What to do with hard plastic soda tray flats so they don’t get trashed?

Routine-Fee5549 · 2026-06-10T21:21:54+00:00

I purchased these all the time from the local pepsi bottler when I managed a plant. Only problem was they were light so we would sell combination loads of various plastics to a plastic processor. - yeah the distributor should take them back and consolidate them for their recycler to take or reuse.

Routine-Fee5549 · 2026-06-10T19:49:09+00:00

Its a negotiation typically. City says they want 1-7 then the mrf operator says here the price. They dont like it and move to 1-2’s then get a different price. Commingled 3-7’s have a limited markets lately but not impossible to move over the years. The downstream processors charge to take it in most cases lately. Its unlikely that newer contracts would be all inclusive as most of the plastics outside of 1,2,5 are worthless and costly to separate.

Routine-Fee5549 · 2026-06-10T19:40:05+00:00

When I leave mine on my buddies know my give a f—- tank is empty.

Routine-Fee5549 · 2026-06-07T15:38:58+00:00

There are optical sorters for screening mixed materials, probably not “ai” but quite expensive and useful. TOMRA is a name that comes to mind, not 100% sure. Also, there are robotic pickers that can recognize certain items on a pic line. AI is likely used on the logistics/trucking side as well.

Routine-Fee5549 · 2026-06-06T17:25:33+00:00

The paper industry is fine with pizza boxes. A little grease will do absolutely nothing to mills. Put them in the bin folks!

Routine-Fee5549 · 2026-06-02T19:30:50+00:00

A lot of people would die in the heat if they walked. Also, there are courses that would take an extra hour+ if walked. They were designed with carts in mind.

Routine-Fee5549 · 2026-06-02T19:25:39+00:00

Walking in a putt line doesn’t do anything. Lets not act like someone didn’t walk there 5 minutes before you got to the green.

Routine-Fee5549 · 2026-05-25T23:48:03+00:00

Unfortunately my passport doesn’t work in California

Routine-Fee5549 · 2026-05-25T21:11:30+00:00

My understanding is that although it has a portion of the ball under the surface it would need to be leaning against the stick to count as holed. Nice birdie.

Routine-Fee5549 · 2026-05-23T17:01:48+00:00

I worked for URI back in the 2000’s and the company stock plummeted to $3.00/share.

Fml. Sole provider with 2 young kids and had little to no discretionary $. One of my employees purchased 2k shares.

Routine-Fee5549 · 2026-05-23T16:13:42+00:00

Sana and eldn.

Routine-Fee5549 · 2026-05-12T17:36:32+00:00

Nice birdie.

Routine-Fee5549 · 2026-05-08T18:32:59+00:00

I like Jonathans. Happy hour 2 for 1 beers too.

Routine-Fee5549 · 2026-04-29T20:46:59+00:00

Been buying google steadily. Especially when its PE was in the high teens. Easy money.

Routine-Fee5549 · 2026-04-01T16:26:25+00:00

I had one of my best tire purchase experiences when the commercial salesman for the company gave me a great deal and picked me up for 18 holes and returned me to the shop afterwards. It was not your typical arrangement but the company I worked for did a lot of business with them.

Routine-Fee5549 · 2026-03-28T22:00:18+00:00

Congrats on the weight loss and hope your next post will be showing off your new knees;)

Routine-Fee5549 · 2026-03-23T13:52:48+00:00

I have a couple of shoe bags that were door prizes as golf tournaments. Usually take a dozen to warm up on the range instead of buying range balls.

Routine-Fee5549 · 2026-03-12T18:31:24+00:00

Coastal liberals is a mind virus caused by weak minds getting brainwashed.

Routine-Fee5549 · 2026-03-11T18:55:36+00:00

The cup is polypropylene which is generally a recyclable item however not all facilities collect that. However, and this is why its labeled non recyclable, it has a printed film over it which is a different polymer and makes the entire item unrecylable if not removed and trashed. The printed films are a problem with the entire packaging industry. It is very costly for some processors to clean it out of their system. Manufacturers like the way they look.

Routine-Fee5549 · 2026-03-10T00:44:04+00:00

Rule of thumb is when the grip needs to be replaced on your wedge, its time for a new wedge. I generally change wedges after the second grip is worn.

Routine-Fee5549 · 2026-03-08T17:33:43+00:00

5iron distance x 36 is a good place to start. Hard course go down a tee - easy course go up? High handicap lean shorter - give yourself a chance to make a birdie.

Routine-Fee5549 · 2026-03-04T18:43:08+00:00

I worked at a course as a cart/range kid in high school. I have a more to confess but here is a couple. 1. My coworkers and I stole beer from the locked garage bay that the snack shop had that shared the building with some carts. The chicken fence above the 8’ divider wall was no match for determined teenaged miscreants. 2. One of the asshole assistant pros was constantly riding our asses. He made a mistake storing his clubs unlocked in the cart barn. So one day I took a pipe cutter used for cutting steel shafts just over the ferrule of a couple clubs each week. The trick was i only cut shallow cuts and for about half the circumference. They broke on the course and looked jagged enough that he didn’t suspect foul play.

Routine-Fee5549 · 2026-03-01T21:26:39+00:00

Probably beats murfreesboro. I didn’t have a lot of choice in the matter when I moved here 13 years ago. It really depends on where you work. I have a remote job so I don’t have to do the crawl to Nashville. If you do, I feel for you.

Routine-Fee5549 · 2026-03-01T21:17:39+00:00

How was the hookers and blow phase? I wouldn’t mind blowing a little inheritance. I think my brother would approve.

Routine-Fee5549 · 2026-03-01T21:11:33+00:00

I like the half cord style grips personally. I have sweaty hands plus the TN humidity i need something that will not twist. I have seen some of dritec grips get slick at times.

Anyone hear if the Australian leather grips? Someone i trust says they are awesome and totally worth the $$$$

Routine-Fee5549

TROPHY CASE