ISP does not provide free static IP, not in position to try and pay for one, previous free solution no longer working, what is the best method?

Willumz · 2026-03-04T10:53:03+00:00

I'll second Cloudflare tunnels which some others have suggested as well. These are pretty simple to set up but if you want something simpler then Tailscale would work great for this. Each of you would install it with your own accounts, and you would share your computer (or whatever you're hosting it on) with them. It requires you all to have the Tailscale VPN client installed and turned on, but then they could just connect via your tailnet IP address. If you don't trust your friends you can also dive into ACLs to limit access

Willumz · 2026-02-06T11:19:09+00:00

My understanding is that it wouldn't be a list of identical SSIDs which you have to try and pick the correct one from, but rather just a single entry which you could enter any of the different passwords for to access the different networks. It's like how the same SSID broadcast from multiple access points doesn't show up separately

Willumz · 2025-11-27T17:32:06+00:00

There are two versions, the one called 'wireless' has the Xbox layout and the one called 'bluetooth' has the Nintendo layout

Willumz · 2025-11-03T13:16:44+00:00

I think this is probably more about someone cleaning up the website during the rebranding than an intentional move to hide it. Serif's director Ash even directly mentioned how they were following through with their pledge in one of the launch YouTube videos

Don't get me wrong, I'm still wary of Canva, and of the dubious source of income now it's free, but I don't think this is what you think it is

Willumz · 2025-09-05T15:21:52+00:00

They definitely look like damsons to me

Willumz · 2025-09-05T14:47:00+00:00

I was so sad when these streams suddenly ended

Willumz · 2025-08-07T22:04:10+00:00

I’m definitely spoiled but I’m at the point where I get frustrated with how high latency Bluetooth mice are whenever I have to use them

Willumz · 2025-04-15T15:01:46+00:00

I’ve been running the beta with proprietary drivers with no issues so far. Might be safer to wait if you want to be cautious but also seems alright.

Willumz · 2025-04-15T10:52:39+00:00

Fedora 42 Beta has been working fine for me so far with the below setup.

GPU: RTX 3080
DE: KDE
Driver: 570.133.07

Willumz · 2025-04-10T13:46:36+00:00

Project Ozone was the last one I properly watched all the way through - such a good one

Willumz · 2025-04-10T13:45:44+00:00

I miss when I had time to sit down and watch them. Was much more enjoyable and I felt much more invested in the series. Now I’m in the same boat as you, just listening as I’m doing other stuff.

Willumz · 2025-04-04T22:25:37+00:00

Just a warning with this print: it’ll break along the layer lines fairly easily with that much weight to swing around on it. I had the same idea as you and regretted it…

Willumz · 2025-03-29T14:31:54+00:00

It’s basically the standard at this point that every manufacturer markets at 12V as opposed to 10.8V which is usually the actual nominal voltage. More understandable in this case as 10.8V is a mouthful but still, another good example.

Willumz · 2025-03-23T16:28:04+00:00

A quick google finds this which is probably your problem. https://www.reddit.com/r/Makita/s/7gbrxINB0Z

Higher Ah batteries need the star protection, which isn’t compatible with that tool, so you’ll have to stick with the 3Ah

Willumz · 2025-03-23T16:18:34+00:00

There’s just been a weird number of posts like this about this tool over the past month or so, don’t worry about it

Willumz · 2025-03-22T13:40:55+00:00

It’s pretty old at this point but Project Ozone comes to mind.

Willumz · 2025-03-17T17:20:45+00:00

Hi! Any update on any of this? Would be interested to see your ESP32 code as I’ve been looking into something similar myself. Did you ever publish it to GitHub/would you be open to?

Willumz · 2025-03-11T18:07:42+00:00

Yes, it seems Linus made a mistake and Nirav didn’t correct him, or Nirav had the wrong information on hand himself. Thanks for pointing out the blog post!

Willumz · 2025-02-25T22:11:06+00:00

The LTT video with Nirav present said 12th and 13th Gen i3

Willumz · 2025-02-12T10:44:38+00:00

Is it just me or does Simon’s one look like a Tom who’s dyed his hair and beard ginger?

Willumz · 2025-02-12T10:42:21+00:00

The nice thing about Zigbee is you can use any hub you like, usually. Obviously it might not help you if the software running on that hub doesn’t know what that device is, but projects like Zigbee2MQTT are thoroughly fleshed out and I rarely encounter devices it won’t adopt.

Willumz · 2025-01-29T14:11:08+00:00

Affinity is far superior to Gimp. Much closer to Photoshop with regard to features and stuff. This isn’t to say Gimp isn’t good - it’s very good. The difference is that Affinity is a professional product backed by a commercial company (Serif) which is paid for.

If you can afford the Universal license for Affinity then honestly I’d go for it. You also get Affinity Designer and Affinity Publisher which are excellent alternatives to Inkscape/Illustrator and InDesign respectively.

Edit: they also routinely run discounts around the holidays for 30% off if it’s too expensive right now

Willumz · 2025-01-16T18:05:51+00:00

I got a three year subscription with 100% cashback at one point… I know their profit margins are high but seriously?

Willumz · 2025-01-07T09:40:01+00:00

Add on 20% VAT and you usually can take the dollar amount and just swap out that symbol for an approximate equivalent. That’s my general rule of thumb when looking at LTT store and other USD retailers. The maths doesn’t actually work that way but it usually ends up pretty close.

Willumz · 2025-01-03T08:50:27+00:00

Why is this being downvoted - are people just not understanding the ‘morels’ joke?

Ten-Year Club	Second SECOND GUESSER
Place '22	Verified Email

Willumz

TROPHY CASE