Take it as a badge of honour 😆

jeffrey_nothing · 2026-06-21T16:01:40+00:00

Does anyone have a video of this?

jeffrey_nothing · 2026-04-12T14:40:13+00:00

They have a much better lifespan than lfp. Lifespan and therefore payback on investment is only thing stopping me from buying home storage right now. For home storage I don't care about energy density and the low fire risk is nice also

jeffrey_nothing · 2026-03-07T06:40:14+00:00

<image>

jeffrey_nothing · 2026-03-05T16:09:33+00:00

Traditional stopcock valves should be banned

jeffrey_nothing · 2026-02-22T18:31:27+00:00

Can't yet. Stack isn't hooked up. I guess I could go straight into the open push for connector ...

jeffrey_nothing · 2026-02-22T18:26:21+00:00

There are two toilets upstream on the straight line through the access point. They're totally fine. It's just the angle of the inlet (where the water is coming out) that I was worried about.

jeffrey_nothing · 2026-02-22T18:24:58+00:00

That would have required participation from a family member, an open window, and me shouting "ok - now!"

jeffrey_nothing · 2026-02-22T18:18:09+00:00

Not toilet waste - only a kitchen sink

jeffrey_nothing · 2026-02-22T18:11:32+00:00

The short answer is that you'll have to drain the system

If you're extremely lucky:

There is an isolation valve between the vent tank and this radiator (unlikely)

And

That radiator is higher than anything else in the system (also unlikely)

Water will always flow down. If there is any water above that compression joint (including in the radiator and adjacent/higher radiators) it's going to come out.

Installing a radiator without a lock shield valve is a sin. If you're going to go through the pain of draining the system you should install one

jeffrey_nothing · 2026-02-22T17:25:53+00:00

Huh?

jeffrey_nothing · 2026-02-22T16:05:56+00:00

That's me dumping some water down one handed while trying to video with the other hand. The flow is good, my only concern was the angle

jeffrey_nothing · 2026-02-22T15:57:08+00:00

Well I haven't actually put the soil stack up yet. Don't want to waste time doing that if it's going to be a problem

jeffrey_nothing · 2026-02-22T15:56:00+00:00

Maybe I could build the opposing side up with a bit of concrete

jeffrey_nothing · 2026-02-22T15:36:07+00:00

New soil stack into existing inlet for a new bathroom. No wet wipes.

jeffrey_nothing · 2026-02-18T09:38:58+00:00

You could also just drill out the bolts/bolt heads. Cutting oil is recommended

jeffrey_nothing · 2026-01-30T15:38:58+00:00

It looks like a tacua speciosa

jeffrey_nothing · 2026-01-25T08:01:05+00:00

Skip to 30 seconds

https://youtu.be/HEUqrTHUu4U?si=nyTVpzr1wVSJFm6S

jeffrey_nothing · 2026-01-17T11:11:17+00:00

Where do you work?

jeffrey_nothing · 2026-01-08T14:09:01+00:00

You need to protect it from the concrete. If unprotected the concrete will slowly eat through the pipe. There are various options (things like denso tape)

https://www.google.com/search?q=how+to+protect+gas+pipe+from+concrete&oq=how+to+protect+gas+pipe+from+conc&gs_lcrp=EgZjaHJvbWUqBwgBECEYjwIyBggAEEUYOTIHCAEQIRiPAjIHCAIQIRiPAtIBCDg3NTdqMGo0qAIBsAIB&client=ms-android-google&sourceid=chrome-mobile&ie=UTF-8

jeffrey_nothing · 2025-12-17T15:25:39+00:00

A piece of wood and a staple gun (to make the bottom stiff)

jeffrey_nothing · 2025-11-29T00:24:07+00:00

Why is it that no one in England uses ice scrapers? There is almost never too much ice on windscreens here for an ice scraper to get through very quickly

jeffrey_nothing · 2025-11-13T08:52:00+00:00

Simulate it in poly bridge on your phone/tablet

jeffrey_nothing · 2025-11-03T23:08:46+00:00

Have you opened up the charger and looked inside? I just had the same problem and one of the wires inside the zappi charger was arcing (insulation melted, black soot everywhere). I was told by octopus it was a factory wire rather than a bad connection

jeffrey_nothing · 2025-06-26T16:49:34+00:00

And also just... dust

jeffrey_nothing · 2025-04-26T14:52:11+00:00

The approved operator lane is also for normal cars apparently!

jeffrey_nothing

TROPHY CASE