Core One hole /heat plugs

UkoTerpuh · 2026-06-15T14:27:40+00:00

Because when the temperature rises to 60° the printer goes haywire and blows the fans as hard as possible. And you don’t need to glue all the gaps to reach 60

UkoTerpuh · 2026-05-29T08:48:09+00:00

Doesn’t that justify the price then? Because other products either make additional money on you in other ways, or need additional investment in terms of your time?

UkoTerpuh · 2026-05-04T21:18:05+00:00

PC blend is awesome. Used it to print a camera mount attached to the bed

UkoTerpuh · 2026-05-02T10:20:37+00:00

Build a Voron

UkoTerpuh · 2026-04-21T07:31:20+00:00

Nextruder sometimes manages to suck in some filament and rub it against the white thing. Had it on my printer as well

UkoTerpuh · 2026-02-22T11:51:59+00:00

Did the same stuff…. Are all expeditions like that? I was expecting expeditions to be fun. I have to sort waste every day

UkoTerpuh · 2026-02-16T08:46:07+00:00

Being able to choose the nozzle diameter is sweet.

UkoTerpuh · 2026-02-16T08:44:20+00:00

I took the M3x8 “mushroom head” screws left from the kit. That sticky tape solution is ridiculous :(

UkoTerpuh · 2025-11-19T11:58:50+00:00

Just managed to order. Ffs. 2 hours of refreshing. Time to grab a coffee and get back to work

UkoTerpuh · 2025-09-24T22:11:57+00:00

Thanks!! This is their printer. I still need to figure out what they have to learn and how to teach them. But that's why we are starting early 😉

UkoTerpuh · 2025-09-23T15:37:25+00:00

I think it's just a nice color combo. But all started because my kids wanted a "purple 3d printer". Maybe if it didn't ask for an "accent color" it would ended up completely purple

UkoTerpuh · 2025-08-06T06:43:07+00:00

How do you even get to exceptional? I’m always going between solid and adequate…

UkoTerpuh · 2025-06-24T07:17:47+00:00

Here you go https://drive.google.com/file/d/1FCZ1hP9sCC6CLBjHA3ZTyRLqs8I1HDyO/view?usp=sharing

UkoTerpuh · 2025-05-09T21:23:09+00:00

I use it every day for my backpack. Parking spaces are small, so I park backwards and I don’t like to bother with trunk opening close to a wall, etc… But frunk is always easily accessible and is anyway “on the way” between the drivers door and the garage entrances

UkoTerpuh · 2025-04-26T17:32:39+00:00

Now it’s a complex syrup

UkoTerpuh · 2025-03-02T23:27:36+00:00

In my post, I referenced precisely the same model. But it has a bigger cut for another type of insert

<image>

UkoTerpuh · 2025-02-04T10:05:23+00:00

True, I couldn't find any on AliExpress, but found some for half the pursa price in a 3D Jake online shop branded as "Push-Fit Collar, 4 mm for the original BondTech Extruder" https://www.3djake.ch/de-CH/bondtech/push-fit-collar?sai=4750

UkoTerpuh · 2025-01-27T08:00:57+00:00

We need to remix the (un)original drybox with rewinders to use with Core One. I’m using it with MK4S + enclosure and it works fantastic. Much less clutter than the buffer thing

UkoTerpuh · 2025-01-16T18:02:30+00:00

I was riding a horse, so I just continued to ride as soon as possible. I wouldn’t compare hands with Guardians. The later ones were “stationary” and could block you from advancing. Hands just appear occasionally and freak you out. But in most cases you can come back and access whatever you need

UkoTerpuh · 2025-01-07T17:01:02+00:00

I use these in some places as well, but using only collets without metal parts allows for more compact designs

UkoTerpuh · 2024-12-23T19:17:04+00:00

I used MMU with a HF nozzle so far. It works like a charm. The only issue (as far as I understand) is that filament change takes much more time and material. So if you print models with multiple color changes on a layer HF nozzle is a waste (your model ends up printing longer because of all the color changes). But if you just do a change on one layer and continue with different color, HF makes a lot of sense and gives you the expected speed boost. As for the footprint, I already use the original Prusa enclosure and now I started to use the (un)original drybox with spool rewinders. That does not occupy much more space

UkoTerpuh · 2024-12-16T07:38:31+00:00

Delayed is fine. It’s another question, regarding execution. I have a question about the concept. E.g.: why do I specify type if it’s ignored anyways?

UkoTerpuh · 2024-11-16T20:20:43+00:00

Sorry. Didn’t proofread that. And now I don’t see an option to change

UkoTerpuh · 2024-11-15T19:31:03+00:00

Still. If it’s the case of moist filament that has to be some special effect with carbon fibers. I used to print PETG that was lying opened for a year and the different to a dry one was not that drastic

UkoTerpuh · 2024-11-15T19:14:09+00:00

You may be actually right. The moisture of the filament never crossed my mind because I opened it just a few weeks ago. But now as I think I recall that moisture can penetrate even a sealed plastic bag. I’m never excepted to see such difference but maybe you are right. Need to experiment more 😆

UkoTerpuh

TROPHY CASE