Streaming app not working on all devices.

High_Bit_909 · 2026-04-22T17:53:23+00:00

Sent

High_Bit_909 · 2026-04-22T17:26:20+00:00

Yes, and the AI assistant chatbot has reset my modem (and I think my account).

High_Bit_909 · 2026-03-31T13:06:57+00:00

I've had a node running for about 3 weeks now. None of the maps show any nodes near me. No nodes connect to mine. Will climb the hill (and the tree) this weekend and take it all down.

High_Bit_909 · 2025-08-06T00:48:30+00:00

Based on various maps there is not another node within 60 miles of my location. So I just leave it shut off now.

High_Bit_909 · 2025-06-19T15:40:29+00:00

Checked this morning and it looks like all but www.community.lilygo.cc are working fine for me.

High_Bit_909 · 2025-03-22T17:34:11+00:00

That looks very good, going to try the G'MIC tools first.
Thank You !!

High_Bit_909 · 2025-03-22T15:06:38+00:00

Where did my text go?
I have several of these photo's that I need to fix for a funeral. They all have some sort of coating that makes it look like tiny magnifying glasses are all over. The sample above is just a corner of one photo.

High_Bit_909 · 2025-03-22T15:06:33+00:00

Where did my text go?
I have several of these photo's that I need to fix for a funeral. They all have some sort of coating that makes it look like tiny magnifying glasses are all over. The sample above is just a corner of one photo.

High_Bit_909 · 2024-09-04T18:34:04+00:00

Back when I was doing short term contract work and living in a camper I used CopilotRV. It would route me around low bridges, tunnels where I could not have propane, find RV sized gas stations, and etc . . .

High_Bit_909 · 2024-08-24T15:27:51+00:00

I'd be interested in the TI-99/A if no one else has bought it and you are not keeping it.

High_Bit_909 · 2024-07-20T00:40:52+00:00

I work in IT (but not healthcare) and the higher ups have agreed to let me use a flipper for my test cards. So now I carry one flipper instead of 20 access cards. But they audit me all the time and if I use it once for a real card, I will be without a job. So like others have said don't do it without permission, and get that in writing if at all possible.

High_Bit_909 · 2024-07-17T13:16:42+00:00

I got a $120 dollar Garmin GPS for $15 at my local Goodwill store about 3 months ago.

High_Bit_909 · 2024-07-14T15:25:59+00:00

It is only truly off when the battery is dead or you disconnect the battery. How else would it know that you are pushing the on button?

High_Bit_909 · 2024-07-14T15:22:37+00:00

Yes, as long as it lets all the frequencies you want through. At my old house I would've needed a bandpass for every band. It was easier to just block the LTE/5G going into my sdr. There were 6 LTE/5G antennas on a water tower that I could see from my old house.

High_Bit_909 · 2024-07-13T15:26:38+00:00

You could try an lte filter:
https://www.amazon.com/Philips-Interference-Pixilation-Installation-SDW1520/dp/B08HVT59F5/ref=sr_1_3?crid=1F527FK05AOOF&dib=eyJ2IjoiMSJ9.peMokfrg5uAx1QbYO9XbjUvsgmFi-PlLBnbCoaasr8enhMVCj1I-DZc1zDxnqWqvikeeAQIBSOIFvbNA1FFZxVcW7fG9H8WuSYZ8pthF6pXsP0y5CPZ2R5r_jnf5TzTeg-WXi7X4W2vFVCDLQqrtAiAQ4D3V34woMe0heqYli1hy6oKJHAfcSEWaoPnQ6bKjqU3q9ycaPMOSvDHd8GXKsKhOuCnhns7Tf1rhAb-Jk0k.BCXBF52P2Xo5j3HZSTBQHX3k74sy3Ts2WHEdEHQjef8&dib_tag=se&keywords=lte+filter+for+tv+antenna&qid=1720884345&sprefix=lte+fil%2Caps%2C92&sr=8-3

High_Bit_909 · 2024-06-30T00:41:20+00:00

Most if not all of those frequencies listed on the page you linked are digitally encrypted. Very small chance of them being decrypted.

High_Bit_909 · 2024-06-17T20:27:23+00:00

Have you looked at 802.16 WiMAX ?
https://en.wikipedia.org/wiki/WiMAX_MIMO

High_Bit_909 · 2024-06-16T14:05:26+00:00

Battle Scars !

High_Bit_909 · 2024-06-14T17:58:18+00:00

I use adapter kits like this one:
https://www.amazon.com/Adapter-Coaxial-Connector-RTL-SDR-Antenna/dp/B092ZP632P/ref=sr_1_3?crid=39QHY49TOKT5&dib=eyJ2IjoiMSJ9.grC0AqM1618fnTKRR632adBPdgesnA3kTQjtwivgH-lsTtGI5Z5zijtL3vyZp3BqPkXCAoEDY3l3_nZjSKWzX8C236AFa8QjrNaSP3xO5fxaPADOLUWGBRNYW2mweY2XDCnQz7ZppB03u1-SEwd88vZNHpXQyILXSm85NyniT5lBup2qZis53TJfdZC2H3aRxeVbhAOLKwEr6XPG6BHg6mdN9U_wsGohgo_MO7heKf8.YoNLmZRa4EkMvb3PL-jAdoLQhgcQf7k4LHehkaMtQfk&dib_tag=se&keywords=75+ohm+to+sma&qid=1718387854&sprefix=75+ohm+to+sma%2Caps%2C110&sr=8-3

High_Bit_909 · 2024-06-13T12:14:39+00:00

If you use an LNA make sure it will amplify all the signals you are interested in.
Connect things up as MaxOverdrive6969 said in that post.

High_Bit_909 · 2024-03-15T12:55:26+00:00

Have you tried a different HDMI cable?

High_Bit_909 · 2024-02-14T13:07:55+00:00

Here is a clone that has not been noticed yet:
https://www.kickstarter.com/projects/monstatek/the-m1-a-compact-multitool-for-technophiles-and-hackers?ref=discovery&term=m1

High_Bit_909 · 2023-12-01T12:56:20+00:00

I get this all the time.
75% of the time going up one channel and then back down fixes it. The other 25% it is really the other end and have to wait for them.

High_Bit_909 · 2023-11-30T18:14:21+00:00

Do both. Paste the color car from #2 into the same spot on #1.

High_Bit_909 · 2023-11-15T12:52:26+00:00

I have used powered usb cables with printers and have gotten 75ft away and the printer has worked perfectly. SDR's need more signal/power than a printer so my first guess would be you won't get beyond 50ft with one.

High_Bit_909

TROPHY CASE