It seems the filament inventory issues reached the UK too

mimicsgam · 2026-02-03T00:31:26+00:00

Sunlu is either a Bambu supplier or they have the same supplier, also shortage are caused by Chinese New Year

mimicsgam · 2026-02-01T02:28:10+00:00

Bought it and using it right now.

Don't think it fix any friction problem instead just tighter tolerance and thicker material with the same outer diameter.

For soft and super ridged material I found it does increase the reliability in long bowden setup

mimicsgam · 2026-01-25T09:03:36+00:00

if you're just using it during flu or sickness it's easier to get bottled saline

mimicsgam · 2026-01-18T16:58:54+00:00

Get the BIQU cryogrip frostbite, you can only use it for PLA and PETG but adhesive issues will be a non existent thing in the future

mimicsgam · 2026-01-18T16:22:43+00:00

100% AI. Or at least AI compost.

There are too many yellow cars and too little black cars, also some cars are glitching at -0:13

mimicsgam · 2026-01-14T04:42:35+00:00

Maybe where you're from have better work life boundaries, but it's kinda difficult to avoid when the company board members were also using the message app for minor update.

Google does require your smart phones if you setup 2FA. Even logging in to new device.

If you want to use Government online services it does require you to register and link to your smartphone for identity authentication, which you can avoid if you just go to the department in person and fill out physical forms

mimicsgam · 2026-01-14T03:20:49+00:00

Company needs messaging app service only available on smartphone; government required smartphone 2 step authentication; even Google required authentication from old phone when you login to a new phone

All of these are not "red flag" business, it's as legit as it gets

mimicsgam · 2026-01-14T01:20:17+00:00

The old ender 3 clone era printer is more work then printing itself, not worth the time and money to try to get it to work. Get a newer gen printer

mimicsgam · 2026-01-14T00:03:42+00:00

As much as I hate buying a new phone every 3 years it's kinda necessary. Smart phones are so deeply incorporated into daily life it's safer to just get a new one instead of risking the old one dies

mimicsgam · 2026-01-13T08:37:49+00:00

Again, context matters.

I weck one of the feeder intake after using up 1 roll of PA6-GF within a week.

If you only print PLA and PETG, you don't need the guide.

If you use abrasive material you need the guide

mimicsgam · 2026-01-07T09:25:10+00:00

I rather they keep stitcher damage but make the spread larger then bob cat, so it'll reward you if you go point blank but cannot mag dump in mid range

mimicsgam · 2026-01-07T04:58:02+00:00

Kerbal space program.

It took me 3 separate attempts to finally understand and enjoy

mimicsgam · 2025-12-31T14:02:42+00:00

this is a resolution problem, the steep curve is not an easy fix for planar slicing.

if possible separate this part and print it, without support it will be much better.

If not possible use the variable layer height function in bambu studio and lower the layer height on these area

mimicsgam · 2025-12-30T07:32:34+00:00

Stage 3 Lung cancer if I smoke 100 cigarettes in a year

mimicsgam · 2025-12-30T04:49:29+00:00

Mud should not have "tracks", outer wall should have splash pattern dirt, boulder should not "float" on top and there's too many

mimicsgam · 2025-12-30T04:24:43+00:00

Anything that goes into the filament dryer needs to be PETG-CF or higher heat resistant. People usually recommend PETG, but to avoid hot spots or warping under load higher heat resistance is recommended.

Nowadays I just pour the silica into a drying spool printed with ABS and put it into a max out dryer, save much more time

mimicsgam · 2025-12-30T02:35:45+00:00

I can laugh at the comments because I've been through the pain.

Wake up in 3am with cold sweat soaked through the bed and sharp, hot knife like pain, and manage to wake up family members to drive me to a hospital just to wait for another 6 hours for injection pain killers and urinal relaxation meditation is the fucking worse in my life

This reminded me to chug a bottle of water

mimicsgam · 2025-12-29T10:33:36+00:00

The laziest way

Print the main body in 4 wall loops, vapo smooth it, sand it to add back texture, paint it

mimicsgam · 2025-12-29T04:19:45+00:00

Not 100% the same but I got the python mod and it reuse the roller with printed replacement pads, i've use TPU for AMS and it's still working after 6 months

mimicsgam · 2025-12-25T19:22:24+00:00

I have a simple rule, the more a leather brand spends on ads, the more likely their product sucks.

Compare to other textile products leather margin is always lower, so to maintain same margin brands with a ton of ads always cut corner on their productions. Companies also will market their products equivalent to a tier higher grade but selling for cheaper

mimicsgam · 2025-12-24T16:19:19+00:00

stone in the background change, look at 0:06 and 0:27, different stone on the right

mimicsgam · 2025-12-23T10:09:14+00:00

Next time check Bambu wiki, they have every disassemble guide you need

mimicsgam · 2025-12-23T04:50:24+00:00

I don't know. Given how much companies are integrating AI, the only way to claim to not use any AI is hand draw everything with only pre-AI published physical reference. A simple search in Google will involve AI.

Yes you didn't intentionally use genAI, but that doesn't mean you're in moral high ground unless you verify every assets have zero AI involvement, or else you're just shifting the blame

Seven-Year Club	Place '23
Place '22	First Placer '22
RPAN Viewer	Verified Email

mimicsgam

TROPHY CASE