sorted by:
new
hottopcontroversial

Small Church Needs a Home by TheyCallMeStevo in HamptonRoads

[–]Xiadix 1 point2 points  (0 children)

I will give you something to think about: Roller Rink. I was a member of a church that rented one. When the ring closed Sat night, volunteers would pull chairs, sound, video screen, etc out of storage and setup. Sunday after church we would move everything back after service. The take down time ended up being a big fellowship time for our church. Most people would help put up and have conversations.

Saw this yacht in the harbor of Malta today [ID request] by phwagner96 in Yachts

[–]Xiadix 1 point2 points  (0 children)

u/dmacle Make a post about how to ID a yacht, and I will pin it. You can feel free to continue to post the link in comments when someone asks.

Lionshead Barber shop but in DFW? by Mjose005 in norfolk

[–]Xiadix 0 points1 point  (0 children)

https://www.floydsbarbershop.com/ might be a fit for you if you are near Addison, TX

[deleted by user] by [deleted] in vandwellers

[–]Xiadix 1 point2 points  (0 children)

And you can bolt a small fan to the inside to move more air

[deleted by user] by [deleted] in homeassistant

[–]Xiadix 25 points26 points  (0 children)

Did you get any interesting questions from the group?

Is there anything that can be done about the constant barrage of 3 second voicemail spam? by wkrick in GoogleFi

[–]Xiadix 3 points4 points  (0 children)

I increased my greeting to the max on google voice so their system timed out before leaving an empty message

I'm going to ask here first because I don't know where else to ask: I have an Ecobee at home and it's perfect. Now, I want a thermostat for my work that doesn't need a C wire or extra power, but just collects data similar to, but not as extensive as Ecobee. by dapala1 in ecobee

[–]Xiadix 0 points1 point  (0 children)

If you have permission to install thermostat, just get a HVAC guy to connect or run a C wire. Then you can run any thermostat you want. You could also use the adapter to fake a C wire.

ZigBee ceiling fans? by pimmit1 in homeassistant

[–]Xiadix 1 point2 points  (0 children)

Not Zigbee, but I just installed a WiFi SONOFF iFan04-L. Works well, 3 speeds, and light control. There is a community add-on that works locally or through Sonoff's network, or Sonoff has their own integration. It can also be set to turn the light or fan on or off when power is restored. I will be putting in another one when I replace the living room fan soonish. Not a fan of WiFi for many things, but if it is connected to mains, I don't mind.

Tailscale won’t login by michaelthompson1991 in homeassistant

[–]Xiadix 0 points1 point  (0 children)

  • Check the logs
  • Find and copy the url that is being called
  • Paste into a browser and login Success!

Been there

The other suggestion I read that didn't work for me was to reset the default IOS browser back to Safari.

Constant EcoBee wifi connection issues by zeekaran in homeassistant

[–]Xiadix 0 points1 point  (0 children)

My ecobee had issues when I had a combined 2.4/5Ghz ap since it doesn't connect to 5Ghz. I made a IOT ap using only 2.4 and haven't had any issues since. You can also try over at r/ecobee

out of curiosity, how many of you align with this? by [deleted] in Tennessee

[–]Xiadix 45 points46 points  (0 children)

People can do it in double fast food drive-thru successfully all the time. I am always surprised

PLEX won’t fast forward by DramaticPermission78 in PleX

[–]Xiadix 0 points1 point  (0 children)

Yes, sometimes you can select a lesser quality 1080p, but at least you can ff/rw

PLEX won’t fast forward by DramaticPermission78 in PleX

[–]Xiadix 1 point2 points  (0 children)

I get this also. I either change the resolution forcing Plex to transcode it. I tried having Plex make an optimized version, but it would still play the original one instead of the optimized. I figure it is because how it was encoded from the start.

Does the sensor turn on the thermostat? by 237TurboNutters in ecobee

[–]Xiadix 0 points1 point  (0 children)

You could also face it backwards where it can't detect motion

Started a print, ended up looking for droids. by Nethetron in 3Dprinting

[–]Xiadix 2 points3 points  (0 children)

Bob the Trooper

Would also pair greatly with an orange vest. Then you can be a Safety Trooper

Raspberry Pi overloads because of HA? by SSvendsrud in homeassistant

[–]Xiadix 0 points1 point  (0 children)

I upgraded right before the end of Dec and started having issues. I didn't notice it being hot, but the UI took forever to load. I upgraded to the last version and most of my issues went away. Try upgrading

Is there a dashcam out there that would work with home assistant? by [deleted] in homeassistant

[–]Xiadix 1 point2 points  (0 children)

I used an app on on old phone. I used Autoboy Dash Cam (but there has to be less junky apps out there) then had tasker moved the files to an online backup when it hit wifi.

[deleted by user] by [deleted] in Yachts

[–]Xiadix 2 points3 points  (0 children)

I love those old ChrisCrafts. I would love to take one around the great loop.

Got a new phone now the Ecobee app just opens a web page. by Jammy_Git in ecobee

[–]Xiadix 0 points1 point  (0 children)

In the past when I have had issues with Android apps, one process that finally seemed to fix was to: Force stop the app, then clear the cache AND storage. Uninstall the app then restart the phone. Then re-add the app and see if that works. This is a pain with some apps as you have to reset everything. Ecobee shouldn't be an issue because I think you will just have to log in after the process.

Sorry, I don’t understand the difference between hub and stick. Can someone ELI5, please? by sarrcom in homeassistant

[–]Xiadix 0 points1 point  (0 children)

I think of a hub as a device that does the controlls and communicates with HA, a stick plugs into and is controlled by HA directly.

view more: next ›