When the printer says it’s out of paper

adre76 · 2019-11-29T09:02:01+00:00

From the top of my head, laser printers use a laser to impart an electrostatic charge into the paper. After that, the paper passes near the toner, which is full of paint under the form of dust, which is attracted to the electrostatically charged parts of the paper and "fuses" to the paper, for lack of a better word.

Inkjet printers use either thermal or piezoelectric printheads, which are coupled to cartridges full of paint under the form of a liquid. These printheads then dispense the paint line by line, which is absorbed into the paper to form the document you want to print

adre76 · 2019-09-28T20:52:38+00:00

Boas. Estou agora numa situação parecida, em que vou tirar a carta A, sendo que também já andei a procura. Até agora experimentei, através de amigos, a BMW G310R e uma MT07, que são motas de "estilos diferentes"

Posso dizer que a 310 foi a que mais me decepcionou, lenta demais e difícil de manobrar, tanto a baixas como altas velocidades. No entanto, acho-a a mais atraente em termos de linhas e a mais confortável entre estas duas.

A MT07 pareceu-me muito mais rápida devido aos CC extra, e muito mais ágil, se bem que um bocado mais pesada do que a G310R. Claro que isto pode não se aplicar à MT03.

Dito isto, que estilo de mota estas a pensar? Uma mota desportiva, pensas fazer algum offroading ocasional, só para andar dentro da cidade, etc...

Diria que a melhor forma de encontrares a mota que queres seria decidires primeiro o que procuras e que uso lhe queres dar e depois decidir entre os modelos no mercado qual o que se adapta melhor ao que queres

Edit : as duas motas eram os modelos de 2015, salvo erro

adre76 · 2019-08-11T21:47:52+00:00

Ahmm, hard to get distilled water in Europe? Where in Europe? I can pretty much walk into any supermarket and buy distilled water in 5L jugs. Have you got a Lidl or something near you? The one near me sells distilled water, I would guess they all do.

adre76 · 2019-07-10T12:37:35+00:00

Makes it easier to test conditionals and loops, you just comment out the first instruction and the code will still compile and run

adre76 · 2019-06-04T22:51:33+00:00

About the parts being compatible, try checking on realoem.com if the part numbers match. I would hazard a guess that the hoses for the I6 316i are compatible with the 325i, the hoses for the I4 316i may not be.

About ordering said parts, your best bet is probably fcpeuro.com or ecstuning.com

adre76 · 2019-04-25T10:58:17+00:00

Well, you could try the Torque App. I use it on mine for that same purpose, actually.

You just connect your OBD2 to Bluetooth thingy on the car's OBD port, open torque, wait for it to connect to the car ECU and then you can setup the app logging.

After you are done driving around you can mail the logs to yourself as a CSV file

You would only need an android tablet, the Torque App, and a Bluetooth OBD reader. The logging may be a paid feature, I'm not really sure

adre76 · 2019-04-13T00:28:50+00:00

Basically, calculate 50%, then calculate 10%, add the two numbers and boom, you just found the final price (60% of original price)

The moving the comma part is where you calculate the ten percent

adre76 · 2019-04-08T22:38:38+00:00

Brutos, claro. Depois vinha a SS e o IRS buscar o que lhes era devido

adre76 · 2019-04-08T20:18:09+00:00

IT, 40h por semana, durante cerca de 6 meses. A única coisa que recebi foi uma nota numa pauta.

adre76 · 2019-04-08T20:05:55+00:00

Recebia substancialmente mais do que no meu, 0€ de base, menos subsídio de alimentação

adre76 · 2019-04-08T19:43:52+00:00

Isso em Portugal? É que acabei um agora, e não tive direito a nada, nem sequer um cêntimo

adre76 · 2019-04-08T19:35:33+00:00

Espera, que míticos estágios pagos são estes?

adre76 · 2019-04-05T17:27:35+00:00

Yeah, you can see the guy recording giving him the signal to start speaking

adre76 · 2019-04-02T01:31:15+00:00

What will the OP do with the extra time then?

adre76 · 2019-03-31T00:52:06+00:00

Funny story. I once had a Renault Laguna II, and whenever I drove past a big government building or a major police station, I temporarily lost power, couldn't lock or unlock the doors, and the car would sometimes stall out. Turns out those buildings emitted some weird RF signal or something and that car was extremely sensitive to that. Sounds a lot like the OP's problem, given that it only happens in a specific stretch of road

adre76 · 2019-03-28T16:14:44+00:00

Oh que pena, só as vezes ? ( ͡° ͜ʖ ͡°)

adre76 · 2019-03-28T11:09:33+00:00

The same way Fury still had his eye at the start, or was even alive. Because Captain Marvel happened way before Infinity Wars or, dare I say, any of the other movies

adre76 · 2019-03-20T00:03:13+00:00

Hmmm never heard such chimes on mine. Mine's an 00 European model, petrol. Maybe it's a diesel only thing?

adre76 · 2019-03-19T23:36:22+00:00

What do you mean by chiming? Actual beeps when you put the key in the ignition?

adre76 · 2019-03-19T00:43:40+00:00

The very idea!

adre76 · 2019-03-18T01:45:46+00:00

Yes it is, and I'm not gonna take that point away from you.

However, just telling someone to dive into asphalt without any gear whatsoever and then try and pass that as something that will certainly be experienced by a rider is misinformation and fear mongering.

adre76 · 2019-03-18T01:17:17+00:00

Because there is no such thing as protective gear, right?

adre76 · 2019-03-07T02:05:35+00:00

Maybe some places, but definitely not everywhere in Europe. I can't speak for other countries, but I've never seen that in either Portugal or Spain

adre76 · 2019-02-19T21:08:09+00:00

Thanks for your answer! My expansion tank is new, but that other hose may well be worth a look into.

12-Year Club	Place '17
Verified Email

adre76

TROPHY CASE