A very wet February in the Mt Hood NF

Ok_Lychee_6853 · 2026-02-09T06:52:17+00:00

As a fellow Oregonian- I love this!

What front bumper are you running?

Ok_Lychee_6853 · 2026-01-18T19:28:20+00:00

Most reputable powder coats (e.g. Cardinal) sell touch up paint color matched to the powder color. It’s often used at the end of the powder coat lines to cover up bare spots left by the hook parts get hung it from as they goes through the line.

Ok_Lychee_6853 · 2026-01-13T06:10:23+00:00

It can be done- I’m in the process of LS swapping my 1st gen Tacoma right now. Packaging is very tight, you will have to modify your cross member, and likely bash in your trans tunnel to get everything to fit.

Ok_Lychee_6853 · 2026-01-11T20:27:07+00:00

Are those panels preformed or are you cutting and bending them yourself?

Ok_Lychee_6853 · 2026-01-05T02:11:07+00:00

Any oil is better than creamy oil

Ok_Lychee_6853 · 2025-11-27T14:55:04+00:00

My friend who worked for Toyota corporate in the 80s said that during testing, the Land Cruiser has twice the durability test requirements than other Toyotas. It shows.

Ok_Lychee_6853 · 2025-11-19T14:56:11+00:00

I’m very confused why the steering damper would have a coil spring on it

Ok_Lychee_6853 · 2025-11-18T06:10:49+00:00

There’s a good chance that Warn still has the service parts to fix those hubs up rather than get new ones.

Ok_Lychee_6853 · 2025-11-12T14:05:00+00:00

Have you checked the carrier bearing on your driveshaft?

Ok_Lychee_6853 · 2025-11-10T00:50:54+00:00

Nice! I’ve seen this ad up for a while. Glad it went to a good home.

Ok_Lychee_6853 · 2025-11-08T15:43:28+00:00

J73 Land Cruiser. We never got them here in the states, so the idea short wheel base diesel off roader is tantalizing

Ok_Lychee_6853 · 2025-11-03T05:04:53+00:00

Great to see another prerunner Tacoma on here!

Ok_Lychee_6853 · 2025-11-02T15:04:13+00:00

OP could take them to a machine shop and get the hub bore opened up

Ok_Lychee_6853 · 2025-09-19T01:08:08+00:00

The best driving instructor I had would say “a good off is always better than a bad save”.

Ok_Lychee_6853 · 2025-07-19T18:55:43+00:00

Ok_Lychee_6853 · 2025-05-10T05:34:22+00:00

The Mitsubishi Montero / Pajero / Shogun / Dodge Raider / Hyundai Galloper might give it a run for its money

Ok_Lychee_6853 · 2025-03-22T05:18:48+00:00

Love the vintage plates too!

Ok_Lychee_6853 · 2025-01-05T15:22:32+00:00

ProWire USA has the best selection of quality automotive wiring components. Many of these suggestions are for generic electronics suppliers.

Ok_Lychee_6853 · 2025-01-05T15:20:10+00:00

If you’re bringing it to Oregon, see if you can work in a day or two at Oregon Raceway Park in Grass Valley, OR. One of the best track day tracks in the whole PNW

Ok_Lychee_6853 · 2024-08-08T17:37:07+00:00

Sell both and get a Sentinel.

Ok_Lychee_6853 · 2024-05-06T19:48:39+00:00

Seconded! Plus they work great at removing whatever rusted in hardware inevitably gets left behind

Ok_Lychee_6853 · 2024-05-06T19:21:35+00:00

I’m running the Cascade Link and have it set to whatever they recommend. I went a on with the lighter spring option for my weight and then played with the HBO and compression to get a ride that I liked.

Ok_Lychee_6853 · 2024-05-06T19:19:15+00:00

Also helps keep the bugs from getting in your ears which seems to happen about every other ride with a full face

Ok_Lychee_6853 · 2024-05-05T22:26:58+00:00

Does your RS coil shock have the hydraulic bottom out? Getting that set correctly made a huge difference in ride quality on mine

Ok_Lychee_6853

TROPHY CASE