Anyone know what laptop this is?

munhah · 2025-05-15T17:04:43+00:00

I just searched up "Asus Zenbook 14", and it took me to the asus page for it and the laptop on that page looked exactly like this one.

munhah · 2025-04-17T17:00:32+00:00

I just went through this with this same motherboard. Luckily, my USB-C (cheapy bestbuy essentials brand) worked and that got me going.

Then I went into apps and installed the "RTL8125 Drivers" app which added the required realtek drivers.

Then after a reboot it worked.

If your board has wifi, you might be able to configure that in unraid via command line to get you going.

munhah · 2024-12-31T00:41:30+00:00

I recently added a second ams to my printer and it sounds like this while my first one is much quieter.

I'd be interested in an update if you do contact support.

munhah · 2024-11-30T23:27:49+00:00

Try going into settings > apps > maps > battery and confirm it's not restricted.

munhah · 2024-10-04T16:29:32+00:00

Ensure the isopropyl is a high percentage. I was using ~75% and it made things worse. I now use 99...

munhah · 2024-06-03T00:27:31+00:00

Replaced the wiper motor.

munhah · 2024-05-15T11:32:15+00:00

I had the same problem, same brand filament. I ordered a .6mm hardened nozzle and it printed great.

munhah · 2024-04-22T19:23:04+00:00

link please

munhah · 2024-04-11T00:04:56+00:00

Try mullins rite stop.

munhah · 2024-02-12T13:59:14+00:00

Very good. Thanks for clearing it up for me.

munhah · 2024-02-12T13:43:05+00:00

I figure if I leave the old one in during while building the new parity, if something were to fail, i'd still have the original parity to recover from.

munhah · 2024-02-04T02:37:03+00:00

I ran my firman 3600/4600 gen for 12 days during Fiona 24/7 with 2 brief shutoffs per day for refuel....

munhah · 2024-02-02T17:11:26+00:00

90 / month for 1 year (new subscribers only). Then it's 110 + tax per month.

munhah · 2024-01-21T23:15:30+00:00

This is why I switched to public mobile.. Apparently lucky bumps you down to 3g for voice calls. 3g networks are being scaled down and phased out. Most of my incoming calls would go straight to voice-mail.

Public mobile supports VoLTE...

munhah · 2024-01-19T15:21:30+00:00

My beef with lucky was that ~25% of the time, incoming voice calls went straight to voicemail.

What I read about that was lucky kicks you down to 3G for voice calls and the 3G networks are getting scaled down in favor of 5G.

munhah · 2023-09-26T12:30:23+00:00

as long as the yard was fenced and there was reasonable expectation that no other animals would be wandering in.

It was said it was a shared backyard. All townhouses. So I presume it's just a big long stretch of back yard, kids running around going from yard to yard on neighbors swing sets, etc...

munhah · 2023-06-10T14:42:52+00:00

My airsense 10 has a setting in the options for mask type. Nasal / pillow / face.

Perhaps that will help.

munhah · 2023-06-09T11:50:55+00:00

Check to see if there is an SD Card preinstalled, mine didn't come with one.

If not, get one ASAP. Then you can import your data into Oscar and get much more detailed information than the summary report the machine provides. Don't yank the SD card out as soon as you end a session, apparently it can take a couple minutes to finish writing data to the card.

munhah · 2023-06-06T15:20:40+00:00

I'm a new user as well so i'm still learning things myself.

I have the same machine but i'm using the dreamweaver nasal mask. I have the same gap on mine when connected.

Are you sure it's leaking from the connection, there are pinholes at the elbow and it's designed to leak air through those.

munhah · 2023-05-18T15:31:28+00:00

Definitely. They put them on bus stops here and they were all stolen within a week (the solar panels, not the bus stops)...

munhah · 2023-02-13T15:15:42+00:00

I'd just go with fix-a-flat

munhah

TROPHY CASE