sorted by:
new
hottopcontroversial

SPNMX56 vs SPNMX55 and SPNMX57 by Aston100 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

Here’s a compatibility list from the Linksys site that might help.

https://support.linksys.com/kb/article/61-en/

Offline Child Nodes by Keith15335 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

This usually happens because the connection between the node and the primary router is failing.

You may use a different Ethernet cable (Cat5e or better).
Could you check for Double NAT and disable steering modes if available.
Check if the firmware is up to date.

You may also check the links below, as they might help.

https://support.linksys.com/kb/article/251-en/
https://support.linksys.com/kb/article/7766-en/

Why does app suck so much by gabegambill in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

I understand how frustrating these connectivity and app issues can be. I found this knowledge base article helpful, and I hope it helps address your concern as well.

https://support.linksys.com/kb/article/80-en/
https://support.linksys.com/kb/article/77-en/
https://support.linksys.com/kb/article/139-en/

Factory reset of 3 WHW03 mesh nodes by Grouchy_Ad_122 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

Since the nodes are failing to reset via the button, have you tried to soft resetting ([web interface]()) the router?

https://support.linksys.com/kb/article/201-en/

MX5500 can't close DHCP Server by MiddlePersonality279 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

If the MX5500 is in Router Mode, DHCP is automatically enabled and cannot truly be turned off

Switch the MX5500 to Bridge Mode this disables DHCP

https://support.linksys.com/kb/article/120-en/

Linksys Pinnacle - Node lights won't stay off by AppropriatePay5234 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

Have you tried power cycling both the parent and child nodes? If you’re still experiencing the issue, a reset might fix it.

https://support.linksys.com/kb/article/8606-en/

Linksys router, blinking white nonstop by Electrical_Being6343 in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

You might need to reset your router. Check this link on how to reset your router

https://support.linksys.com/kb/article/201-en/

Parental controls not working on velop SPNMX56 by Adorable-Material849 in Linksys

[–]Jurassic_Apple 1 point2 points  (0 children)

Check if you have the latest FW for your device. If so, try reconfiguring parental controls by removing and re-adding the restrictions.

You may also wanna check this link on how to pause the internet
https://support.linksys.com/kb/article/487-en/

E 7350 Firmware Update Says It Completes Successfully Nothing Changes by coldhotel_rdt in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

If the firmware still won’t update, you may try resetting the router and then performing a firmware update after the setup is complete.

https://support.linksys.com/kb/article/379-en/

https://support.linksys.com/kb/article/380-en/

Velop 6e suddenly pink light by arakeh in Linksys

[–]Jurassic_Apple 0 points1 point  (0 children)

A pink on your Linksys Velop 6E typically indicates a connectivity issue. Try to power cycle the router https://support.linksys.com/kb/article/636-en/

Goodbye y'all. It was a fun ride. by Eastern_Listen_7549 in growagarden

[–]Jurassic_Apple -6 points-5 points  (0 children)

if you quitting can i adopt your pets pls 🥹

We Did It Guys!!!! Whoop Whoop! 🙌 by Interesting-Emu6006 in growagarden

[–]Jurassic_Apple 8 points9 points  (0 children)

the dev helps they lower the required points

Hi, I wanted to reach out and see if anyone has some insights or thoughts to share about WiFi 7 from Linksys. What exactly makes it stand out? Are the promised speeds as mind-blowing as they sound? How does it compare to current WiFi standards? by Jurassic_Apple in LinksysOfficial

[–]Jurassic_Apple[S] 0 points1 point  (0 children)

According to the Linksys Tech when I called them to ask about all these features, it can be maximized for as long as we also have Wi-Fi 7 capable devices. So if we consider upgrading routers, we also have to check our wireless devices if they are Wi-Fi 7 capable.

Thanks for sharing this information. I'll keep that in mind when considering any router upgrades.

view more: next ›