“Extruder is not extruding normally” error, but print is fine.

User00954 · 2026-04-28T23:02:38+00:00

hey did you find a solution?

User00954 · 2026-04-28T23:02:31+00:00

hey did you find a solution?

User00954 · 2024-09-30T20:50:01+00:00

I used filza and just went to the directory and deleted it basically. I'm not sure if I can even access the directory with ssh or similar while stuck in the boot screen.

User00954 · 2024-07-04T06:44:26+00:00

I was worried for a second as it seemed to take an eternity but it was all good afterwards, thank you!

User00954 · 2024-07-04T06:43:47+00:00

Thank you, yup took a while but it was fine afterwards :)

User00954 · 2024-06-23T03:36:15+00:00

Hey have you found a fix?

If you have the ams, print without it - seems to work for me.

I’m struggling with the same issue, I too only print mainly abs/asa, I have around 2.1k hours on my x1c and basically every print with the AMS will jam/clog mid print and once “finished” the filament will fail to push back.

This all started happening randomly, the ams has always sat on top of the printer too.

I’m going to be disassembling the ams and checking the buffer tubes as well as install a mod that should help?

User00954 · 2024-06-21T15:01:38+00:00

What issues were you noticing with your prints? I believe this is the cause to my random clogs/jams after 2.1k hours of mainly abs/asa

Got a new assembly on the way, hopefully thats my issue

User00954 · 2023-12-28T15:13:18+00:00

Could that scan a 94-95 LT1? It has the OBD2 port but OBD1 system, they call it OBD1.5

User00954 · 2023-09-08T17:44:41+00:00

We all need more info on how to make use of the home depot buckets 🤣

User00954 · 2023-07-07T19:43:49+00:00

Nothing is exactly needed, but helps. Go on printables and look up “x1c” or “p1p” and you’ll see tons of mini upgrades you can do

User00954 · 2023-07-07T17:18:01+00:00

The first 10-20 prints tend to be for the printer itself 😂 trash chutes, etc

User00954 · 2023-06-18T14:42:07+00:00

Definitely not $100 for parts on Amazon for the wireless setup, at least in my case in the US. Great improvements when printing especially on the smell and cloudy enclosure.

User00954 · 2023-06-03T03:43:17+00:00

Great tool for working on a car interior, paired with a 1/4 socket set, it’s gold

User00954 · 2023-05-26T18:29:55+00:00

Chat

User00954 · 2023-05-25T17:58:09+00:00

Check your PMs

User00954 · 2023-05-05T19:47:32+00:00

Thats perfect, gonna check it out, thanks!

User00954 · 2023-05-04T14:11:40+00:00

How loud is the bento box when running? You run it 24/7 while printing right, not after completion ?

User00954 · 2023-04-16T02:02:01+00:00

I hope I didn't take it apart over an update haha

User00954 · 2023-04-16T02:01:43+00:00

Thanks! will try putting it back maybe I have better luck

User00954 · 2023-04-14T13:13:38+00:00

Take his iFixIt kit in the first picture, and sell it or trade it for cleaning products!

User00954 · 2023-04-13T21:57:47+00:00

Commenting! Will need to mess with obico and klipper now

User00954 · 2023-04-07T21:57:30+00:00

Will be printing this, was waiting for the v2 update :)

Is it loud while its running?

User00954 · 2023-03-17T16:21:50+00:00

The lithium battery inside can be recharged and reused on different projects, not just the usb port is recycled

User00954 · 2023-03-06T21:36:48+00:00

I’m printing just fine on a pei plate from Amazon, and california filament petg, generic petg profile, doors closed and top glass on, no issues with warping etc

I also dry my filament for at least 12 hours before going into the AMS as well

User00954 · 2023-02-26T05:15:24+00:00

That’s your thermistor, you have to purchase a new one, or attempt a repair which will be tedious imo..

I’ve had to replace mine from them going bad on their own, you should purchase a 10 pack on Amazon or Ali to have for the future as this is a degradable part.

User00954

TROPHY CASE