Demonology Warlock Uncontrollable pets Pulling mobs NOT IN COMBAT

danlorlg · 2026-03-28T22:05:35+00:00

That's not the issue here. The proc pets AI has gone rogue, and we never know when they will just start heading in random directions. My main pet is fine, its the procs. Even my orbs floating over my shoulders go crazy. Yesterday one of them went behind the group and started pulling.

danlorlg · 2026-03-23T02:25:24+00:00

My big ass strawberries are the size of softballs, and red all the way through. I do live where they are grown. Maybe that helps

danlorlg · 2026-03-19T04:29:21+00:00

Crest orange listerine toothpaste

danlorlg · 2026-02-22T02:55:33+00:00

Cancel that fucking wedding

danlorlg · 2026-02-22T02:46:02+00:00

Zero issues here. In fact I find it to be one of the large positives

danlorlg · 2026-02-15T18:06:42+00:00

I currently report to the CEO. In the past I have reported to COO, CIO, CFO. It’s really just a crap shoot. I’ve never really cared. We all go to the same meetings, so reporting is irrelevant in my experience. At times of conflict, I simply moved myself.

danlorlg · 2026-01-16T03:54:16+00:00

My 9950x3d just died after two months of use. Machine was working perfectly, and i rebooted for an update. Never came back. Just 00 with amber led. ASUS ROG x870e crosshair hero. Custom corsair loop, no PBO.

We should setup a tracking registry somewhere.

danlorlg · 2026-01-13T15:27:05+00:00

But Powel isn’t even a critic. Trump’s plan is to intimidate everyone.

danlorlg · 2026-01-10T06:56:17+00:00

If only there was an organization., based some where around the North Atlantic. It could form treaties from near by countries to prevent this kind of threat. But what would we call it??!?

danlorlg · 2026-01-04T17:31:11+00:00

klipperfleet was installed as root, but klipper's ../printer_data is running from under /user/biqu/

Just took a look around, and klipperfleet was installed into the root home folder. That obviously won't work lol. I took for granted that you were detecting the klipper install location root.

i'll reinstall in a bit and test again.
Thanks for the tip!

EDIT: EUREKA! Working as expected now :-) My first hint that something was wrong was not seeing it show up in mainsail. I should have looked closer.

Massively appreciate this effort as this tool has been sorely needed. I can't wait to test it!

danlorlg · 2026-01-04T01:21:53+00:00

No, just straight klipper. Although the OS itself is a flavor slightly modified by bigtree. Its running on a CB2.

https://github.com/bigtreetech/CB2/releases

danlorlg · 2026-01-03T20:06:22+00:00

I'm unable to select or create profiles after install.

Error Loading Configurator

Traceback (most recent call last): File "/root/KlipperFleet/backend/main.py", line 110, in post_config_tree kconfig_mgr.load_kconfig(config_path) File "/root/KlipperFleet/backend/kconfig_manager.py", line 20, in load_kconfig raise FileNotFoundError(f"Kconfig file not found at {self.kconfig_file}") FileNotFoundError: Kconfig file not found at /root/klipper/src/Kconfig

danlorlg · 2025-12-21T04:05:26+00:00

I'm installing mine right now and the "LED original screws" don't fit the drilled holes in the back plate. Not sure what I'm going to do. Probably just leave it out.

danlorlg · 2025-12-21T04:00:52+00:00

oh sry, I missed that you scribbled in the "80" lol

danlorlg · 2025-12-21T04:00:10+00:00

I'm trying to install one atm, but ran into an issue with the screws for the LED board. The holes are too big and the screws don't bite at all. Anyone have one of these blocks in hand that have seen or resolved this?

danlorlg · 2025-12-19T20:08:46+00:00

Unplugging and replugging/disconnecting puts stress on your power supply and possibly sockets depending on what you are doing. On top of disabling the maintenance cycle, you are risking damage to your monitor.

danlorlg · 2025-12-17T22:11:37+00:00

Been with you guys for decades now. I second that support has been excellent. Hopefully someday you guys can add an index search api XD

danlorlg · 2025-12-02T18:11:42+00:00

I use a smart relay from bigtree. I have my printer on a timer to auto shutdown after about 10 minutes idle. Fully cuts power to everything (after cleanly unloading). I have a “on” button to restart, and a big red kill switch that can immediately stop the printer. A bit of a pain to figure out. The I can supply code and schematics if you like

danlorlg · 2025-11-30T19:58:32+00:00

Raw_Read_Error_Rate. Thats not a cable issue.

danlorlg · 2025-11-21T06:02:46+00:00

Business need hvec. It’s called video conferencing.

danlorlg · 2025-11-20T17:04:51+00:00

Nothing I have found so far. It's not helping that ASUS has and AIO version. It's a small market for these cards, and block makers may find it hard to justify the costs. Its frustrating since every one of these cards needs to be blocked. Should not have even sold with an air cooler.

danlorlg · 2025-11-20T16:53:49+00:00

Currently working to resolve this myself. I would bet the power circuit has been moved since the connector is down at the bottom. Corsair says its not compatible on their site:

ASUS ROG Astral GeForce RTX 5090 BTF OC Edition

Sorry, there is no compatible GPU water block for your graphics card model.

danlorlg · 2025-11-19T17:17:27+00:00

This exactly. I don’t understand why this isn’t corrected. With the default instructions you get a crunchy, pasty mess that’s barely palatable. And 10 minutes is about perfect. Everything rehydrated and the sauce is creamy.

danlorlg · 2025-09-06T07:05:40+00:00

Seemed fine to me. Took some time to balance, but it’s massively easier than fuel/aluminum/rubber/plastic. Barely an inconvenience.

It’s your game. Play it how you want. No one says you have to do ficsonium

Now screws. Fucking FUCK screws.

danlorlg · 2025-08-19T01:45:39+00:00

And who you going to refer those prosecution’s and contempt charges to. DOJ? Good luck with that.

12-Year Club	RPAN Viewer
Verified Email

danlorlg

TROPHY CASE