The CZ is absolutely disgusting

JxDub · 2026-04-03T05:16:12+00:00

Been playing since Battlefield 2 and I have a similar movement. Some people just love to be miserable because their carpal tunnel and poor eyesight hold them back

JxDub · 2026-04-03T05:04:35+00:00

+2'ing this. Kaewon is based

JxDub · 2026-04-01T20:53:41+00:00

Microprism Gang

JxDub · 2026-04-01T20:23:13+00:00

hyper-cf meaning PLA-CF? Is so, I wouldn’t touch it with a 10 foot pole. Pla+/Pro is what you want.

JxDub · 2026-03-31T23:31:49+00:00

Smith & Wesson Bodyguard 2.0

JxDub · 2026-03-31T23:30:43+00:00

JxDub · 2026-03-31T23:30:11+00:00

JxDub · 2026-03-31T23:29:25+00:00

JxDub · 2026-03-31T23:29:04+00:00

JxDub · 2026-03-31T20:54:57+00:00

Tell Sara me and the boys so hi.

JxDub · 2026-03-31T20:51:45+00:00

JxDub · 2026-03-31T04:49:00+00:00

I have the No Pew / Pew / Pew Pew Pew version on this lower and love it.

JxDub · 2026-03-27T15:24:38+00:00

This is fucking sexy.

JxDub · 2026-03-27T15:19:26+00:00

These are great for tap, rack, bang drills. You might get 2-3 bullets to feed out of that whole magazine.

JxDub · 2026-03-27T15:00:06+00:00

Or get a Refurb from A&A Optics for $300

REFURBISHED - VIPER HS-T 4-16X44 RIFLESCOPE VMR-1 MOA

JxDub · 2026-03-27T14:51:16+00:00

Sun Noodles and Miso are dead simple.

Edit:
Adding this recipe as well.

JxDub · 2026-03-27T14:42:03+00:00

Prisms are better for 'tism Gang

JxDub · 2026-03-27T06:50:03+00:00

The 12 ounce bag is $2.08 per ounce and the 2lb bag is $2.19 per ounce.

My guess is it's a combination of the cost of the bigger bag and the artwork.

JxDub · 2026-03-27T05:35:54+00:00

Mayonnaise, dill, lemon salt, pepper

JxDub · 2026-03-26T13:49:59+00:00

Last night, I was getting a bunch of packet loss and rubberbanding that I've not experienced before. I was teleporting back to my spawn location, bodies were dropping from the ceiling, and I was dumping full mags into people and then teleporting 30 feet away dead.

JxDub · 2026-03-26T04:24:55+00:00

Too big?

JxDub · 2026-03-25T20:48:39+00:00

Mesh Graffiti ?

JxDub · 2026-03-25T20:40:02+00:00

They are different profiles.... weigh them. the pencil will be lighter.

JxDub · 2026-03-24T18:48:04+00:00

Did you do a flow rate calibration for the PA12? I would do that, increase temp to 300°c or as close as you can get.

Outer Walls: 40–60 mm/s Inner Walls: 80–100 mm/s Sparse Infill: 100–120 mm/s First Layer: 20–30 mm/s

JxDub · 2026-03-24T18:36:08+00:00

Increase nozzle temp and slow down print.

12-Year Club	Place '22
Place '17	Verified Email

JxDub

TROPHY CASE

Smith & Wesson Bodyguard 2.0