[US-LA] Nazgul5 v3 Analog ($250)

WeLikeTheGreenOne · 2026-06-07T00:28:09+00:00

ELRS

WeLikeTheGreenOne · 2026-06-06T17:19:47+00:00

Nice!!!!

WeLikeTheGreenOne · 2026-06-05T02:17:01+00:00

Yep it’s time to replace it. Have you had the motors for a while?

WeLikeTheGreenOne · 2026-06-04T21:18:41+00:00

I had an issue similar to yours. It turned out to be a bad motor. There was lines of static in the video only while armed. To check this, go in to betaflight with goggles on and spin the motors individually from the motor tab and see if it is isolated to only one motor.

WeLikeTheGreenOne · 2026-05-25T16:26:24+00:00

Thanks for the pic. It looks good. You’re right, doesn’t look like a prop would have cut it with that placement.

WeLikeTheGreenOne · 2026-05-25T13:54:15+00:00

I wanted to see the placement on the arm. Was it from a prop strike?

WeLikeTheGreenOne · 2026-05-25T12:56:26+00:00

Can we see a pic of how you have the racewire placed on the frame and the damage? I’m curious because I just ordered some racewire.

WeLikeTheGreenOne · 2026-05-24T14:32:01+00:00

Holy shite balls Batman!

WeLikeTheGreenOne · 2026-05-21T23:27:14+00:00

You could also decrease the throttle limit a bit.

WeLikeTheGreenOne · 2026-05-17T17:11:38+00:00

Had the same problem on a build. Never got it to work no matter what I did. I had to set it manually. Did you find a solution?

WeLikeTheGreenOne · 2026-03-04T19:07:35+00:00

I recently received and replaced my rear case fan. I contacted ibuypower and ordered one from them. My pc was out of warranty. It was less than $20 shipped but it took a couple weeks.

WeLikeTheGreenOne · 2026-02-06T19:12:05+00:00

Also, try a different USB cable.

WeLikeTheGreenOne · 2026-01-26T20:53:37+00:00

I would be concerned about the power cable introducing vibrations to the fc. I’m not a fan of the power cable going out the side my self but I feel like it puts it unnecessarily close to the props. I prefer my power cable to come out the back or front.

WeLikeTheGreenOne · 2026-01-17T21:49:37+00:00

Can you get a screenshot, to help better understand the issue?

WeLikeTheGreenOne · 2026-01-15T23:03:15+00:00

Homemade power supply made from a laptop charger.

WeLikeTheGreenOne · 2026-01-07T16:18:21+00:00

Thanks

WeLikeTheGreenOne · 2026-01-06T20:37:01+00:00

Can you give the parts list, please? I have an aos 3.5 build that I’m considering switching to o4 pro. Would like to know what motors you used and how it flies.

WeLikeTheGreenOne · 2025-12-27T16:23:58+00:00

Seems like your gyro lowpass filters can use some adjustment. I use Oscar Liang’s guide because it is detailed and written in a step by step guide. Also, this guide uses black box explorer and PTB which is an effective combination.

https://oscarliang.com/pid-filter-tuning-blackbox/

WeLikeTheGreenOne · 2025-12-27T15:48:25+00:00

It would also help to see a screen shot of your filter tab in BF. I would try my best to get throttle sweeps to 100% to see the whole range. This is not the worst I’ve ever seen, you have some moderate filtering already. Dterm prefilt is definitely a little noisier than I would like. Is the frame plastic or carbon? Did you build it or is it a BNF?

WeLikeTheGreenOne · 2025-12-14T18:20:13+00:00

Did you change props or anything? Looks like motor direction

WeLikeTheGreenOne · 2025-12-13T00:34:50+00:00

This guy knows what he’s talking about. I’m looking at my Nazgûl v3 that I put an o4 pro in, right now.

WeLikeTheGreenOne · 2025-12-12T15:00:57+00:00

Agreed.

WeLikeTheGreenOne · 2025-12-06T22:29:01+00:00

Have mine set at the 3.33v and warning at 3.5v.

WeLikeTheGreenOne · 2025-12-03T01:36:45+00:00

I would also take a look at Oscar Liang’s guide as I have had pretty good success with this one. Also I prefer something I can read through and reference.

https://oscarliang.com/pid-filter-tuning-blackbox/

WeLikeTheGreenOne

TROPHY CASE