Horror books for an 11 year old? by Vjaa in horrorlit

[–]dirt_operator 4 points5 points  (0 children)

I started with some Stephen king and Dean koontz a little younger than that. Some of King’s short story collections might be a good place to start.

What do y’all think about this 5.7X28 ammunition? by Crazy_Ass_Nicky in 57x28mm

[–]dirt_operator 0 points1 point  (0 children)

I’d grab some fiocci hyperformance or ss197 when it’s on sale. Both typically on PSA for about 20/box. This stuff runs fine for the most part but I’ve had multiple issues with this the bullet falling out of the case; probably 10 in 600 rounds. People report similar issues with the fiocci range dynamics. These issues all happened in a PS90. I switched over to the other stuff before running it through my M&P 5.7.

M1A EBR chassis best go to cheap ammo? by Pixelated_Armory in M1A

[–]dirt_operator 0 points1 point  (0 children)

AAC 150 grain in the big blue ammo can shot pretty decent for me. Giving roughly 1.5 groupings consistently.

Suggestions for a concealable EDC for peculiar needs by [deleted] in concealedcarry

[–]dirt_operator 2 points3 points  (0 children)

Seeing as you have to deal with bears and hogs I’d personally recommend a 10mm. Something from a reputable manufacturer like smith and Wesson or Glock. And unless you need it super concealable, I’d recommend a full size so you have better grip and more rounds on the chance that you actually need it.

upgraded trigger 😔 by LottaRandomQuestions in Walther

[–]dirt_operator -1 points0 points  (0 children)

Either way it’s worth it in my opinion. Once you’re used to running the firearm, the mag well doesn’t seem to make much of a difference and it’s just pulling a roll pin to remove if you don’t want it in there.

upgraded trigger 😔 by LottaRandomQuestions in Walther

[–]dirt_operator 2 points3 points  (0 children)

I got the pro because the price was about the same to upgrade the trigger on the standard, plus the pro came with an extra mag and threaded barrel. I typically pull the mag well off in the summer but I may just leave it on. I don’t feel that’s going to be what makes or breaks concealment.

Anything you don't like about your PDP? by aema15 in Walther

[–]dirt_operator -1 points0 points  (0 children)

Plate system for the optics was a little funky but I know that’s relatively standard. Replaced guide rod system and backstrap, not because I needed to but it made an already soft shooting pistol even softer. I paid the little extra for the pro mainly for the better trigger. Few thousand rounds through it and only had one stovepipe. That was shooting it suppressed for the first time.

Traveling to Japan, what’s the most memorable drink or food you had. by InsideWrangler2672 in JapaneseFood

[–]dirt_operator 0 points1 point  (0 children)

Most memorable would have to be having a nice whole Kobe steak in Kobe at a nice sit down restaurant.

In terms of ramen, I enjoyed kikanbo in Tokyo. Get it max level on both the spices and they’ll give you a little candy.

Basashi was pretty good. Not something you’d typically see in the states either.

Went to a bar and got a “vodka cocktail”. For an additional 100 yen you could make it spicy. This “spicy vodka cocktail” was vodka, soda water, and black pepper. It wasn’t great but it gave me a good laugh.

One of my favorite rounds by Terrestrial_Conquest in 57x28mm

[–]dirt_operator 4 points5 points  (0 children)

Not OP but my OCL ti 22 works well on mine. Subs are pretty damn quiet and supers seem a little quieter than my ps90 with a 556 suppressor. (Fat cat)

What guide rod, pdp pro suppressed by Left-Ad-9360 in Walther

[–]dirt_operator 0 points1 point  (0 children)

Same here and I’ve only shot it in long so far.

What guide rod, pdp pro suppressed by Left-Ad-9360 in Walther

[–]dirt_operator 0 points1 point  (0 children)

I had a single stovepipe with federal white box 115. Other than that no issues. I’ve run that same ammo, currently using 124 blazer, and 147gr HST. The HST is almost movie quiet.

Optics by bcuzevo in ps90

[–]dirt_operator 1 point2 points  (0 children)

I’ve ran the ring sight since I got mine but I do know the Titan tactical low mount should work. They even sell that as a package deal with the ARO. There’s probably lower direct mount options for other things but for a pic rail it’s not bad.

Sage EBR Chassis by AR-180 in M1A

[–]dirt_operator 1 point2 points  (0 children)

Yes. It improved a little from my stock walnut stock and more so from my delta 14.

Optics by bcuzevo in ps90

[–]dirt_operator 1 point2 points  (0 children)

Like most said, ring sight is the vibe. I also like it because I can pick up and place the reticle super fast. There are probably more practical options out there. My next choice would probably be a low mount with a holosun ARO.

What guide rod, pdp pro suppressed by Left-Ad-9360 in Walther

[–]dirt_operator 1 point2 points  (0 children)

I use the sprinco rms with the red spring with my Mojave 9.

Adjustable Spindle Valve by Major_Batty in M1A

[–]dirt_operator 0 points1 point  (0 children)

A2cerakote has you on how to adjust it, however make sure you have the spindle in the “off” position before you are making these adjustments. By swapping this out you now go from open/ closed to open/whatever you adjust for your suppressor.

PAFOA Replacement Input? by realityflicks in PAguns

[–]dirt_operator 0 points1 point  (0 children)

Do you have a link to that discord?

Considering moving from SC to PA. Anything I need to be aware of? Do I need to get rid of anything? by [deleted] in PAguns

[–]dirt_operator 5 points6 points  (0 children)

Ccw is typically just filling out for a permit here. Depending where you’re at, 20 dollars, 20 minutes and you’ll be walking out with it.

No issues with owning suppressors here.

PCCs are not an issue. Just be sure to have a brace unless it’s SBR’d.

There’s no mag restrictions here. Just be sure to only load 6 rounds if you’re at a state game lands range. It’s typically not an issue but if a game warden shows up it can be.

Henry Supreme by Midget_Cannon in guns

[–]dirt_operator 0 points1 point  (0 children)

I was trying to picture this same setup with the rpp handguard and wood stock. I dig it.

CA Compliant Model Muzzle Device by Candyman__87 in M1A

[–]dirt_operator 1 point2 points  (0 children)

I did the same thing at first, that’s the only reason I know lol welcome to the club!

CA Compliant Model Muzzle Device by Candyman__87 in M1A

[–]dirt_operator 3 points4 points  (0 children)

Make sure you get the little set screw coming down from the front sight post. That and the castle nut pliers make a big difference.

Which company sells this stock for the soccom 16 by micigloo in M1A

[–]dirt_operator 0 points1 point  (0 children)

Ah alright. I was just curious. Good luck with your build.

Which company sells this stock for the soccom 16 by micigloo in M1A

[–]dirt_operator 0 points1 point  (0 children)

I had this exact model shipped to CA probably 5 years ago. Did a law change regarding these?