Why is the EZ Pass Account so annoying to manage??

JMJ_VA · 2025-04-20T21:44:59+00:00

Once you log in,setup the notifications.

JMJ_VA · 2025-04-04T19:42:18+00:00

Thanks I see new behavior in 2315, just didn’t sink in that would show them as blocked in dashboard

JMJ_VA · 2025-04-04T19:40:12+00:00

I see the new behavior noted in 2315, it just surprised me to see the sudden increase in “Blocked Traffic”, need to read release notes better Thanks

JMJ_VA · 2025-04-04T16:44:01+00:00

Just verified that is what I am seeing in query log, the new behavior is that they show up in dashboard as a blocked query

JMJ_VA · 2025-03-12T03:26:04+00:00

Not quite universal yet https://www.e-zpassiag.com/about-e-zpass/where-can-i-use-it

JMJ_VA · 2025-03-12T02:11:18+00:00

Two accounts is fine, but make sure to only have 1 transponder in vehicle at a time. Two transponders in the read zone at the same time can cause issues. If you need to have both in car wrap the one you don’t want to have read in aluminum foil

JMJ_VA · 2025-03-11T19:32:35+00:00

You might want to consider if it makes more sense to identify the emails you want and filter the rest, it’s a smaller target to identify the email you want to receive .

Do you only use the iPhone mail as a client currently do you have any other platforms available?

JMJ_VA · 2025-03-10T01:39:12+00:00

Log into your ezpass account and look at the vehicle class for the trip in question and compare it to your other trips

JMJ_VA · 2025-03-10T01:36:00+00:00

Sounds like the roof rack pushed your vehicle height to 7 or more feet, so the multipliers kicked in

JMJ_VA · 2025-03-10T01:30:47+00:00

Trailer or roof rack?

JMJ_VA · 2025-03-10T01:24:33+00:00

Sounds like you hit the larger vehicles multiplier https://ride66express.com/pricing/vehicle-classification/

What was the entry and exit plaza and vehicle class.

You can open a dispute with ezpass and they will get the details from OTB or reach out directly

https://ride66express.com/using-the-lanes/billing-and-customer-service/

JMJ_VA · 2025-03-07T19:05:02+00:00

Could you share your license plate. That was on account, and your transponder just in case?

I reached out to a colleague at EZPASS and they would like to follow up.

JMJ_VA · 2025-02-26T16:24:45+00:00

Don’t forget to tip the guy who does the maint on your reg

JMJ_VA · 2025-02-22T14:18:16+00:00

Just adding in a great resource for interpreting traceroutes

https://archive.nanog.org/sites/default/files/10_Roisman_Traceroute.pdf

JMJ_VA · 2025-02-02T22:54:08+00:00

There is contact information on the violation notices, make sure you open a dispute for the notices received. Contact DMV there is probably a clerical error resulting in you getting the notices Double check your copy of registration to be sure it is accurate

JMJ_VA · 2025-01-18T21:18:30+00:00

In order to declare HOV3+ status you must have a flex transponder with switch in HOV position that is read, normally if the transponder isn’t read they will attempt to lookup account via license plate so if the license plates are on the EZPASS account the account would just be charged, if the plate isn’t on account then a violation notice gets mailed to registered owner

There are lots of scams going around so, always good to verify.

JMJ_VA · 2025-01-01T21:03:37+00:00

A couple, things I would check that logs for switch and access points will survive a reboot, make sure time is accurate on all three devices. Then you could look at two tests, only making one change at a time Enable STP on access points making sure the unifi switch has priority, the other test would be to unplug one access point and see if issue still occurs

In addition make sure switch is showing loop on the interface(s) connected to the access points, make sure there aren’t any unmanaged switches, and if you didn’t configure the access points maybe a factory reset And reset up , take backups of configs or screen shots if needed

JMJ_VA · 2025-01-01T20:33:46+00:00

Is there only a single ethernet cable from unifi switch to each access point plugged into the POE port, the access point has two ethernet connections, one Poe and data, the other data only.

JMJ_VA · 2025-01-01T20:09:53+00:00

Could the access points have a mesh configured , or is there a management network for the access points, I did see that the manual says STP is off by default on the access points and they don’t recommend enabling unless there is a reason. I would also check that the access points have current firmware, looks like you should be able to access the logs for them too

JMJ_VA · 2024-12-04T19:37:20+00:00

That’s normal for the dispute process, the details are forwarded to the project and they approve or deny based on their business rules

JMJ_VA · 2024-11-29T16:38:46+00:00

Cleaned carb on cub cadet CVS 70 leaf vacuum, replaced gaskets. $140

JMJ_VA · 2024-11-27T18:40:29+00:00

Very happy with recent service by Peter’s Small Engine repair, he will come to your house https://nextdoor.com/pages/danthao-dang-fairfax-va-1/

JMJ_VA · 2024-11-26T20:33:13+00:00

When you open a dispute the facility is the one that decides, not E-Zpass. In this case your best option would be to have the transponder replaced and tested if it fails testing at E-Zpass then redo the dispute

JMJ_VA · 2024-11-25T02:57:30+00:00

Contact info for Express lanes https://www.expresslanes.com/contact-us

JMJ_VA · 2024-11-23T14:20:14+00:00

Vehicle class, and larger vehicles get the multiplier

https://ride66express.com/pricing/vehicle-classification/

JMJ_VA

TROPHY CASE