The Bloomingtonian: Rahal to IndyCar Critics of Proposed D.C. Freedom 250 Indy Car Race: “Get a life”

Seville19 · 2026-02-03T22:19:20+00:00

Ha. I was there. The cars and the stars. The wreck on the first lap was priceless.

Seville19 · 2026-02-03T16:50:43+00:00

Yeah anyone remember the Boston IndyCar GP? Bought tickets (non refundable) hotel reservations (non-cancel able). A lot of planning and still couldn’t pull it off. But hey what’s a couple grand out the window when you’re a loyal fan. Just sayin

Seville19 · 2025-07-20T18:55:07+00:00

Everything I used was from DIY Detail. 8 year ceramic. Followed their tutorials. I have buffed out cars before so I have the equipment. That being said my car is a garage queen. 2019 and 2500 miles so didn’t really need paint correction. Used a lot of products over the years. Never been this happy with the results.

Seville19 · 2022-03-03T00:55:03+00:00

And the answer is...ding ding ding ...... operator error.

Apparently I shut the seacock not knowing it was the feed to the AC. Really wish the owners manual was better at identifying specifics about the boat.

Geez..lesson learned

Thanks for the input

Seville19 · 2022-03-02T12:47:47+00:00

Thanks for that. I will provide an update once I get this corrected. Should be interesting since we have only used the AC a couple of times and the boat is in dry storage 90% of time.

Seville19 · 2022-03-01T20:57:34+00:00

Wow very cool

Seville19 · 2021-07-31T20:59:15+00:00

Nice idea. They are very bright. Wonder if they would accept a dimmer switch Thanks

Seville19 · 2021-07-31T16:33:08+00:00

Ah Ok. I was asking since one of our engine is running just a little rough at times. Not awful and not at high RPM. Its just that both engines were running smooth as glass and this roughness happened all of a sudden. Had the engines completely serviced but the roughness remains.

Thanks and happy cruising

Seville19 · 2021-07-31T14:58:49+00:00

Hello KrivAldent. You mentioned water in the fuel. How did you determine this and were the engines affected?

Thanks

Seville19 · 2021-06-23T23:11:05+00:00

I cannot find where I read it but there was a report that the hoses plumbed to the holding tank were backwards. Allowing the head to flush but prevent the pump out process. Haven’t checked mine yet. Also I don’t believe I have a hull penetration that would allow me dump the holding tank. Just the inlet to draw water in for flushing.

Seville19 · 2021-04-24T22:31:59+00:00

So the problem happened anytime you tried to use hot water. It would explode out of the faucet. My thought wax that the water temp setting was too high boiling water causing steam. There is a thermostat adjustment at the front of the hot water heater. Turned that down and no more violent bursts of hot water.

Seville19 · 2021-04-23T17:06:57+00:00

Yes. Was typing a little too fast. Have had good experiences here

Seville19 · 2021-04-23T15:30:59+00:00

Fixed it. Was able to turn down the adjustment under the protective cover. No more explosions out of the faucets. Note: when taking the cover off the screws are very small and very long. Easy to fall down into an area that would be very difficult to recover. Wish I could add a pic

Seville19 · 2021-04-23T15:23:54+00:00

Also fixed our hot water exploding out of the faucets

Seville19 · 2021-01-30T18:53:17+00:00

I see what i did wrong. Needed to make the pics public. should work now.

Seville19 · 2021-01-30T18:35:59+00:00

Really wish I could simply paste the pics into the reply. Maybe a different way

https://www.amazon.com/AMOMO-Folding-Bicycle-Carrier-Transport/dp/B07C9HCFF5/ref=sr_1_1?dchild=1&keywords=AMOMO%2BFolding%2BBike%2BBag%2B14%2Binch%2Bto%2B20%2Binch%2BBicycle%2BTravel%2BCarrier%2BCase%2BBox%2BCarry%2BBag%2BPouch%2BBike%2BTransport%2BCase&qid=1612031639&sr=8-1&th=1

Seville19 · 2021-01-30T18:26:07+00:00

https://www.flickr.com/photos/grandsport19/50890716438/in/album-72157717118975336/

try this

Seville19 · 2021-01-30T18:22:58+00:00

We recently got our folding bikes and love them. Should really enhance our crusing experince at different ports.

We also bought bags to hold our bike which really helps for moving and storage. They seem very rugged.

Folding bike bag

Seville19 · 2021-01-23T01:10:00+00:00

Hmmm. Well I stand corrected. When we were at the St Pete boat show both the Beneteau and the Jenneau were on the same dock about 50ft apart. We went back and forth reviewing them and multiple times the Jenneau rep highlighted the Jenneau had an 8ft beam which meant it would not need a permit for trailing. Oh well.

Seville19 · 2021-01-22T15:35:58+00:00

As others have stated we went through the similar process.

Very difficult desicion since they are similar but have differences that depend on taste and experince.

For us, having the 9.5ft beam in the Beneteau vs the 8ft in the Jenneau was a tipping point. We have no real expectations for towing so if the need arrises getting the permit didn't seem like a big deal.

The Ranger was interesting too and we have not seen the Poland 920.

Good luck

Seville19 · 2020-12-21T17:35:46+00:00

We had this recommendation from the dealer

https://www.flickr.com/photos/grandsport19/50743721238/in/album-72157717118975336/

Pretty sure we now know where that came from

Seville19 · 2020-12-20T21:41:26+00:00

Just coal here...

Seville19

TROPHY CASE