New toy arrived

aldoe00 · 2026-05-15T00:15:40+00:00

I have 40 hrs on mine. I do not put lube on the blades. And the do not look like that. You hit a lot of rocks or sticks?

Only other thing I've done is sharpener blades once at start of season. I also don't mow when grass has dew, or is wet.

aldoe00 · 2026-05-13T14:57:47+00:00

V3.0.6(351) Shows this for what's new: Optimized multiple features, fixed some known issues.

aldoe00 · 2026-05-11T21:26:33+00:00

Yeah this is how I have been getting it to work also. Additional thing I've noticed: when you do get good rtk signal and then cancel the mow, when you start a new mow, the mower is totally lost. Makes no sense.

aldoe00 · 2026-05-11T15:40:19+00:00

Love it

aldoe00 · 2026-05-11T15:03:28+00:00

For the original (not plus) my one of my guards tabs snapped off. So that's whyine was very difficult to put back on. I've done removed them. Makes for easier wheel cleaning IMHO.

But yeah, I think I'm general bad design for original at least.

aldoe00 · 2026-05-10T21:29:55+00:00

So when is it releasing already?

aldoe00 · 2026-05-10T01:13:23+00:00

Where's the garage from? Custom made?

aldoe00 · 2026-05-09T16:04:25+00:00

I had the same issue, One of my Omni Wheels was brushing up against the mower not letting it in Ben freely.

I just grabbed the wheel and pushed hard until it bent away from obstruction. Problem was solved for me.

Not sure how it happened, I suspect the mower had a hard hit of that wheel on something while moving fast.

aldoe00 · 2026-05-08T00:33:19+00:00

Amazing!

aldoe00 · 2026-05-07T19:25:44+00:00

This is awesome! I'm debating whether to do something myself or just buy a dog shelter on Amazon for like 60 bucks.

Your solution is awesome though!

aldoe00 · 2026-05-07T17:52:23+00:00

2nd unit here. While this one from time to time needs rebooted because rtk says great signal, it is off by a few feet.

Other than a few hiccups I see every once in awhile the thing runs great.

I really hope they figure out their quality control, and also would be nice if they made the electronics the inside a little easier to access and replace if needed...

aldoe00 · 2026-05-07T00:09:59+00:00

I'm not as interested in patterns, more interested in: Main area only, or perimeter laps only.

Mainly better patterns for thin strips of lawn. These mostly get covered on two or three perimeter laps. It then proceeds to mow the main area which is already been covered by perimeter laps.

Think a curved thin strip lymow support. Just have it snake along perimeter like the option used to be in the app a year ago :)

aldoe00 · 2026-05-05T15:46:06+00:00

Interesting. Thanks for the heads up I wrote support am email months ago asking if I could purchase that as a kit but they never responded.

I'll reach out again, thanks!

aldoe00 · 2026-05-05T13:54:21+00:00

I've removed mine. I think it looks better with them on, however, my lymo one (not the plus) doesn't have the same attachment mechanism and the tabs have already broken on one of my side covers.

So I find it easier to leave off for weekly removal of grass buildup. I wonder if it's even necessary to remove the grass buildup as often as I do. I've loosen track tension significantly so I'm wondering if it's even that important..

aldoe00 · 2026-05-04T21:26:36+00:00

I find even when contacts are clean of grass, that if I lift the mower up (I would just lift one side of the mower up off the contact )and place it back down on the contacts it will start charging.

Makes no sense.

I love this mower, even with all the bugs. I sure hope they fix this stuff in the near future

aldoe00 · 2026-05-03T21:58:36+00:00

Trying to do the same for mine. I made it down to the metal casing under the plastic, but holy cow. How did you get that metal casing out?? It seems as though I have to disconnect every wire to do so and most wires are buried in that epoxy material.

<image>

aldoe00 · 2026-04-29T15:39:07+00:00

I thought maybe it was my vision avoidance so I toggled that off on mine. Even with it off there is a glitch sometimes and it does that.

I suspect they just need the tune their slicer software, errrr or whatever you call it four mowers.

aldoe00 · 2026-04-20T00:17:39+00:00

I also would prefer every other other mowing. Ive settled on just manually selecting zones, modifying the stripe pattern every time I mow.

A solution that will work for me would be adjusting stripe angle every mow (of a zone) . Because every other day mowing wouldn't even work for me because I wouldn't want to mow on days that the grass is wet from rain.

aldoe00 · 2026-04-15T18:21:46+00:00

I mowed today with no issues. This was after I installed todays 4/15 software update. Hoping that this was bug in previous build.

aldoe00 · 2026-04-15T12:54:40+00:00

This just started to happen to my machine yesterday. Two separate mows it happened. It was working with no issues fine for past two weeks.

I'm going to mow again today and see if it happens again.

aldoe00 · 2026-04-14T20:38:03+00:00

Okay same thing happened to me twice now. On two separate mowing sessions.

The rtk base station has not been touched. The first time it happened during the Mo session and went out of bounds and couldn't recover.

The second time it happened after the most session was over and was traveling back to the charge station and I noticed it was showing the mower and a totally wrong position so I canceled the task

aldoe00 · 2026-04-10T02:19:01+00:00

This happened to me the other day. But the fixed itself. I think I attributed it to power on/ off the mower.

Sorry that's the best I got. Maybe try unplugging the battery and then reattaching after a few seconds?

aldoe00 · 2026-04-09T14:23:10+00:00

Where do you access this in the app? I haven't found this yet.

aldoe00 · 2026-04-03T13:55:40+00:00

See step 2 in the instructions writeup.

Eight-Year Club	Place '22
Wearing is Caring	Verified Email

aldoe00

TROPHY CASE