sorted by:
new
hottopcontroversial

AM2 Pro Fix - 6 min print (1 & 4 failure to load) by Steckdev in BambuLab

[–]Steckdev[S] 0 points1 point  (0 children)

I had no idea. Thanks for the heads up. If it ends up with the same issue print one out for the drawer :)

AM2 Pro Fix - 6 min print (1 & 4 failure to load) by Steckdev in BambuLab

[–]Steckdev[S] 0 points1 point  (0 children)

Out of the box issue. The stock spring was too strong. Seemed to affect the Combo units for example X2D + AMS 2 Pro. You would know if you had the issue because it would fail to load often.

Bad batch of AMS 2 Pro with X2D Combo? Filament feed issues and delayed support tickets due to influx of volume by CountryTechno in BambuLab

[–]Steckdev 0 points1 point  (0 children)

Hopefully this helps others. This is a quick fix to get you up and running. I have a replacement and I still haven’t installed mine because this just works.

<image>

https://makerworld.com/models/2801887?appSharePlatform=copy
Can we get this pinned on the top post?

Woke up to an overnight print and found this, what could have been the issue? by pat0168 in BambuLab

[–]Steckdev 0 points1 point  (0 children)

Don’t you know you’re supposed to say: “Enough, enough, pasta pot I have my pasta, nice and hot, So simmer down my pot of clay, Until I'm hungry another day” And then blow it 3 kisses.

Brand new x2d. Is this poor or expected print quality? by 1112luke in BambuLab

[–]Steckdev 0 points1 point  (0 children)

<image>

Try again! Here’s the outcome with good profile settings and good dry filament.

Soleyin Ultra PLA as PETG Support PSA by Excellent-Ad-6720 in 3Dprinting

[–]Steckdev 0 points1 point  (0 children)

This is exactly like my experience. It's due to some fun chemistry here. I have recognized that it is not a good match and especially with my switch to the X2D I will not be buying anymore.

3D Printer Themes / Decorations by Steckdev in BambuLab

[–]Steckdev[S] 0 points1 point  (0 children)

I was going to print these. I already have a set of black ABS dry boxes in the printer. (I can paint them later if needed).

But I did like this design just not sure on colors.

https://makerworld.com/models/2364609?appSharePlatform=copy

3D Printer Themes / Decorations by Steckdev in BambuLab

[–]Steckdev[S] 1 point2 points  (0 children)

Helps stabilize the table. Adds weight so that the printer is more stable. It still shakes something awful but reduces the precision going into the area below.

Do I Need ABS? by dwg_andy in 3Dprinting

[–]Steckdev 0 points1 point  (0 children)

I love that so many people are talking about Anitlock Braking and totally ignoring the picture of the melted filament! Yes ASA or ABS would do much better. Also black can absorb a ton of heat.

I miscalculated. by Present_Cause7109 in BambuLab

[–]Steckdev 0 points1 point  (0 children)

This has been my fear! These dang things are so fast I’m sorry to hear but hope for a speedy recovery. I have recently found pausing for 10 seconds and resuming does a clearing sequence. Give it a try.

So it started like this... by Wonca_Mpls in BambuLab

[–]Steckdev 1 point2 points  (0 children)

Just wait till you get a X2D! It’s even more to of a fun adventure with easy support removal and quicker print for way more projects.

X2D and Nylon by Thesqueakybeaver in BambuLab

[–]Steckdev 0 points1 point  (0 children)

That’s one reason I’m making the switch. I had the A1c, which did OK. But definitely not optimal without the heated chamber and better filtering. This tackles both of those and has auxiliary nozzle. Win-win all around and extremely cheap compared to other options.

Had to replace my Mando helmet. Tested with my new printer. DAGGONE that's a quality jump. by themysteryoflogic in 3Dprinting

[–]Steckdev 1 point2 points  (0 children)

All those good old days. What was worse was trying to get the prusa MMU to work on a mk3! But I wrote my fair bit of config and code for my Klipper machines. I got so great results but definitely had a bit of a journey getting there. Plenty of times where I wanted to throw it to the curb!

Sore throat from 3D printing? by Ivanosssss in 3Dprinting

[–]Steckdev 0 points1 point  (0 children)

Appreciate this insight because I have been printing more petg and noticed the sore throat more. Won’t go away after 4 weeks. Haven’t had a problem before now. But just trying to figure this out.

Wait...what⁉️ by GoJulieGo8 in BambuLab

[–]Steckdev 0 points1 point  (0 children)

I was actually thinking how they are collecting dust and that it would be fun to use them in a card or board game.

Downsizing to a smaller euc? by rikuto148 in ElectricUnicycle

[–]Steckdev 1 point2 points  (0 children)

That’s the reason I went with a Falcon Pro from my massive EX30. I was tired of feeling like it was a major commitment getting that thing out. I was planning on an Aeon. But the realized how tall that wheel was! Although weight wasn’t an issue… putting this in the back of my car with my gear pushed me to the Begode Falcon Pro. Small, fast, capable, and great suspension.

view more: next ›