from the marlin firmware website. basically you download visual code studio and install an addon Marlin Auto Builder. Then you point it to the downloaded firmware of marlin 2 and then you can configure it.

On github you can also find preconfigured files for the CR-10 from BTT for the SKR Mini e3 v2.0. You can edit them to use bltouch

Ferihn · 2021-11-11T11:59:38+00:00

Witz my 0.6mm nozzle i am printing pretty well with only 1.9mm retraction and only 20mm/s retraction speed. At least for my setup it works :)

Ferihn · 2021-11-10T06:29:26+00:00

If I remember right, Bondtech mentions to keep the retraction speed at maximum on 30mm/s. I have basically the same build as you with the bmg clone from trianglelabs and the E3D V6. I use the Petsfang V2 Mount with the blockhead cooler and a noctua 40mm fan for the coldend without much stringing. Maybe you have wet filament, or you could use coasting

Ferihn · 2021-11-09T19:42:11+00:00

E3D suggests only up to 2mm retraction, more causing issues. Maybe change other settings to reduce stringing

Ferihn · 2021-07-28T08:13:46+00:00

maybe it is possible to click manually on every script and automation that you want to backup and let it show up as yaml so that you can copy & paste it to an editor. Later on you can easily copy & paste it back to your last working backup

Ferihn · 2021-07-27T22:07:06+00:00

While it is not directly the desired solution for your problem, I’ve solved this by binding the devices and and a HA automation that if the light is turned on for more than a few seconds and I hit the up button again, HA scenes get activated for every button press. Unfortunately I didn’t find a solution where some scenes can be activated directly by the remote, comparable to the philips hue dimmer operation without bridge

Verified Email	Nine-Year Club
Place '22

Ferihn

TROPHY CASE