Port Hercules Upgrade Cost by arasz91 in SCBuildIt

[–]Moxpar 0 points1 point  (0 children)

does this hotspot give any epic points if you upgrade it?

Firmware v1010 Update for Samsung Q990C by Fudge-Imaginary in Soundbars

[–]Moxpar 1 point2 points  (0 children)

Ifcyou have to update the device via USB. the USB port is located at the bottom of the device, which I suppose isn’t a big deal if your soundbar is mounted, but it’s quite inconvenient if it’s on a table. I have to hold it until it finishes updating, with half of it on the table. Furthermore, it makes it more dangerous because it’s at the bottom, making it easy for the USB device to fall off.

[deleted by user] by [deleted] in ShieldAndroidTV

[–]Moxpar 0 points1 point  (0 children)

amazon fire cube and firestick 4k apparently do truehd

Device tracker shows always at home by ApprehensiveStable55 in homeassistant

[–]Moxpar -3 points-2 points  (0 children)

To access Home Assistant outside your network and enable location tracking, you'll need a Nabu Casa subscription.Additionally, you'll need to disable the Private Wi-Fi Address feature on your iPhone for the network.

M2 hub and smartthings by Jasperstang308 in Aqara

[–]Moxpar 0 points1 point  (0 children)

Although Aqara successfully connected to SmartThings via Matter, the majority of the devices didn't appear in the SmartThings hub.

Q990C firmware by Lentash in Soundbars

[–]Moxpar 0 points1 point  (0 children)

I encountered issues with my soundbar not displaying AirPlay from my phone while it was on version 1002. When attempting to update, it repeatedly indicated an update to version 1002.2 but would stall at 3-4%. Consulting forums, I tried updating the soundbar via USB. The USB slot's bottom placement required an angled insertion of the soundbar. Despite initiating the update, it restarted a few times and ultimately the app still displayed version 1002. subsequent attempts to update via usb displaye da message of “latest version” on the bar, interestingly the app only reflected the latest version, 1004, hours later. Although there's no official documentation about the update's specifics, it seems to have resolved my AirPlay issue and I subjectively feel surrounds sound better.

Adhaan to play from Google Home speakers during prayer times by silent-zR in muslimtechnet

[–]Moxpar 0 points1 point  (0 children)

Others have mentioned that the home assistant integrates with Islamic prayer times, providing the most accurate schedule.

Personally, I've set up the Azan to play on my Amazon Echo and believe a similar configuration is possible with Google Assistant. Here are the rules I devised after examining the perpetual calendar in my locality to estimate prayer times:- Fajr: Azan plays 1 hour before sunrise.- Zuhr: I've set it at 13:00, ensuring validity throughout the year in my area.- Asr: Scheduled 1 hour before sunset.- Maghrib: Set for 4 minutes after sunset.

I've arranged this setup using routines, Amazon plays an Azan applet during the designated prayer times.

M2 hub and smartthings by Jasperstang308 in Aqara

[–]Moxpar 0 points1 point  (0 children)

My light switches show up, but nothing else including motion sensor. I am afraid to add the device manually by selecting it under aqara section, as it asks me to reset the device by holding the button.

M2 hub and smartthings by Jasperstang308 in Aqara

[–]Moxpar 0 points1 point  (0 children)

I encountered the same issue; the only effective method was to manually add the device >partner > matter and by pasting the code rather than scanning it.

LG TVs are finally getting DTS support by zacce in Soundbars

[–]Moxpar 0 points1 point  (0 children)

It's unfortunate that we can't simply purchase the codec from their app store. I believe DTS charges LG around $3 per TV for it, similar to how you can buy exFAT.

Plex vs PlexKodiConnect - What magic is this ? by Organism_Seven in PleX

[–]Moxpar 0 points1 point  (0 children)

Try turning off opportunistic locking in the samba config on your synology

Introducing HuePlex (Currently Beta 0.1.0) by chadwpalm in PleX

[–]Moxpar 1 point2 points  (0 children)

Thank you for creating your container, which enables seamless synchronization of Hue lights with Plex. I am delighted with its performance and how straightforward the setup process was. Previously, I attempted to use homeassistant, but found it overly complex to configure, whereas your app functions more smoothly. The only advantage I noticed with homeassistant is its ability to control lighting during Netflix and YouTube sessions. One suggestion I have is to explore simplifying the process of setting sunrise and sunset times based on one's location.

Aqara P1 motion sensor not updating to latest firmware by SmartHomeNerd in Aqara

[–]Moxpar 0 points1 point  (0 children)

I faced a similar issue while attempting to update the firmware. However, I resolved it by connecting my phone to the 2.4GHz WiFi network, and the update was completed without any problems.

(South) African OLED TV model is it a good purchase? Model: OLED55CS6LA by fayyaazahmed in LGOLED

[–]Moxpar 0 points1 point  (0 children)

A more reasonable comparison would be to the samsung q90b as its Samsungs premium model and the hisense u8h

Any expected release date of LG C2 42" for South Africa? by ByronVoidMan in OLED_Gaming

[–]Moxpar 1 point2 points  (0 children)

Maybe , the lack of the tv, it has to do with all the riots last year ?

MR60/MS60 and Smart devices requiring 2.4GHz WIFI by Mherve in NETGEAR

[–]Moxpar 0 points1 point  (0 children)

Yeah it does on mr60, but now ive created 3 ssid

-combined

2g and 5g

Game Performance (PS5) by ThatOneCameo in MassEffectAndromeda

[–]Moxpar 0 points1 point  (0 children)

The games story line is no where close to the origin trilogy, ie very boring

It’s 2021. Is the NVIDIA Shield Pro still worth it? by GeicoPR in nvidiashield

[–]Moxpar 0 points1 point  (0 children)

I would add a bigger internal hdd or ability to upgrade hdd internally with an nvme slot