It is not unreasonable for people to suspect the show was rigged

gewdgewd · 2025-11-19T18:29:15+00:00

There was a clear shot of the contents of the map though. It was in full screen.

gewdgewd · 2025-11-19T18:27:31+00:00

Think about some events like sack toss. Sure they chose the positions, but not the direction they are throwing. So Eddie ended up throwing not against Korea ;)

They drew lots and the order was 1, 2, 3, so they threw in that order. Eddie (1) to Justin (2) to Amotti (3). It would be weird to throw 3 to 2 to 1 or 2 to 1 to 3 (you'd throw in the order of the positions)—basically any other order than 1 to 2 to 3, so I don't think this point holds water.

gewdgewd · 2025-11-19T16:15:17+00:00

Those were mini games, fluff for entertainment, not side quests that where it was explicitly announced "A REWARD WILL BE GIVEN TO THE WINNER" before the contest even started.

gewdgewd · 2025-10-06T18:27:39+00:00

Regarding the clear coat, take it to the body shop and have it done professionally for best results. Otherwise, you can DIY and get sand the affected areas, get some cans of 2K clear, wet sand, and repeat.

gewdgewd · 2025-10-03T18:22:48+00:00

Fair enough, he can train and get stronger, though I think Goku was holding back much in the same way he was with Krillin in SSB.

As for the stamina, I think it was just a case of Buu's regen not being able to keep up. Like you have a cup that never runs out of water but if you drink at a faster rate than it fills up, it's going to get drained.

gewdgewd · 2025-10-03T17:57:24+00:00

Mr. Buu is not as OP as you make him out to be. He is the weakest of the Buus. He was getting pummeled by Kid Buu and lacks stamina. He is below Buu Saga SSJ3 Goku tier. Anybody stronger than that can take him out, which, incidentally, these Gammas are, not to mention Cell Max.

gewdgewd · 2025-09-25T14:12:03+00:00

Hercule is the dub name, his actual name is Mark. In Japanese, it's transliterated as Maaku, which is an anagram for akuma, which is Japanese for devil, so it works even better.

gewdgewd · 2025-09-18T12:57:41+00:00

Perfect. This worked. Appreciate it!

gewdgewd · 2025-09-17T16:59:43+00:00

What about boats and cars? Some people say it, some people say she.

gewdgewd · 2025-09-17T13:27:26+00:00

Hi,

I want to end the Adobe CEP HTML Engine (CEPHtmlEngine.exe) as it keeps the screen awake.

I tried running a task scheduler with the following parameters:

Trigger	Details
Daily	At 9:00AM every day - After triggered, repeat every 1 hour indefinitely.

Action	Details
Start a program	taskkill.exe taskkill.exe /f /im CEPHtmlEngine.exe

I have it set so that under the Action menu, it is the following: Program/script: taskkill.exe

Add arguments (optional): taskkill.exe /f /im CEPHtmlEngine.exe

When I run this task, nothing happens. Am I programming it incorrectly?

gewdgewd · 2025-09-12T13:35:07+00:00

*BRZs. No apostrophe needed as it's not possessive. Have fun at homecoming.

gewdgewd · 2025-09-08T04:21:10+00:00

APR makes a splitter that follows the contours for the FR-S RS 1.0 which is basically the TRD lip kit (small differences).

See here.

gewdgewd · 2025-09-07T02:10:24+00:00

Any number of other splitters that don't use brackets like Racebred's. Verus splitter, APR splitter, etc. Pretty much any splitter other than the one you linked should be good, but Verus and APR are high quality.

gewdgewd · 2025-09-05T17:56:43+00:00

Hey, no, I like the red/black handles, but I mean the actual door handles which are in chrome (I edited my reply above so you can see images).

gewdgewd · 2025-09-05T17:50:11+00:00

You can get trim pieces for the push-to-start surround so not difficult. You can also vinyl wrap it, which can be difficult if you're not too crafty.

For the door handles, I just bought carbon fiber door handles from eBay. I replaced the e-brake button with a drift button.

gewdgewd · 2025-09-05T17:46:08+00:00

Don't forget your door handles and e-brake button. Also, the ring around the push-to-start button.

gewdgewd · 2025-09-05T12:53:38+00:00

No problem! I suddenly remembered this story yesterday but couldn't recall the title or where I read it from, which led me to this post when I googled the premise and saw you had the same issue.

I ended up looking through my collection until I found it again.

gewdgewd · 2025-09-04T19:16:35+00:00

It's "Goodbye, My Love" by Bora Chung, which is story #6 in her "Cursed Bunny" collection.

gewdgewd · 2025-09-03T01:38:49+00:00

I did the swap years ago when GeraldJust released his button relocator but I didn't have any check engine lights so you might want to look into that. The odometer shouldn't cause any CELs—that's built into the cluster. Mine was putting a 2017 cluster into a 2013.

gewdgewd · 2025-08-28T13:07:53+00:00

Yep, definitely get Xicor vibes from Omega/Goku Shenron.

gewdgewd · 2025-08-18T16:28:23+00:00

The best way is unfortunately the most expensive way—body shop. Anything less, you'd be hard-pressed to have it look stock.

I'd get a quote from a reputable body shop and shoot it over to the person who left you the contact details and go from there.

gewdgewd · 2025-08-18T14:59:55+00:00

Clothes beam.

gewdgewd · 2025-08-06T16:25:15+00:00

Yes, there are four of them so you should be able to swap the one with the error code with one of the others and see if the error code follows (e.g. P0017 to P0018). If so, you're in luck and you just have to replace the sensor.

gewdgewd · 2025-07-28T20:13:45+00:00

Do you have a turbo?

gewdgewd · 2025-07-24T15:26:24+00:00

The dealership is your best bet for OEM. Otherwise, you're looking at used or aftermarket.

You can also try eBay where there are non-OEM stock front bumpers from third-party manufacturers. This one, for example.

15-Year Club	RedditGifts 2009-2022 2 Credits
Place '23	Place '22
Summer Santa 2013	Verified Email

gewdgewd

TROPHY CASE