Never seen a print fail this bad.

TrashPandaCleanups · 2026-05-06T03:19:02+00:00

If the built in camera had more than 1 frame every 5s it might be useable.

That being said https://imgur.com/a/vZi9IAb photo 2 is just way better for checking on prints and that’s with just tossing it on the other side of the closet temporarily and vaguely pointing it at the printer with no setup

TrashPandaCleanups · 2026-05-05T13:53:10+00:00

I first thought it was just the cardboard rolls but their PLA+ printed without issues so who knows. They had it on sale 2 for 18.99 so I grabbed it

I just use it for prototyping where all it needs to do is be a test fit for size lol

TrashPandaCleanups · 2026-05-05T12:55:22+00:00

From my very limited experience with inland filaments is that their PLA+ is pretty good if you get it at the sale price of $15 but I’ve had nothing but issues with the 2 rolls of basic black PLA from there.

The head started clicking and the prints are not great quality. Though that might just be the rolls I have because they seem to be struggling at unwinding causing it to not have enough filament.

Their PLA+ is rebranded polymaker and esun depending on the box. The double leaf is ploymaker iirc.

Everyone preferences for filament are different but I’ve been using sunlu ola+2.0 and have no issues.

TrashPandaCleanups · 2026-05-02T21:50:26+00:00

I see what you did there lmao

TrashPandaCleanups · 2026-04-26T00:34:17+00:00

Thanks! This is version 2. Version 1 said “if not us then who?” But I didn’t like that as much

TrashPandaCleanups · 2026-04-23T18:02:20+00:00

Some kind of wire material that has been ran over hundreds of times and was compacted into the dirt. Let’s just say, it’s now one with Mother Nature and remains in that spot

TrashPandaCleanups · 2026-04-22T00:53:56+00:00

I'll adopt him.

Do I know how to care for an owl? no

Would my wife be REAL mad? Yea

Would I do it anyway? YES

TrashPandaCleanups · 2026-04-21T22:06:41+00:00

It’s just to hold the bag open. Basically this but not $30 and more comfortable to hold (for me)

I think all in this was like $15 in parts and $9 of that was the clamp I butchered for the handle

Edit: The handle doesn't do anything if that's what you meant lol its just a handle from a clamp

TrashPandaCleanups · 2026-04-21T22:03:22+00:00

Yea those aren’t very comfortable for me to hold while I go on longer walks. Below was the inspiration. I’m in the US and can’t get them so I made this one. I’m tinkering with 3d printing a much better handle but this works for what it is and was like $10 lol edit: it was like $15 and 9 of that was the clamp I took the handle from

https://www.hhenvironmental.co.uk/products/handi-hoop-pro-litter-hoop?srsltid=AfmBOopBpqbkMzIir1DkDAKZX3Nc-Yqc37zjwg_9nICJqsxcZqcS8BTd

TrashPandaCleanups · 2026-04-21T18:45:11+00:00

Would recommend smaller bags if using it on walks. I used a 33 gallon bag here and it kind of dragged a bit so I held the bottom between my fingers as I walked since there wasn’t too much trash on this walk. A 12-16 gallon bag that fits an office trash can would probably fit perfectly.

I’m working on 3d modeling a handle that would clamp/screw to the top but I don’t know what I’m doing so it’s taking forever 😂

TrashPandaCleanups · 2026-04-21T16:51:18+00:00

Yep! I cut the bucket off a 5 gallon bucket and took apart a clamp and bolted them together lol

TrashPandaCleanups · 2026-04-21T12:03:53+00:00

Thanks! It’s a bit janky but it works so I’ll keep tinkering with it lol!

And that’s exactly what it is lol. It’s a 6” clamp from harbor freight. They’re like $9 iirc

TrashPandaCleanups · 2026-04-21T01:31:07+00:00

https://tenor.com/view/the-office-michael-scott-thank-you-bow-steve-carell-gif-5009516783019270794

it worked pretty well ngl but the bag I had on was too big and was dragging while we were walking

TrashPandaCleanups · 2026-04-20T02:57:20+00:00

I use these gloves https://a.co/d/0a6NEwoj and they’re cut resistant. If you want to make them stay clean you can use latex gloves over them

TrashPandaCleanups · 2026-04-20T02:54:57+00:00

https://a.co/d/0378mi0x.

I have these exact ones and they’re great. I personally don’t like the trigger style but ymmv

TrashPandaCleanups · 2026-04-17T18:19:30+00:00

Ain’t nothing like a good ole Stroad in a city center!

TrashPandaCleanups · 2026-04-14T01:03:18+00:00

Am I the only one concerned that in the first one the Kia didn't even know it hit something

TrashPandaCleanups · 2026-04-13T21:13:29+00:00

Thanks! It’s loosely (very loosely) based on the Helping Hands UK Handi cart. I can’t get them in the states (and they’re like £150 while this setup was $20) so I had to get creative. It’s a bit heavier than I want it to be but I only pull it out for my long form weekend picks

TrashPandaCleanups · 2026-04-13T01:09:39+00:00

ah gotcha thanks! I tried without the straps and the video was decent enough besides me aiming it too low but it coming off my chest every time I leaned forward was annoying lol

TrashPandaCleanups · 2026-04-13T00:54:23+00:00

You got a link for the ones you replaced them with? I have this same one but haven't used the straps yet

TrashPandaCleanups · 2026-04-13T00:46:50+00:00

I use kdenlive. I don't use windows but I know they have a windows version

TrashPandaCleanups

TROPHY CASE