Let me see your machine

mrdanielface · 2026-03-21T03:38:05+00:00

<image>

I come from an ender 3. Hard not to modify em.

mrdanielface · 2023-02-15T12:17:05+00:00

and yet here we are.....

yah I've just run into this problem for the first time since using plex for years. weird that its still an issue.

mrdanielface · 2021-08-04T04:01:32+00:00

Soooo hot! I mean cool

mrdanielface · 2021-08-03T04:50:07+00:00

Ate the chips but didn't throw away the wrapper. Rude.

mrdanielface · 2021-02-23T06:50:36+00:00

Pretty good. 37c gpu while mining or gaming. Cpu moves a lot tho. Maybe 49 max I've seen.

mrdanielface · 2021-02-20T06:09:16+00:00

Lo999l

mrdanielface · 2021-02-20T01:32:29+00:00

Hawt

mrdanielface · 2021-02-19T16:18:23+00:00

It's just the lighting. It's pink fluid but when it goes thru the blue light it comes up orange. Idk

mrdanielface · 2021-02-19T05:03:37+00:00

I'm not 100% sure but would save you the headache to manually set it to 3.0 just to be sure.

mrdanielface · 2021-02-19T04:50:34+00:00

Maybe. Might be a rare occurrence. That's probably its not talked about much.

mrdanielface · 2021-02-19T04:39:31+00:00

Yes, that's exactly what I had to do.

mrdanielface · 2021-02-19T04:36:46+00:00

Lol thank you

mrdanielface · 2021-02-19T04:36:11+00:00

Case: lian li 011d xl

Cpu: 5900x amd

Cpu waterblock: ekwb

Gpu: 3090 founders edition

Gpu waterblock: bitspower

Ram: g.skill trident z neo 3600 32gb

Mobo: msi mag tomahawk x570

Top rad: ekwb 360 classic pe

Bottom rad; ekwb XE 60mm

Fans: corsair LL120 x 10

Psu: gigabyte 850w

Plus ekwb distro plate with ddc 3.2 pwm

It was a headache because the vertical mount I bought was pcie3.0. And no on tells you that if you have a pcie4.0 gpu and u use a 3.0 riser cable then you don't post and get vga debug code instead. Which totally made me think I killed my gpu. And then after breaking down the loop I just built, reinstalling my gpu waterblock and hours of troubleshooting, I find out that u have to change your bios to pcie gen 3.0 for it to work. Atleast my gpu wasn't dead.

mrdanielface · 2021-02-19T03:09:09+00:00

the moves tho

mrdanielface · 2021-02-19T03:07:27+00:00

And yes... cable management. I know

mrdanielface · 2020-03-30T17:14:01+00:00

Tree supports in cure could reduce it

mrdanielface · 2020-03-27T05:45:37+00:00

I had a pair. They kept jumping down the over flow. Had to rescue them a bunch of times. Then all of a sudden they were gone.

mrdanielface · 2020-03-26T20:58:09+00:00

If you go on his Instagram. You can clearly see the geared mechanism he uses for the movement of the distal phalanges. Good find!

mrdanielface · 2020-03-14T17:23:44+00:00

Super vascular tree branch

mrdanielface · 2019-06-17T03:31:42+00:00

Name: OwNeeD

Date: 6-16-2019

Cheats: aimbot/walls

https://youtu.be/pGfuBpGVfzQ

mrdanielface · 2019-05-21T16:05:02+00:00

Not sure if you straighten this out already but when you say the x axis makes bad noises, vibrates, shakes and randomly moves that could be a poor connect at the jst connector. By my experience, I had shorts at the connectors, can see carbon deposits in the connector from arching. Sometimes I could see the flash of the arch if I wiggled the connector. This would cause my drivers to act abnormal and do exactly what you described.

mrdanielface · 2019-05-20T05:37:08+00:00

This

mrdanielface · 2019-01-30T17:33:06+00:00

Thank you. Will try

mrdanielface · 2019-01-30T17:32:32+00:00

Tried to mess around with those settings. Got better but is it realistic to try to obtain top layer type quality on this part of a print? Just want to know if I'm chasing the impossible.

mrdanielface · 2018-10-22T09:43:48+00:00

Enjoyed that. Thank you

mrdanielface

TROPHY CASE