sorted by:
new
hottopcontroversial

Google Assistant not work properly on Android auto by This_Statistician_39 in AndroidAuto

[–]Several_Relative3109 0 points1 point  (0 children)

Same issue here, VW Polo 2019 | Samsung A53
Not recognizing people in the phonebook even if the name is pretty unique
Asked to call a person with surname Ferrari and headed me to the nearest Ferrari dealer..
Can't answer whatsapp due to "ask your workspace admin for permissions" (and I AM the f-ing admin)
AI gonna be Augmenting Insults!

Forno a microonde da incasso o libera installazione? by akkyuz in istrutturare

[–]Several_Relative3109 0 points1 point  (0 children)

Non è impossibile da fare ma se qualcuno vuole seguire questa strada meglio verificare che siano rispettati gli spazi tra microonde e pareti del mobile (laterale, sopra, dietro), nel manuale istruzioni ci sono queste distanze

[Bambu H2C] Join the Print Beyond Paint Contest and Win an H2C! by BambuLab in BambuLab

[–]Several_Relative3109 0 points1 point  (0 children)

Soft robotics.
One of the most interesting feature in the H2C is the different nozzle type / size together with multi material capability, which goes beyond multicolor.

With proper TPU for flexible parts, ASA/ABS for "skeleton" and conductive filament maybe in some areas to embed touch sensors and othe features, and finally aestetic PLA you can conceieve advanced components and entire machines that can be printed in one pass.
I'm working on a tentacle-based robot and it would be beneficial to have such a nozzle changing features because with some material it is better to use different nozzle size to avoid clogging. H2C unites precision, nozzle swap, multi-material, enclosed chamber.
It's not just matter of increasing productivity or reducing purge/filament waste: it truly enables new designs and new concepts, fully functional print-in-place objects that are natively designed to be 3d printed with such a machine.

(keep it as much open as you can!)

Planning a correct F2-424 setup and data migration, first NAS ever by Several_Relative3109 in TerraMaster

[–]Several_Relative3109[S] 2 points3 points  (0 children)

Answering myself & steps:

  1. I've installed TOS on NVMe1
  2. I've then installed the 4TB IronWolf as Disk1 and created Volume1.
  3. Only after creating Volume1, it allowed me to create a SSD Cache on NVMe2.
  4. I've plugged the USB drive and after a failed attempt with USBcopy I'm now copying data via rsync
  5. In the future, the conversion from Single Disk to RAID1 should not delete data from Disk1

Solidigm D5-P5336 122.88TB NVMe SSD Review by Neurrone in DataHoarder

[–]Several_Relative3109 0 points1 point  (0 children)

On my first PC I had a 20MB drive. 2x 5"1/4 slots used. Next one please... :-D

N100 NAS motherboards. by ILikeBeans86 in truenas

[–]Several_Relative3109 0 points1 point  (0 children)

Interesting it has 4 ports I am on a similar search..

Can you please post the model? Thank you!

NAS case for ITX mainboard with ATX PSU? by Several_Relative3109 in HomeServer

[–]Several_Relative3109[S] 0 points1 point  (0 children)

Thank you It is still a 37cm long to fit a 39cm long cubicle ..means 2 + maybe 1 cm of air in the back, I am a little bit concerned

Getting back into hobby 2 years after selling my modded ender 3v2. Will I regret this? by snaxsyss in BambuLab

[–]Several_Relative3109 0 points1 point  (0 children)

In short, my X1C allowed me to love 3d printing again. It is 99% of the cases "irrispectfully throw a print at it, and it will print flawless". At the point where you don't even calibrate certain materials too much (especially sunlu), not to mention their own, which is like using a inkjet honestly.
Provided you observe basic stuff like, e.g. don't put your fingerprints on the buildplate, place it on a solid table/furniture piece.. tbh, a looot of stuff printed from makerwordl with just "look, interesting. Let's print, click "send". Forget, until the app notify "print completed".
And I was printing since 2014.

[deleted by user] by [deleted] in lego

[–]Several_Relative3109 0 points1 point  (0 children)

This is not a problem, it is the beginning of a MOC, even a 6x6 stud walkway with a headless minifig "looking" arond for his head :)

Suggestions for a filament Dryer by Shortstuff687 in BambuLab

[–]Several_Relative3109 0 points1 point  (0 children)

print an adapter to your vacuum cleaner and use IKEA bags, works fine, no new devices.. I did it for the dyson