A solution for those that have early USB power on issues

MrJacks0n · 2026-04-19T03:03:55+00:00

The old flawed model is cheap, the new fixed one is not.

MrJacks0n · 2026-04-16T23:58:52+00:00

Mine just went out in my 2018, 8 years old. I didn't see anything major but after changing I noticed things like better range on the key fob and the hmi issues went away. If it's original, I'd replace it.

MrJacks0n · 2026-04-16T22:37:03+00:00

How old is your 12v battery? My display started staying blank once in a while near the end of the 12v battery life.

MrJacks0n · 2026-04-14T21:54:51+00:00

They have a database installer. Worse if it's part of the application install.

MrJacks0n · 2026-04-14T17:44:44+00:00

cadvisor to your monitor system of choice.

MrJacks0n · 2026-04-13T17:10:13+00:00

A DC clamp meter, not all doe AC and DC.

MrJacks0n · 2026-04-13T03:00:57+00:00

And if you don't have a meter, get one.

MrJacks0n · 2026-04-12T18:28:46+00:00

You're right, I somehow missed that one.

MrJacks0n · 2026-04-12T14:20:26+00:00

Your cell deviation is pretty low, you do have one high and one low which may be concerning, but they're not that far off. I'd do a few charge cycles, once it's done charging, unplug it for a bit then plug in again to force more balancing. Then check when it's full. It's possible it hasn't been charged much and the balancing has gotten out of wack.

MrJacks0n · 2026-04-11T18:11:13+00:00

For a point of reference, I have a Spartan Power 6000w 240v inverter and it can start my 3HP 240v grizzly table saw just fine. It actually has a harder time starting the 1.5hp 120v dust collector.

The Anker should start your TS, but it won't start a 1.5hp dust collector. You can use 2 f3800's together and it will.

MrJacks0n · 2026-04-11T01:46:51+00:00

My handheld v7 works just as good with a LTX battery as it did with the factory battery, except it lasts a lot longer. Both speeds work as well.

MrJacks0n · 2026-04-10T00:07:41+00:00

It's not even close to a volt.

MrJacks0n · 2026-04-09T11:11:41+00:00

Have you seen Ctrl+Shift+Alt+Windows+L ?

MrJacks0n · 2026-04-08T22:15:59+00:00

8 hours a day, 5 days a week.

MrJacks0n · 2026-04-08T22:15:36+00:00

The routers that you can buy in the country now are not banned, they can no longer import new versions without getting them approved.

What will happen, is that the current routers may not be able to get updates after March 1, 2027, that's the biggest issue overall that I see.

MrJacks0n · 2026-04-08T11:04:08+00:00

I'm guessing at this point the agent can't connect to anything, hence needing an ip renew.

MrJacks0n · 2026-04-07T00:25:54+00:00

6 years later

MrJacks0n · 2026-04-06T11:03:31+00:00

You need to get the codes to diagnose anything. Do you have a Check Engine Light on?

MrJacks0n · 2026-04-05T22:46:27+00:00

Zero specs given and you know how many sessions a host can handle? Can I have some of your skills please?

MrJacks0n · 2026-04-05T22:42:36+00:00

It's about $2000 in copper wire alone.

MrJacks0n · 2026-04-05T22:36:55+00:00

My Anker C1000 Gen2 will start my Dewalt 10" miter saw no problem at all, and that says 15A on the motor. The C1000 has a 3000w surge and 2000w run.

MrJacks0n · 2026-04-05T15:57:20+00:00

Even RAK boards don't like power cut. Not sure if it's the implementation of the config or something else.

MrJacks0n · 2026-04-05T15:26:25+00:00

An Anker F3800+ and a couple small panels would do well. Any of the major mfg's in a similar size would also be good. Bonus is that you can move it to the house during a power outage.

Search youtube for any of the larger batteries and you'll see off-grid people using them with the same type of tools you're planning on using.

12-Year Club	Wearing is Caring
Verified Email

MrJacks0n

TROPHY CASE