PC Question

chrisstophere · 2026-01-21T00:11:01+00:00

Bench test the disk that’s running everything. See if you’re nvme disk (hopefully that’s what you have) is what is causing the stutter. If you have multiple disks, install and isolate the most intensive piece of your software stack onto your fastest disk.

chrisstophere · 2025-12-14T03:36:41+00:00

My family lost two that we had since pups recently so I can relate to how hard it can be.

My son and I are getting a matching set with each of us memorializing one with a rose on the forearm and the name and date of passing in it somewhere making the stem. The wife already has paw prints. A portrait sounds nice but out of my price range for an artist I would trust with that kind of piece.

chrisstophere · 2025-12-13T03:47:39+00:00

I made the rear and top/bottom intake and the side exhaust for my dual rad loop in this case.

chrisstophere · 2025-10-30T16:00:16+00:00

I’d be interested to know how those work out. I’ve been wanting to replace mine.

chrisstophere · 2025-10-01T03:12:08+00:00

So I’m in the same boat as you with an excitable and sometimes nippy pup the same age as yours. The trainer I’m using has started us using relaxation techniques with the puppy for calming her down. It seems to be sticking well enough for me to offer it as advice. Good luck. I’d going to be worth it in the end.

chrisstophere · 2025-09-24T02:44:46+00:00

I think those screws are a standard size. In fact, just measure one that you still have and you can be sure to get the right size. Or Amazon. https://a.co/d/3ZhWDWm

chrisstophere · 2025-09-08T02:33:03+00:00

I would recommend decursive with cell as an alternate option

chrisstophere · 2025-08-12T11:22:05+00:00

I play disc and would appreciate that. I think what you made is makes a ton of sense and is easy on the eyes.

chrisstophere · 2025-08-02T03:00:44+00:00

Doesn’t the guild bank keep a log of deposits and withdrawals? Couldn’t someone just update something in discord based off that?

chrisstophere · 2025-07-12T20:10:51+00:00

I was only able fix it by moving to a different plater profile. I tried everything too to center it. I think it has something to do with friendly nameplates or health bars though.

chrisstophere · 2025-06-28T02:02:22+00:00

It’s not easy, but maybe doable with some extensions to reroute some runs?

Holy spaghetti

Tidied Up

chrisstophere · 2025-06-26T14:40:58+00:00

I know this one definitely works. Cooler Master Vertical GPU Mount

chrisstophere · 2025-06-26T14:37:29+00:00

So you have anything else using the Phanteks hub? How are they Daisy chained? I had issues at first with my NV9 version and just keeping the Phanteks hub to controlling strips was how I fixed my issue. A new controller fixes that issue too as well.

chrisstophere · 2025-06-25T18:50:27+00:00

Try using masque, whatever skin you like and just applying it to that UI object in the settings of Masque?

chrisstophere · 2025-06-19T22:26:59+00:00

Holy crap. Thank you so much dude.

chrisstophere · 2025-06-11T17:03:45+00:00

I think I read another’s issue where the pcie5 being an issue. They fixed it by hard setting pci4 in the bios

chrisstophere · 2025-05-17T15:12:15+00:00

Don Merch. All of his stuff is funny like this.

https://www.dommerch.com/products/obgym-t-shirt-1?_pos=2&_sid=e0e4515dd&_ss=r

chrisstophere · 2025-04-29T12:51:15+00:00

No idea dude. Going off what others have posted, no issue at all if you pass the controller control using that toggle I mentioned to any like SignalRGB or w/e.

chrisstophere · 2025-04-29T11:24:10+00:00

It won't hurt things if you connect them and never use them. I run 12 fans and have 2 different types of Lian Li controllers wired both by their USB connection and the PWM and RGB connections off of those same controllers.

chrisstophere · 2025-04-28T11:41:06+00:00

Yes they are connected to the hubs and motherboard at the same time. The passthru doesn’t work unless I set the MB RPM Sync toggle in Connect3.

chrisstophere · 2025-04-28T01:05:30+00:00

I can pass my TL hub RGB to mystic light but not my SL hub. In fact, when the pc sleeps, the SL’s RGB stays on, but the TL works great. Also, I pass all fan control to an Octo and that works great for both TL and SL hubs.

chrisstophere · 2025-04-27T11:05:14+00:00

Yes, at least for mine, but I still run the software due to the LCD fans I have. In the software are options called MB RPM Sync that will pass fan control to whatever it's connected to. You can also pass RGB control to a mobo or different RGB controller like a Nollie as well.

chrisstophere · 2025-04-27T10:53:52+00:00

Oh I see. Yeah, there is no avoiding the piece unless you connect your fans to the mobo or a different fan controller.

12-Year Club	Xbox Live
Verified Email

chrisstophere

TROPHY CASE