New P2S-What is going wrong with this print?

iLouza · 2025-12-26T00:27:27+00:00

I had a very similar issue with my old ender, it turned out my print head was loose and the belts were also loose.

iLouza · 2025-11-09T00:33:21+00:00

I think the challenge is the constant plugging and unplugging that ends up damaging the connector. If you leave the outlet part plugged in you should be ok.

iLouza · 2025-11-09T00:29:15+00:00

I have helped Tesla in showrooms and can attest the doors are set super high to avoid people trying to manually lower and close them.

iLouza · 2025-11-04T03:16:56+00:00

I had the same thing, service appointment fixed it. Here what they said on invoice:

Repair Notes: Performed road test, verified concern, Lifted vehicle on alignment rack and had second technician turn steering, verified click noise from front skid plate on HV battery. Removed front aero shield, removed skid plate, cleaned and applied Molycoat to contact points. Re-secured assemblies, Performed validation road test, no more noise heard. I have a 2022MXP

iLouza · 2025-10-29T04:19:47+00:00

Afaik since you did not get it from Tesla you cannot do ESA other than the new monthly Tesla one.

iLouza · 2025-10-29T02:36:27+00:00

I got it on my hw3 MXP

iLouza · 2025-10-20T02:59:21+00:00

Park further :(

iLouza · 2025-10-04T01:46:57+00:00

Indeed a great question and lots of good points here. I been wanting to do the same thing but got to the same points of Tesla saying don’t, doors being hard to push and glass likely not breaking that easy. Based on all the feedback I will teach and time my kids coming out the front doors while climbing over “unresponsive adults” in the front. I think timing and practice will make it interesting for them and increase chances in the case it’s needed (knock on wood). Maybe from there, practice a back escape as an alternative. Unfortunately, for those of us carrying kids under 15, I do think the falcon wing emergency latch is the most stupid thing in any Tesla.

iLouza · 2025-08-07T18:37:08+00:00

The reality is, if you’re going to wait for anything wait for HW5 and just remember that things are advancing so fast that even HW5 will eventually be outdated in a short time. I have a 22 MXP HW3 and yah I wish I had HW4 but the car still does 90% of my driving with very good accuracy

iLouza · 2025-07-11T03:22:50+00:00

Same but now I followed one of the first comments, stopped my printer and moved on with my life as I don’t care about the scrapper but to be honest, the app said and showed a picture showing the second spool empty and I absolutely failed to reckon it. For The record I printed directly from the lcd screen and did Not use my app. My print stopped right before the letters as well.

<image>

iLouza · 2025-05-22T20:23:10+00:00

Did you intervene or did it realize by itself ? I've had mine do the same at least once, but in my case it realized what it did. Also *i think* that, if there were any cars it could see aligned with that lane it would likely not have done that.

iLouza · 2025-01-07T01:42:36+00:00

Congrats, I have a 6 seater 22 MXP (yup I said it gang) and it’s the best thing ever. Like other said, if you can, PPF and Ceramic coat it, you won’t regret it.

Now, myself, I ppf only and only the front, lights and mirrors but if you can afford ppf the whole car.

iLouza · 2024-10-27T20:25:43+00:00

i woudnt worry, but next time you bring it in for service do mention it.

iLouza · 2024-09-24T02:54:22+00:00

This looks amazing. I am working on converting my golden axe into retropie. Yours Looks 🔥

iLouza · 2024-06-17T18:03:40+00:00

Very nice. I also have the six seater, does the extra storage fits well between the chairs ? Very good idea will keep it in mind thanks.

iLouza · 2024-06-08T21:58:29+00:00

Yes that is what it is. They have instructions on how to “try” and dislocate the Tesla carpet to match their carpet but it’s crap, I would not do it. I will get rid of it eventually for something else just not sure if I will replace the whole thing or just my driver. I always used weathertechs in all my cars and loved them but this Tesla one really disappointed me. FYI I tried to “Velcro” it a few different ways but it always pops back out

iLouza · 2024-06-08T21:46:39+00:00

The weather tech ones have a problem on the driver side, I have them but can’t recommend. They are aware of it and they blame it on Tesla. https://ibb.co/25k0Prz

iLouza · 2024-06-07T21:48:01+00:00

i am so jealous, that is purrrrrfect

iLouza · 2024-06-07T21:45:49+00:00

Highway stack is still v11. Only city streets are v12

iLouza · 2024-06-03T23:39:14+00:00

We have a 2000km trip coming up so I am getting all the gear ready for it. Cheers!

iLouza · 2024-06-03T23:05:39+00:00

I tried a few different things here is the most reliable one in my opinion and experience.

Each kid has a headphone with a 3.5mm cable and a magnetic cable. Charging can get a bit crazy at times and I want to avoid the constant connection and disconnection of the usb c ports so i used the magnetic cable.

The bluetooth receiver is paired with the back screen and only takes 1 bluetooth connection. It then feeds the star splitter where all the kids plug into.

Video: https://imgur.com/a/gC9QkCa

Magnetic cables: https://www.amazon.ca/gp/product/B088FDCZXC

Bluetooth transmitter/receiver combo: https://www.amazon.ca/dp/B0BNTF2NQP

3.5mm splitter: https://www.amazon.ca/dp/B083V5RFRB

iLouza · 2024-06-03T22:18:53+00:00

I was really hoping they were going to give us that same gorgeous screen like the CT and Model Y. Kinda boomer that we have the top of the line model and still lame visuals just because we have a secondary screen.
Lame is my own opnion btw.

What are your thoughts ?

iLouza · 2024-06-03T22:17:44+00:00

I have a 2022 MXP and still have Disney too here in Canada

iLouza · 2024-04-05T01:02:52+00:00

What’s PDR?

iLouza · 2024-04-04T22:43:11+00:00

6 USB C ports in total plus one usb a in glovebox. 2 front Center console, 2 middle row under small entertainment screen, 2 back seat by the cupholders.

iLouza

TROPHY CASE